[hylafax-users] Unspecified Phase C error, including too much delay between TCF and +FDR command

[Alexandr Litvin <postmaster@resourcecorp.net>]

some times when i receive fax,  Hylafax send me this this error:
 Unspecified Phase C error, including too much delay between TCF and
+FDR command


Oct 17 11:03:19.31: [18190]: SESSION BEGIN 00000439 380444445566
Oct 17 11:03:19.31: [18190]: <-- [4:ATA\r]
Oct 17 11:03:38.04: [18190]: --> [5:+FCON]
Oct 17 11:03:38.04: [18190]: ANSWER: FAX CONNECTION
Oct 17 11:03:38.04: [18190]: RECV FAX: begin
Oct 17 11:03:39.73: [18190]: --> [29:+FTSI: "        +06565 45566"]
Oct 17 11:03:39.73: [18190]: REMOTE TSI "+06565 23736"
Oct 17 11:03:40.10: [18190]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Oct 17 11:03:40.10: [18190]: REMOTE wants 9600 bit/s
Oct 17 11:03:40.10: [18190]: REMOTE wants page width 1728 pixels in 215 mm
Oct 17 11:03:40.10: [18190]: REMOTE wants unlimited page length 
Oct 17 11:03:40.10: [18190]: REMOTE wants 3.85 line/mm
Oct 17 11:03:40.10: [18190]: REMOTE wants 1-D MR
Oct 17 11:03:40.22: [18190]: --> [2:OK]
Oct 17 11:03:40.22: [18190]: <-- [7:AT+FDR\r]
Oct 17 11:03:45.82: [18190]: --> [29:+FTSI: "        +06565 45566"]
Oct 17 11:03:45.82: [18190]: REMOTE TSI "+06565 45566"
Oct 17 11:03:51.89: [18190]: --> [29:+FTSI: "        +06565 45566"]
Oct 17 11:03:51.89: [18190]: REMOTE TSI "+06565 45566"
Oct 17 11:04:00.56: [18190]: --> [29:+FTSI: "        +06565 45566"]
Oct 17 11:04:00.56: [18190]: REMOTE TSI "+06565 45566"
Oct 17 11:04:03.56: [18190]: --> [5:+FCFR]
Oct 17 11:04:06.30: [18190]: --> [22:+FDCS: 0,0,0,2,0,0,0,0]
Oct 17 11:04:06.30: [18190]: REMOTE wants 2400 bit/s
Oct 17 11:04:06.30: [18190]: REMOTE wants page width 1728 pixels in 215 mm
Oct 17 11:04:06.30: [18190]: REMOTE wants unlimited page length 
Oct 17 11:04:06.30: [18190]: REMOTE wants 3.85 line/mm
Oct 17 11:04:06.30: [18190]: REMOTE wants 1-D MR
Oct 17 11:04:06.30: [18190]: --> [7:CONNECT]
Oct 17 11:04:06.30: [18190]: RECV: begin page
Oct 17 11:04:06.30: [18190]: RECV: send trigger 021
Oct 17 11:04:18.10: [18190]: RECV: 88 total lines, 1 bad lines, 1 consecutive 
bad lines
Oct 17 11:04:18.21: [18190]: --> [17:+FPTS: 1,2219,0,0]
Oct 17 11:04:48.22: [18190]: MODEM <Timeout>
Oct 17 11:04:48.22: [18190]: REMOTE HANGUP: Unspecified Phase C error, 
including too much delay between TCF and +FDR command (code 90)
Oct 17 11:04:48.22: [18190]: RECV FAX (00000439): recvq/fax00098.tif from 
+06565 23736, route to <unspecified>, 0 pages in 1:10
Oct 17 11:04:48.22: [18190]: RECV FAX: Unspecified Phase C error, including 
too much delay between TCF and +FDR command
Oct 17 11:04:48.22: [18190]: <-- [6:AT+FK\r]
Oct 17 11:04:53.68: [18190]: --> [10:+FHNG: 101]
Oct 17 11:04:53.68: [18190]: REMOTE HANGUP: RSPREC invalid response received 
(code 101)
Oct 17 11:04:55.12: [18190]: --> [2:OK]
Oct 17 11:04:55.13: [18190]: RECV FAX (00000439): session with +06565 23736 
terminated abnormally: Unspecified Phase C error, including too much delay 
between TCF and +FDR command
Oct 17 11:04:55.13: [18190]: RECV FAX: bin/faxrcvd "recvq/fax00098.tif" 
"cuaa1" "00000439" "Unspecified Phase C error, including too much delay 
between TCF and +FDR command"

on FreeBSD 4.2 modem IDC-2814BXL/VR

Thanks.

Alexandr Litvin.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null