Re: [hylafax-users] problem faxing with window98 client to halifax server

["Junaidi Sapari" <suicidal@pacific.net.sg>]

I am using WHFC, windows halifax client from transcom.

-----Original Message-----
From: "S. Ancelot" <sancelot@online.fr>
Date: Thu, 11 Oct 2001 19:32:28 +0200
To: Junaidi Sapari <suicidal@pacific.net.sg>
Subject: Re: [hylafax-users] problem faxing with window98 client to halifax server


> What do you use to send fax from win machine ???
> 
> Junaidi Sapari wrote:
> 
> > Hi, can anybody help
> >
> > There is no problem if i were to send fax with the server using the command line.
> > But if i were to use a client windows98 machine to send fax to my linux halifax server to another destination, the log shows ATH0/r, hanging up. Below is the log.
> >
> > Oct 11 15:00:53.67: [ 2407]: SESSION BEGIN 00000016 654155570926
> > Oct 11 15:00:53.67: [ 2407]: HylaFAX (tm) Version 4.1
> > Oct 11 15:00:53.67: [ 2407]: SEND FAX: JOB 14 DEST 5570926 COMMID 00000016
> > Oct 11 15:00:53.67: [ 2407]: DEVICE '/dev/ttyS0'      Oct 11 15:00:53.67: [ 2407]: DELAY 75 ms
> > Oct 11 15:00:53.75: [ 2407]: DELAY 2600 ms
> > Oct 11 15:00:56.35: [ 2407]: <-- [4:ATZ\r]
> > Oct 11 15:00:56.46: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.46: [ 2407]: <-- [5:ATE0\r]
> > Oct 11 15:00:56.47: [ 2407]: --> [4:ATE0]
> > Oct 11 15:00:56.47: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.47: [ 2407]: <-- [5:ATV1\r]
> > Oct 11 15:00:56.48: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.48: [ 2407]: <-- [5:ATQ0\r]
> > Oct 11 15:00:56.49: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.49: [ 2407]: <-- [7:ATS0=0\r]
> > Oct 11 15:00:56.50: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.50: [ 2407]: <-- [7:ATS8=2\r]
> > Oct 11 15:00:56.51: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.51: [ 2407]: <-- [8:ATS7=60\r]
> > Oct 11 15:00:56.52: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.52: [ 2407]: <-- [6:AT&K4\r]
> > Oct 11 15:00:56.53: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.53: [ 2407]: <-- [6:AT&D3\r]
> > Oct 11 15:00:56.54: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.54: [ 2407]: <-- [6:AT&C1\r]
> > Oct 11 15:00:56.55: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.55: [ 2407]: <-- [12:AT+FCLASS=2\r]
> > Oct 11 15:00:56.56: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.56: [ 2407]: <-- [10:AT+FTBC=0\r]
> > Oct 11 15:00:56.57: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.57: [ 2407]: <-- [10:AT+FBOR=0\r]
> > Oct 11 15:00:56.58: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.58: [ 2407]: <-- [13:AT+FPHCTO=30\r]
> > Oct 11 15:00:56.59: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.59: [ 2407]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> > Oct 11 15:00:56.60: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.60: [ 2407]: <-- [7:ATL2M1\r]
> > Oct 11 15:00:56.61: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.61: [ 2407]: <-- [12:AT+FCLASS=2\r]
> > Oct 11 15:00:56.72: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.72: [ 2407]: <-- [10:AT+FTBC=0\r]
> > Oct 11 15:00:56.83: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.83: [ 2407]: <-- [10:AT+FBOR=0\r]
> > Oct 11 15:00:56.94: [ 2407]: --> [2:OK]
> > Oct 11 15:00:56.94: [ 2407]: <-- [13:AT+FPHCTO=30\r]
> > Oct 11 15:00:57.05: [ 2407]: --> [2:OK]
> > Oct 11 15:00:57.05: [ 2407]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> > Oct 11 15:00:57.16: [ 2407]: --> [2:OK]
> > Oct 11 15:00:57.16: [ 2407]: <-- [23:AT+FLID="NothingSetup"\r]
> > Oct 11 15:00:57.27: [ 2407]: --> [2:OK]
> > Oct 11 15:00:57.27: [ 2407]: DIAL 5570926
> > Oct 11 15:00:57.27: [ 2407]: <-- [12:ATDT5570926\r]
> > Oct 11 15:01:09.85: [ 2407]: --> [5:+FCON]
> > Oct 11 15:01:12.91: [ 2407]: --> [29:+FCSI: " 5570926"]
> > Oct 11 15:01:12.91: [ 2407]: REMOTE CSI "5570926"
> > Oct 11 15:01:13.37: [ 2407]: --> [22:+FDIS: 1,5,0,2,1,0,0,3]
> > Oct 11 15:01:13.48: [ 2407]: --> [2:OK]
> > Oct 11 15:01:13.48: [ 2407]: REMOTE best rate 14400 bit/s
> > Oct 11 15:01:13.48: [ 2407]: REMOTE max page width 1728 pixels in 215 mm
> >
> > Oct 11 15:01:13.48: [ 2407]: REMOTE max unlimited page length
> > Oct 11 15:01:13.48: [ 2407]: REMOTE best vres 7.7 line/mm
> > Oct 11 15:01:13.48: [ 2407]: REMOTE best format 2-D MR
> > Oct 11 15:01:13.48: [ 2407]: REMOTE best 10 ms/scanline
> > Oct 11 15:01:13.48: [ 2407]: USE 14400 bit/s
> > Oct 11 15:01:13.48: [ 2407]: USE 10 ms/scanline
> > Oct 11 15:01:13.48: [ 2407]: <-- [5:ATH0\r] <-------??
> > Oct 11 15:01:13.73: [ 2407]: --> [9:+FHNG: 20]
> > Oct 11 15:01:13.73: [ 2407]: REMOTE HANGUP: Unspecified Transmit Phase B
> > error (code 20)
> > Oct 11 15:01:14.32: [ 2407]: --> [2:OK]
> > Oct 11 15:01:14.32: [ 2407]: SESSION END
> >
> > Below is another log when i use the server directly to send a fax out.
> >
> > Oct 11 13:31:46.05: [ 1966]: SESSION BEGIN 00000013 654155570926
> > Oct 11 13:31:46.05: [ 1966]: HylaFAX (tm) Version 4.1
> > Oct 11 13:31:46.05: [ 1966]: SEND FAX: JOB 11 DEST 5570926 COMMID 00000013
> > Oct 11 13:31:46.05: [ 1966]: DEVICE '/dev/ttyS0'
> > Oct 11 13:31:46.05: [ 1966]: DELAY 75 ms
> > Oct 11 13:31:46.13: [ 1966]: DELAY 2600 ms
> > Oct 11 13:31:48.73: [ 1966]: <-- [4:ATZ\r]
> > Oct 11 13:31:48.84: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.84: [ 1966]: <-- [5:ATE0\r]
> > Oct 11 13:31:48.85: [ 1966]: --> [4:ATE0]
> > Oct 11 13:31:48.85: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.85: [ 1966]: <-- [5:ATV1\r]
> > Oct 11 13:31:48.86: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.86: [ 1966]: <-- [5:ATQ0\r]
> > Oct 11 13:31:48.87: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.87: [ 1966]: <-- [7:ATS0=0\r]
> > Oct 11 13:31:48.88: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.88: [ 1966]: <-- [7:ATS8=2\r]
> > Oct 11 13:31:48.89: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.89: [ 1966]: <-- [8:ATS7=60\r]
> > Oct 11 13:31:48.90: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.90: [ 1966]: <-- [6:AT&K4\r]
> > Oct 11 13:31:48.91: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.91: [ 1966]: <-- [6:AT&D3\r]
> > Oct 11 13:31:48.92: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.92: [ 1966]: <-- [6:AT&C1\r]
> > Oct 11 13:31:48.93: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.93: [ 1966]: <-- [12:AT+FCLASS=2\r]
> > Oct 11 13:31:48.94: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.94: [ 1966]: <-- [10:AT+FTBC=0\r]
> > Oct 11 13:31:48.95: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.95: [ 1966]: <-- [10:AT+FBOR=0\r]
> > Oct 11 13:31:48.96: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.96: [ 1966]: <-- [13:AT+FPHCTO=30\r]
> > Oct 11 13:31:48.97: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.97: [ 1966]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> > Oct 11 13:31:48.98: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.98: [ 1966]: <-- [7:ATL2M1\r]
> > Oct 11 13:31:48.99: [ 1966]: --> [2:OK]
> > Oct 11 13:31:48.99: [ 1966]: <-- [12:AT+FCLASS=2\r]
> > Oct 11 13:31:49.10: [ 1966]: --> [2:OK]
> > Oct 11 13:31:49.10: [ 1966]: <-- [10:AT+FTBC=0\r]
> > Oct 11 13:31:49.21: [ 1966]: --> [2:OK]
> > Oct 11 13:31:49.21: [ 1966]: <-- [10:AT+FBOR=0\r]
> > Oct 11 13:31:49.32: [ 1966]: --> [2:OK]
> > Oct 11 13:31:49.32: [ 1966]: <-- [13:AT+FPHCTO=30\r]
> > Oct 11 13:31:49.43: [ 1966]: --> [2:OK]
> > Oct 11 13:31:49.43: [ 1966]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> > Oct 11 13:31:49.54: [ 1966]: --> [2:OK]
> > Oct 11 13:31:49.54: [ 1966]: <-- [23:AT+FLID="NothingSetup"\r]
> > Oct 11 13:31:49.65: [ 1966]: --> [2:OK]
> > Oct 11 13:31:49.65: [ 1966]: DIAL 5570926
> > Oct 11 13:31:49.65: [ 1966]: <-- [12:ATDT5570926\r]
> > Oct 11 13:32:00.39: [ 1966]: --> [5:+FCON]
> > Oct 11 13:32:03.43: [ 1966]: --> [29:+FCSI: " 5570926"]
> > Oct 11 13:32:03.43: [ 1966]: REMOTE CSI "5570926"
> > Oct 11 13:32:03.88: [ 1966]: --> [22:+FDIS: 1,5,0,2,1,0,0,3]
> > Oct 11 13:32:03.99: [ 1966]: --> [2:OK]
> > Oct 11 13:32:03.99: [ 1966]: REMOTE best rate 14400 bit/s
> > Oct 11 13:32:03.99: [ 1966]: REMOTE max page width 1728 pixels in 215 mm
> >
> > Oct 11 13:32:03.99: [ 1966]: REMOTE max unlimited page length
> > Oct 11 13:32:03.99: [ 1966]: REMOTE best vres 7.7 line/mm
> > Oct 11 13:32:03.99: [ 1966]: REMOTE best format 2-D MR
> > Oct 11 13:32:03.99: [ 1966]: REMOTE best 10 ms/scanline
> > Oct 11 13:32:03.99: [ 1966]: USE 14400 bit/s
> > Oct 11 13:32:03.99: [ 1966]: USE 10 ms/scanline
> > Oct 11 13:32:03.99: [ 1966]: SEND file "docq/doc4.ps;30"
> > Oct 11 13:32:03.99: [ 1966]: USE page width 1728 pixels in 215 mm
> > Oct 11 13:32:03.99: [ 1966]: USE unlimited page length
> > Oct 11 13:32:03.99: [ 1966]: USE 3.85 line/mm
> > Oct 11 13:32:03.99: [ 1966]: USE 1-D MR
> > Oct 11 13:32:03.99: [ 1966]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,3\r]
> > Oct 11 13:32:04.11: [ 1966]: --> [2:OK]
> > Oct 11 13:32:04.11: [ 1966]: <-- [7:AT+FDT\r]
> > Oct 11 13:32:12.03: [ 1966]: --> [22:+FDCS: 0,5,0,2,0,0,0,3]
> > Oct 11 13:32:12.03: [ 1966]: --> [7:CONNECT]
> > Oct 11 13:32:12.03: [ 1966]: SEND wait for XON
> > Oct 11 13:32:12.03: [ 1966]: --> [1: ]
> > Oct 11 13:32:12.03: [ 1966]: SEND begin page
> > Oct 11 13:32:12.03: [ 1966]: <-- data [1031]
> > Oct 11 13:32:12.03: [ 1966]: <-- data [737]
> > Oct 11 13:32:12.03: [ 1966]: SENT 1758 bytes of data
> > Oct 11 13:32:12.03: [ 1966]: <-- data [2]
> > Oct 11 13:32:12.50: [ 1966]: SEND end page
> > Oct 11 13:32:14.28: [ 1966]: --> [2:OK]
> > Oct 11 13:32:14.28: [ 1966]: SEND send EOP (no more pages or documents)
> > Oct 11 13:32:14.28: [ 1966]: <-- [9:AT+FET=2\r]
> > Oct 11 13:32:17.02: [ 1966]: --> [8:+FPTS: 1]
> > Oct 11 13:32:18.65: [ 1966]: --> [8:+FHNG: 0]
> > Oct 11 13:32:18.65: [ 1966]: REMOTE HANGUP: Normal and proper end of connection (code 0)
> > Oct 11 13:32:18.65: [ 1966]: SEND recv MCF (message confirmation)
> > Oct 11 13:32:18.65: [ 1966]: SEND FAX (00000013): FROM me@192.168.0.117
> > TO 5570926 (page 1 of 1 sent in 0:15)
> > Oct 11 13:32:18.65: [ 1966]: SEND FAX (00000013): FROM me@192.168.0.117
> > TO 5570926 (docq/doc4.ps;30 sent in 0:15)
> > Oct 11 13:32:18.65: [ 1966]: <-- [5:ATH0\r]
> > Oct 11 13:32:19.25: [ 1966]: --> [2:OK]
> > Oct 11 13:32:19.25: [ 1966]: SESSION END
> >
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> 
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null