[hylafax-users] was a problem with squashed pages. now, no pages going at all

[Burgess Patterson <burg@papegaai.net>]

Hi All

Using: SuSE 7.1, USR 56K External (dunno exact model but a good 2-3
years old now) and Hylafax version that came with SuSE (pretty recent I
should think)

I've searched the net for help and am not getting very far. Problem was
that faxes were being sent thru Hylafax and being received as a squashed
mess. However, one or two times, the pages came out OK. I was faxing
from Word 2000 via WHFC. Have done faxaddmodem countless time from 2.0,
to 1 and back and forth, tried other people config files - and same
problem.

Faxes receive just fine (its currently set up receiving only until I can
sort out outgoing...

I did the USR class 2.0 change and have tried the Class2DDISCmd:AT+FDIS
or "" entry in config (though not really 100% sure exactly what the
workaround is). Now, faxes dont seem to be leaving at all!! Pasted below
snippet form the log.

Nov 10 14:04:19 regenesys02 FaxSend[4900]: <--
[23:AT+FCC=1,5,2,2,0,0,0,0\r]
Nov 10 14:04:19 regenesys02 FaxSend[4900]: --> [2:OK]
Nov 10 14:04:19 regenesys02 FaxSend[4900]: MODEM U.S. ROBOTICS 56K VOICE
/
Nov 10 14:04:19 regenesys02 FaxSend[4900]: <-- [7:ATL1M1\r]
Nov 10 14:04:19 regenesys02 FaxSend[4900]: --> [2:OK]
Nov 10 14:04:19 regenesys02 FaxSend[4900]: MODEM input buffering
disabled
Nov 10 14:04:19 regenesys02 FaxSend[4900]: SEND FAX: JOB 60 DEST
0118028527 COMMID 00000106
Nov 10 14:04:43 regenesys02 FaxSend[4900]: Client does not support
document page width, max remote page width 1728 pixels, image width 1734
pixels
Nov 10 14:04:43 regenesys02 FaxQueuer[77]: JOB 60 (active dest
+27118028527 pri 127 tts 0:00 killtime 2:59:23): CMD DONE: exit status
0x300
Nov 10 14:04:43 regenesys02 FaxQueuer[77]: JOB 60 (ready dest
+27118028527 pri 126 tts 0:00 killtime 2:59:23): SEND INCOMPLETE: retry
immediately; Client d$

It looks a bit like a compression or image resolution issue. How/where
can I change the pixels, if this is the problem?

Any ideas anyone?

Thanks

Burgess


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null