Re: [hylafax-users] (no subject)

[Ron Rosson <insane@oneinsane.net>]

Still no go and here is the contents of the file that is in the info dir:

supportsHighRes:yes
supports2DEncoding:yes
supportsPostScript:no
calledBefore:yes
maxPageWidth:2432
maxPageLength:-1
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:""
sendFailures:20
lastSendFailure:"No initial ID response from paging central"
dialFailures:0
lastDialFailure:"Unknown problem (check modem power)"
&pagerTTYParity:"none"
&pagingProtocol:"ixo"


TIA
-Ron

rob.leadbeater@lynx.co.uk said:

> Hi Ron,
> 
> Have you read the sendpage HowTo at
http://www.hylafax.org/HylaFAQ/Q501.php ?
> 
> This mentions the problem you're getting.
> From memory when I set up the SMS stuff on our Hylafax server, the
instructions seemed a little ambiguous, so if you get stuck let me know...
> 
> Regards,
> 
> Rob
> 
>  -----Original Message-----
> From: insane@oneinsane.net [SMTP:insane@oneinsane.net]
> Sent: Wednesday, January 09, 2002 12:24 AM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] (no subject)
> 
> I am trying to set my hylafax server to send SMS pages to my PACBELL
> PCS phone. (Qpage does this fine) I got it to dail but for some reason
> the hylafax software is expecting some kind of identifier from the SMS
> terminal my modem connects in to. Here is the log of the call
> 
> Jan 02 00:15:46.19: [18421]: SESSION BEGIN 00000054 18886007267
> Jan 02 00:15:46.19: [18421]: SEND PAGE: JOB 26 DEST 18886007267 COMMID
> 00000054
> Jan 02 00:15:46.19: [18421]: DELAY 75 ms
> Jan 02 00:15:46.28: [18421]: DELAY 2600 ms
> Jan 02 00:15:48.89: [18421]: <-- [4:ATZ\r]
> Jan 02 00:15:49.22: [18421]: --> [3:ATZ]
> Jan 02 00:15:49.22: [18421]: --> [2:OK]
> Jan 02 00:15:49.22: [18421]: <-- [5:ATE0\r]
> Jan 02 00:15:49.38: [18421]: --> [4:ATE0]
> Jan 02 00:15:49.38: [18421]: --> [2:OK]
> Jan 02 00:15:49.38: [18421]: <-- [5:ATV1\r]
> Jan 02 00:15:49.54: [18421]: --> [2:OK]
> Jan 02 00:15:49.54: [18421]: <-- [7:ATQ0X4\r]
> Jan 02 00:15:49.70: [18421]: --> [2:OK]
> Jan 02 00:15:49.70: [18421]: <-- [7:ATS0=0\r]
> Jan 02 00:15:49.86: [18421]: --> [2:OK]
> Jan 02 00:15:49.86: [18421]: <-- [7:ATS8=2\r]
> Jan 02 00:15:50.02: [18421]: --> [2:OK]
> Jan 02 00:15:50.02: [18421]: <-- [8:ATS7=60\r]
> Jan 02 00:15:50.19: [18421]: --> [2:OK]
> Jan 02 00:15:50.19: [18421]: <-- [12:AT&H1&I0&R2\r]
> Jan 02 00:15:50.36: [18421]: --> [2:OK]
> Jan 02 00:15:50.36: [18421]: <-- [11:ATS13=1&D2\r]
> Jan 02 00:15:50.53: [18421]: --> [2:OK]
> Jan 02 00:15:50.53: [18421]: <-- [6:AT&C1\r]
> Jan 02 00:15:50.69: [18421]: --> [2:OK]
> Jan 02 00:15:50.69: [18421]: <-- [5:ATM0\r]
> Jan 02 00:15:50.85: [18421]: --> [2:OK]
> Jan 02 00:15:50.85: [18421]: <-- [12:AT+FCLASS=0\r]
> Jan 02 00:15:51.00: [18421]: --> [2:OK]
> Jan 02 00:15:51.00: [18421]: <-- [12:AT&N2&K0&M0\r]
> Jan 02 00:15:51.27: [18421]: --> [2:OK]
> Jan 02 00:15:51.27: [18421]: DIAL 18886007267
> Jan 02 00:15:51.27: [18421]: <-- [16:ATDT18886007267\r]
> Jan 02 00:16:05.24: [18421]: --> [12:CONNECT 1200]
> Jan 02 00:16:05.24: [18421]: EXPECT ID (paging central identification)
> Jan 02 00:16:20.39: [18421]: RECVunknown paging central response: Jan 02
> 00:16:22.41: [18421]: RECVunknown paging central response: Jan 02
> 00:16:25.44: [18421]: PAGE FAILED: No initial ID response from paging cen
> tral
> Jan 02 00:16:25.44: [18421]: <-- [5:ATH0\r]
> Jan 02 00:16:30.45: [18421]: MODEM <Timeout>
> Jan 02 00:16:30.45: [18421]: SESSION END
> 
> 
> Does anyone know of a way to get this to work.
> 
> TIA
> 
> 
> 
> This message is intended only for the use of the person(s) ("The intended
> Recipient(s)") to whom it is addressed.  It may contain information which
> is privileged and confidential within the meaning of applicable law.  If
> you are not the intended recipient, please contact the sender as soon as
> possible.  The views expressed in this communication are not necessarily
> those held by LYNX Express Limited.
> 
> 




-- 
------------------------------------------------------------------------------

Ron Rosson                                    ... and a UNIX user said ... 
The InSaNe One                                        rm -rf * 
insane@oneinsane.net                 and all was /dev/null and *void() 
------------------------------------------------------------------------------




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null