Re: [hylafax-users] (no subject)

[Ron Rosson <insane@oneinsane.net>]

That is what I had when I emailed the mailing list. Here is a copy of
my qpage.cf file that did work before I added hylafax.

administrator=insane@.oneinsane.net

queuedir=/var/spool/qpage

identtimeout=5
snpptimeout=60

service=PacBellPCS
        device=/dev/cuaa0
        dialcmd=ATDT18886007267
        maxmsgsize=240
        baudrate=1200
        parity=even
        allowpid=yes
        maxtries=6

pager=ron
        pagerid=1XXXXXX1511
        service=PacBellPCS


STill hoping to find a solution.

-Ron

rob.leadbeater@lynx.co.uk writes:
 > Looking at my config, I just needed the pagingProtocol line, not the pagerTTYParity one...
 > 
 > If qpage works, then can you work out what config that has got and replicate it under Hylafax ?
 > 
 > 
 > Regards,
 > 
 > Rob
 > 
 >  -----Original Message-----
 > From: insane@oneinsane.net [SMTP:insane@oneinsane.net]
 > Sent: Wednesday, January 09, 2002 2:48 PM
 > To: Rob Leadbeater
 > Cc: hylafax-users@hylafax.org
 > Subject: Re: [hylafax-users] (no subject)
 > Still no go and here is the contents of the file that is in the info dir:
 > 
 > supportsHighRes:yes
 > supports2DEncoding:yes
 > supportsPostScript:no
 > calledBefore:yes
 > maxPageWidth:2432
 > maxPageLength:-1
 > maxSignallingRate:"14400"
 > minScanlineTime:"0ms"
 > remoteCSI:""
 > sendFailures:20
 > lastSendFailure:"No initial ID response from paging central"
 > dialFailures:0
 > lastDialFailure:"Unknown problem (check modem power)"
 > &pagerTTYParity:"none"
 > &pagingProtocol:"ixo"
 > 
 > 
 > TIA
 >  -Ron
 > 
 > rob.leadbeater@lynx.co.uk said:
 > 
 > > Hi Ron,
 > > > Have you read the sendpage HowTo at
 > http://www.hylafax.org/HylaFAQ/Q501.php ?
 > > > This mentions the problem you're getting.
 > > From memory when I set up the SMS stuff on our Hylafax server, the
 > instructions seemed a little ambiguous, so if you get stuck let me know...
 > > > Regards,
 > > > Rob
 > > >  -----Original Message-----
 > > From: insane@oneinsane.net [SMTP:insane@oneinsane.net]
 > > Sent: Wednesday, January 09, 2002 12:24 AM
 > > To: hylafax-users@hylafax.org
 > > Subject: [hylafax-users] (no subject)
 > > > I am trying to set my hylafax server to send SMS pages to my PACBELL
 > > PCS phone. (Qpage does this fine) I got it to dail but for some reason
 > > the hylafax software is expecting some kind of identifier from the SMS
 > > terminal my modem connects in to. Here is the log of the call
 > > > Jan 02 00:15:46.19: [18421]: SESSION BEGIN 00000054 18886007267
 > > Jan 02 00:15:46.19: [18421]: SEND PAGE: JOB 26 DEST 18886007267 COMMID
 > > 00000054
 > > Jan 02 00:15:46.19: [18421]: DELAY 75 ms
 > > Jan 02 00:15:46.28: [18421]: DELAY 2600 ms
 > > Jan 02 00:15:48.89: [18421]: <-- [4:ATZ\r]
 > > Jan 02 00:15:49.22: [18421]: --> [3:ATZ]
 > > Jan 02 00:15:49.22: [18421]: --> [2:OK]
 > > Jan 02 00:15:49.22: [18421]: <-- [5:ATE0\r]
 > > Jan 02 00:15:49.38: [18421]: --> [4:ATE0]
 > > Jan 02 00:15:49.38: [18421]: --> [2:OK]
 > > Jan 02 00:15:49.38: [18421]: <-- [5:ATV1\r]
 > > Jan 02 00:15:49.54: [18421]: --> [2:OK]
 > > Jan 02 00:15:49.54: [18421]: <-- [7:ATQ0X4\r]
 > > Jan 02 00:15:49.70: [18421]: --> [2:OK]
 > > Jan 02 00:15:49.70: [18421]: <-- [7:ATS0=0\r]
 > > Jan 02 00:15:49.86: [18421]: --> [2:OK]
 > > Jan 02 00:15:49.86: [18421]: <-- [7:ATS8=2\r]
 > > Jan 02 00:15:50.02: [18421]: --> [2:OK]
 > > Jan 02 00:15:50.02: [18421]: <-- [8:ATS7=60\r]
 > > Jan 02 00:15:50.19: [18421]: --> [2:OK]
 > > Jan 02 00:15:50.19: [18421]: <-- [12:AT&H1&I0&R2\r]
 > > Jan 02 00:15:50.36: [18421]: --> [2:OK]
 > > Jan 02 00:15:50.36: [18421]: <-- [11:ATS13=1&D2\r]
 > > Jan 02 00:15:50.53: [18421]: --> [2:OK]
 > > Jan 02 00:15:50.53: [18421]: <-- [6:AT&C1\r]
 > > Jan 02 00:15:50.69: [18421]: --> [2:OK]
 > > Jan 02 00:15:50.69: [18421]: <-- [5:ATM0\r]
 > > Jan 02 00:15:50.85: [18421]: --> [2:OK]
 > > Jan 02 00:15:50.85: [18421]: <-- [12:AT+FCLASS=0\r]
 > > Jan 02 00:15:51.00: [18421]: --> [2:OK]
 > > Jan 02 00:15:51.00: [18421]: <-- [12:AT&N2&K0&M0\r]
 > > Jan 02 00:15:51.27: [18421]: --> [2:OK]
 > > Jan 02 00:15:51.27: [18421]: DIAL 18886007267
 > > Jan 02 00:15:51.27: [18421]: <-- [16:ATDT18886007267\r]
 > > Jan 02 00:16:05.24: [18421]: --> [12:CONNECT 1200]
 > > Jan 02 00:16:05.24: [18421]: EXPECT ID (paging central identification)
 > > Jan 02 00:16:20.39: [18421]: RECVunknown paging central response: Jan 02
 > > 00:16:22.41: [18421]: RECVunknown paging central response: Jan 02
 > > 00:16:25.44: [18421]: PAGE FAILED: No initial ID response from paging
 > cen
 > > tral
 > > Jan 02 00:16:25.44: [18421]: <-- [5:ATH0\r]
 > > Jan 02 00:16:30.45: [18421]: MODEM <Timeout>
 > > Jan 02 00:16:30.45: [18421]: SESSION END
 > > > > Does anyone know of a way to get this to work.
 > > > TIA
 > > > > > This message is intended only for the use of the person(s) ("The
 > intended
 > > Recipient(s)") to whom it is addressed.  It may contain information
 > which
 > > is privileged and confidential within the meaning of applicable law.  If
 > > you are not the intended recipient, please contact the sender as soon as
 > > possible.  The views expressed in this communication are not necessarily
 > > those held by LYNX Express Limited.
 > > >
 > 
 > 
 > 
 > 
 >  --
 >  -------------------------------------------------------------------------- 
 > 
 >  ----
 > 
 > Ron Rosson                                    ... and a UNIX user said
 > ... The InSaNe One                                        rm -rf *
 > insane@oneinsane.net                 and all was /dev/null and *void()
 >  -------------------------------------------------------------------------- 
 > 
 >  ----
 > 
 > 
 > 
 > 
 > ____________________ HylaFAX(tm) Users Mailing List
 > _______________________
 >  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
 > /dev/null
 > 
 > 
 > 
 > 
 > This message is intended only for the use of the person(s) ("The intended
 > Recipient(s)") to whom it is addressed.  It may contain information which
 > is privileged and confidential within the meaning of applicable law.  If
 > you are not the intended recipient, please contact the sender as soon as
 > possible.  The views expressed in this communication are not necessarily
 > those held by LYNX Express Limited.
 > 

-- 
------------------------------------------------------------------------------
Ron Rosson                                    ... and a UNIX user said ...
The InSaNe One                                        rm -rf *
insane@oneinsane.net                        and all was /dev/null and *void()
------------------------------------------------------------------------------



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null