[hylafax-users] fax sending problem

["Erol YILDIZ" <erol@kemerkoy.k12.tr>]

Hi,

 

I have setup Hylafax fax server over SuSE 7.2. When I send faxes from a client, it calls the remote fax machine and after the handshake they cut off the line. the log file of one of them is below. If someone has an idea, please reply. (I have tried 2 different modems, same thing happened)

 

Thanks

 

Aug 26 05:36:59.24: [ 2935]: --> [2:OK]                                        
Aug 26 05:36:59.24: [ 2935]: REMOTE CSI "90 212 2398167"                       
Aug 26 05:36:59.24: [ 2935]: <-- [9:AT+FRH=3\r]                                
Aug 26 05:36:59.27: [ 2935]: --> [7:CONNECT]                                   
Aug 26 05:36:59.59: [ 2935]: --> [2:OK]                                        
Aug 26 05:36:59.59: [ 2935]: REMOTE best rate 9600 bit/s                       
Aug 26 05:36:59.59: [ 2935]: REMOTE max page width 1728 pixels in 215 mm       
Aug 26 05:36:59.59: [ 2935]: REMOTE max unlimited page length                  
Aug 26 05:36:59.59: [ 2935]: REMOTE best vres 7.7 line/mm                      
Aug 26 05:36:59.59: [ 2935]: REMOTE best format 1-D MR                         
Aug 26 05:36:59.59: [ 2935]: REMOTE best 20 ms, 10 ms/scanline                 
Aug 26 05:36:59.59: [ 2935]: USE 9600 bit/s                                    
Aug 26 05:36:59.59: [ 2935]: USE 20 ms, 10 ms/scanline                         
Aug 26 05:36:59.59: [ 2935]: <-- [9:AT+FTH=3\r]                                
Aug 26 05:36:59.65: [ 2935]: --> [7:CONNECT]                                   
Aug 26 05:36:59.65: [ 2935]: <-- data [3]                                      
Aug 26 05:36:59.65: [ 2935]: <-- data [2]                                      
Aug 26 05:37:00.97: [ 2935]: --> [2:OK]                                        
Aug 26 05:37:00.97: [ 2935]: <-- [5:ATH0\r]                                    
Aug 26 05:37:01.68: [ 2935]: --> [2:OK]                                        
Aug 26 05:37:01.68: [ 2935]: SESSION END