[hylafax-users] Receiving Half a Page

[<komunikation@dccnet.com>]

Hi there I'm having a problem receiving faxes, faxing out works just fine,
When receiving a fax the hylafax picks up a call and answers than
terminates normally but when I view the fax only a quater of a page showes
up, below is the log of the transmission, can u help please

Nov 11 16:34:53.25: [  460]: SESSION BEGIN 00000012 16046045918635
Nov 11 16:34:53.25: [  460]: <-- [4:ATA\r]
Nov 11 16:34:54.69: [  460]: --> [3:FAX]
Nov 11 16:34:54.69: [  460]: ANSWER: FAX CONNECTION
Nov 11 16:34:54.69: [  460]: RECV FAX: begin
Nov 11 16:34:54.69: [  460]: RECV FAX: CDPN
Nov 11 16:35:05.15: [  460]: --> [5:+FCON]
Nov 11 16:35:06.76: [  460]: --> [29:+FTSI: "      1 503 588 6768"]
Nov 11 16:35:06.76: [  460]: REMOTE TSI "1 503 588 6768"
Nov 11 16:35:07.15: [  460]: --> [22:+FDCS: 1,5,0,2,0,0,0,1]
Nov 11 16:35:07.15: [  460]: REMOTE wants 14400 bit/s
Nov 11 16:35:07.15: [  460]: REMOTE wants page width 1728 pixels in 215 mm
Nov 11 16:35:07.15: [  460]: REMOTE wants unlimited page length
Nov 11 16:35:07.15: [  460]: REMOTE wants 7.7 line/mm
Nov 11 16:35:07.15: [  460]: REMOTE wants 1-D MR
Nov 11 16:35:07.15: [  460]: --> [2:OK]
Nov 11 16:35:07.15: [  460]: <-- [7:AT+FDR\r]
Nov 11 16:35:10.05: [  460]: --> [5:+FCFR]
Nov 11 16:35:12.15: [  460]: --> [22:+FDCS: 1,5,0,2,0,0,0,1]
Nov 11 16:35:12.15: [  460]: REMOTE wants 14400 bit/s
Nov 11 16:35:12.15: [  460]: REMOTE wants page width 1728 pixels in 215 mm
Nov 11 16:35:12.15: [  460]: REMOTE wants unlimited page length
Nov 11 16:35:12.15: [  460]: REMOTE wants 7.7 line/mm
Nov 11 16:35:12.15: [  460]: REMOTE wants 1-D MR
Nov 11 16:35:12.15: [  460]: --> [7:CONNECT]
Nov 11 16:35:12.15: [  460]: RECV: begin page
Nov 11 16:35:12.15: [  460]: RECV: send trigger 021
Nov 11 16:35:12.15: [  460]: <-- data [1]
Nov 11 16:35:52.80: [  460]: RECV: 391 total lines, 0 bad lines, 0
consecutive bad lines
Nov 11 16:35:52.80: [  460]: --> [17:+FPTS: 1,2219,0,0]
Nov 11 16:35:56.21: [  460]: --> [7:+FET: 2]
Nov 11 16:35:56.21: [  460]: RECV recv EOP (no more pages or documents)
Nov 11 16:35:56.21: [  460]: --> [2:OK]
Nov 11 16:35:56.21: [  460]: RECV send MCF (message confirmation)
Nov 11 16:35:56.21: [  460]: RECV FAX (00000012): from 1 503 588 6768,
page 1 in 0:49, INF, 7.7 line/mm, 1-D MR
Nov 11 16:35:56.21: [  460]: RECV FAX (00000012): recvq/fax00004.tif from
1 503 588 6768, route to <unspecified>, 1 pages in 1:02
Nov 11 16:35:56.23: [  460]: <-- [7:AT+FDR\r]
Nov 11 16:35:58.91: [  460]: --> [8:+FHNG: 0]
Nov 11 16:35:58.91: [  460]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Nov 11 16:35:58.91: [  460]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif"
"ttyS1" "00000012" "" ""
Nov 11 16:36:00.63: [  460]: RECV FAX: end
Nov 11 16:36:00.63: [  460]: SESSION END


Any help would be appreciated :)





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null