Re: [hylafax-users] Problems receiving faxes.

[Poirier Xavier <xpoirier@ch-bourg01.fr>]

En réponse à "Hector J Cartagena Gzz." <hcartagena@optiosoftware.com.mx>:

I'm not a specialist but, why :
RECV: 0 total lines, 0 bad lines, 0 consecutive
especialy "0 total lines" lets me interogative.
()


> Hi,
> 
> I've installed Hylafax v4.1 on Red Hat Linux 7.0, and got it to work. I
> can
> send faxes with no problem at all, but when I receive faxes I only get
> the
> top Tag Line for every page received. I've tried receiving faxes through
> two
> fax machines and 3 pc's with diferent fax software and I always get the
> same
> result.
> 
> Nov 21 16:33:43.60: [ 1716]: SESSION BEGIN 00000010 528183475231
> Nov 21 16:33:43.60: [ 1716]: <-- [4:ATA\r]
> Nov 21 16:33:47.33: [ 1716]: --> [3:FAX]
> Nov 21 16:33:47.33: [ 1716]: ANSWER: FAX CONNECTION
> Nov 21 16:33:47.33: [ 1716]: RECV FAX: begin
> Nov 21 16:33:54.72: [ 1716]: --> [5:	§½}æ]
> Nov 21 16:33:54.72: [ 1716]: --> [29:+FTSI: "                    "]
> Nov 21 16:33:54.72: [ 1716]: REMOTE TSI ""
> Nov 21 16:33:55.61: [ 1716]: --> [22:+FDCS: 1,5,0,0,0,0,0,0]
> Nov 21 16:33:55.61: [ 1716]: REMOTE wants 14400 bit/s
> Nov 21 16:33:55.61: [ 1716]: REMOTE wants page width 1728 pixels in 215
> mm
> Nov 21 16:33:55.61: [ 1716]: REMOTE wants A4 page length (297 mm)
> Nov 21 16:33:55.61: [ 1716]: REMOTE wants 7.7 line/mm
> Nov 21 16:33:55.61: [ 1716]: REMOTE wants 1-D MR
> Nov 21 16:33:55.61: [ 1716]: --> [2:OK]
> Nov 21 16:33:55.61: [ 1716]: <-- [7:AT+FDR\r]
> Nov 21 16:33:58.53: [ 1716]: --> [5:+FCFR]
> Nov 21 16:34:00.60: [ 1716]: --> [22:+FDCS: 1,5,0,0,0,0,0,0]
> Nov 21 16:34:00.60: [ 1716]: REMOTE wants 14400 bit/s
> Nov 21 16:34:00.60: [ 1716]: REMOTE wants page width 1728 pixels in 215
> mm
> Nov 21 16:34:00.60: [ 1716]: REMOTE wants A4 page length (297 mm)
> Nov 21 16:34:00.60: [ 1716]: REMOTE wants 7.7 line/mm
> Nov 21 16:34:00.60: [ 1716]: REMOTE wants 1-D MR
> Nov 21 16:34:00.60: [ 1716]: --> [7:CONNECT]
> Nov 21 16:34:00.60: [ 1716]: RECV: begin page
> Nov 21 16:34:00.60: [ 1716]: RECV: send trigger 021
> Nov 21 16:34:00.60: [ 1716]: <-- data [1]
> Nov 21 16:34:20.54: [ 1716]: RECV: 0 total lines, 0 bad lines, 0
> consecutive
> bad lines
> Nov 21 16:34:20.54: [ 1716]: --> [17:+FPTS: 1,2219,0,0]
> Nov 21 16:34:21.41: [ 1716]: --> [7:+FET: 0]
> Nov 21 16:34:21.41: [ 1716]: RECV recv MPS (more pages, same document)
> Nov 21 16:34:21.52: [ 1716]: --> [2:OK]
> Nov 21 16:34:21.52: [ 1716]: RECV send MCF (message confirmation)
> Nov 21 16:34:21.52: [ 1716]: RECV FAX (00000010): from , page 1 in 0:26,
> A4,
> 7.7 line/mm, 1-D MR, 14400 bit/s
> Nov 21 16:34:21.52: [ 1716]: <-- [7:AT+FDR\r]
> Nov 21 16:34:23.65: [ 1716]: --> [7:CONNECT]
> Nov 21 16:34:23.65: [ 1716]: RECV: begin page
> Nov 21 16:34:23.65: [ 1716]: RECV: send trigger 021
> Nov 21 16:34:23.65: [ 1716]: <-- data [1]
> Nov 21 16:34:45.06: [ 1716]: RECV: 0 total lines, 0 bad lines, 0
> consecutive
> bad lines
> Nov 21 16:34:45.06: [ 1716]: --> [17:+FPTS: 1,2219,0,0]
> Nov 21 16:34:45.93: [ 1716]: --> [7:+FET: 0]
> Nov 21 16:34:45.93: [ 1716]: RECV recv MPS (more pages, same document)
> Nov 21 16:34:46.04: [ 1716]: --> [2:OK]
> Nov 21 16:34:46.04: [ 1716]: RECV send MCF (message confirmation)
> Nov 21 16:34:46.04: [ 1716]: RECV FAX (00000010): from , page 2 in 0:25,
> A4,
> 7.7 line/mm, 1-D MR, 14400 bit/s
> Nov 21 16:34:46.04: [ 1716]: <-- [7:AT+FDR\r]
> Nov 21 16:34:48.16: [ 1716]: --> [7:CONNECT]
> Nov 21 16:34:48.16: [ 1716]: RECV: begin page
> Nov 21 16:34:48.16: [ 1716]: RECV: send trigger 021
> Nov 21 16:34:48.16: [ 1716]: <-- data [1]
> Nov 21 16:35:18.36: [ 1716]: RECV: 0 total lines, 0 bad lines, 0
> consecutive
> bad lines
> Nov 21 16:35:18.36: [ 1716]: --> [17:+FPTS: 1,2219,0,0]
> Nov 21 16:35:19.23: [ 1716]: --> [7:+FET: 0]
> Nov 21 16:35:19.23: [ 1716]: RECV recv MPS (more pages, same document)
> Nov 21 16:35:19.34: [ 1716]: --> [2:OK]
> Nov 21 16:35:19.34: [ 1716]: RECV send MCF (message confirmation)
> Nov 21 16:35:19.34: [ 1716]: RECV FAX (00000010): from , page 3 in 0:33,
> A4,
> 7.7 line/mm, 1-D MR, 14400 bit/s
> Nov 21 16:35:19.34: [ 1716]: <-- [7:AT+FDR\r]
> Nov 21 16:35:21.47: [ 1716]: --> [7:CONNECT]
> Nov 21 16:35:21.47: [ 1716]: RECV: begin page
> Nov 21 16:35:21.47: [ 1716]: RECV: send trigger 021
> Nov 21 16:35:21.47: [ 1716]: <-- data [1]
> Nov 21 16:35:40.19: [ 1716]: RECV: 0 total lines, 0 bad lines, 0
> consecutive
> bad lines
> Nov 21 16:35:40.19: [ 1716]: --> [17:+FPTS: 1,2219,0,0]
> Nov 21 16:35:41.16: [ 1716]: --> [7:+FET: 2]
> Nov 21 16:35:41.16: [ 1716]: RECV recv EOP (no more pages or documents)
> Nov 21 16:35:41.16: [ 1716]: --> [2:OK]
> Nov 21 16:35:41.16: [ 1716]: RECV send MCF (message confirmation)
> Nov 21 16:35:41.16: [ 1716]: RECV FAX (00000010): from , page 4 in 0:22,
> A4,
> 7.7 line/mm, 1-D MR, 14400 bit/s
> Nov 21 16:35:41.16: [ 1716]: RECV FAX (00000010): recvq/fax00008.tif
> from ,
> route to <unspecified>, 4 pages in 1:54
> Nov 21 16:35:41.16: [ 1716]: <-- [7:AT+FDR\r]
> Nov 21 16:35:44.22: [ 1716]: --> [8:+FHNG: 0]
> Nov 21 16:35:44.22: [ 1716]: REMOTE HANGUP: Normal and proper end of
> connection (code 0)
> Nov 21 16:35:44.22: [ 1716]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif"
> "ttyS0" "00000010" ""
> Nov 21 16:35:44.55: [ 1716]: RECV FAX: end
> Nov 21 16:35:44.55: [ 1716]: SESSION END
> 



Xavier 
mailto: xpoirier@ch-bourg01.fr



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null