[hylafax-users] Problem with USR 56K

["Antonio Gabelli" <antonio.gabelli@libero.it>]

I've some problem with a modem USR 56K. When I send a fax faxstat -s tell me
in status field:
RSPREC error/got DCN.
WHFC report the same error but .... faxes are sent and received with an
error.
My linux is REDHAT 7.1 with Hylafax 4.1-1

HELP ME!
Thanks a lot

Antonio Gabelli
antonio.gabelli@libero.it

My  /var/log/messages
****************************************************************************
*************************************************************
ott  3 14:04:03 linux FaxSend[3775]: HylaFAX (tm) Version 4.1
ott  3 14:04:03 linux FaxSend[3775]: SEND FAX: JOB 11 DEST 0521981690 COMMID
00000027
ott  3 14:04:03 linux FaxSend[3775]: DEVICE '/dev/ttyS0'
ott  3 14:04:38 linux FaxSend[3775]: SEND: Communication failure during
Phase B/C; Giving up after 3 attempts to send same pa
ott  3 14:04:38 linux FaxQueuer[972]: JOB 11 (active dest +39521981690 pri
125 tts 0:00 killtime 2:54:27): CMD DONE: exit sta
ott  3 14:04:38 linux FaxQueuer[972]: JOB 11 (done dest +39521981690 pri 125
tts 0:00 killtime 2:54:27): SEND DONE: 0:45
Oct  3 14:04:56s 56K FAXxGetty[1030]: MODEM set DTR OFF
Oct  3 14:04:56 linux FaxGetty[1030]: MODEM set DTR ON
Oct  3 14:04:59 linux FaxGetty[1030]: MODEM set baud rate: 38400 baud, input
flow RTS/CTS, output flow RTS/CTS
Oct  3 14:04:59 linux FaxGetty[1030]: MODEM flush i/o
Oct  3 14:04:59 linux FaxGetty[1030]: <-- [4:ATZ\r]
Oct  3 14:04:59 linux FaxGetty[1030]: --> [2:OK]
Oct  3 14:04:59 linux FaxGetty[1030]: <-- [5:ATE0\r]
Oct  3 14:04:59 linux FaxGetty[1030]: --> [4:ATE0]
Oct  3 14:04:59IOS verFaxGetty[1030]: --> [2:OK]
Oct  3 14:04:59ng kswaFaxGetty[1030]: <-- [5:ATV1\r]
Oct  3 14:04:5956 UnixFaxGetty[1030]: --> [2:OK]
Oct  3 14:04:59 queuedFaxGetty[1030]: <-- [7:ATQ0X4\r]
Oct  3 14:04:59K driveFaxGetty[1030]: --> [2:OK]
Oct  3 14:04:59m MultiFaxGetty[1030]: <-- [7:ATS0=0\r]
Oct  3 14:05:00ssumingFaxGetty[1030]: --> [2:OK]
Oct  5 14:05:003: IDE FaxGetty[1030]: <-- [7:ATS8=2\r]
Oct  5 14:05:00ardcodeFaxGetty[1030]: --> [2:OK]
Oct  5 14:05:003: chipFaxGetty[1030]: <-- [8:ATS7=60\r]
Oct  5 14:05:003: not suxGetty[1030]: --> [2:OK]
Oct  3614:05:00e0: BM-suxGetty[1030]: <-- [12:AT&H1&I0&R2\r]
Oct  3614:05:00e1: BM-FaxGetty[1030]: --> [2:OK]
Oct  3614:05:00UANTUM FaxGetty[1030]: <-- [11:ATS13=1&D2\r]
Oct  3614:05:00ssumingFaxGetty[1030]: --> [2:OK]
Oct8:4714:05:00REATIVEFaxGetty[1030]: <-- [6:AT&C1\r]
Oct8:4714:05:00t 0x1f0FaxGetty[1030]: --> [2:OK]
Oct8:5714:05:00t 0x170FaxGetty[1030]: <-- [12:AT+FCLASS=?\r]
Oct8:5814:05:000066251FaxGetty[1030]: --> [7:0,1,2.0]
Oct8:5814:05:00ion cheFaxGetty[1030]: --> [2:OK]
Oct8:5814:05:00hda1 hdFaxGetty[1030]: MODEM Supports "Data"
Oce8:5814:05:00 drive(FaxGetty[1030]: MODEM Supports "Class 1"
Oct9:0014:05:00is a poFaxGetty[1030]: MODEM Supports "Class 2.0"
Oct  3 14:05:00 linux FaxGetty[1030]: <-- [14:AT+FCLASS=2.0\r]
Oct  3 14:05:01 linux FaxGetty[1030]: --> [2:OK]
Oct  3 14:05:01 linux FaxGetty[1030]: <-- [8:AT+FMI?\r]
Oct  3 14:05:01 linux FaxGetty[1030]: --> [21:U.S. Robotics 56K FAX]
Oct  3 14:05:01 linux FaxGetty[1030]: --> [2:OK]
Oct  3 14:05:01 linux FaxGetty[1030]: MODEM: Mfr U.S. Robotics 56K FAX
Oct  3 14:05:01 linux FaxGetty[1030]: <-- [8:AT+FMM?\r]
Oct  3 14:05:01 linux FaxGetty[1030]: --> [2:OK]
Oct  3 14:05:01 linux FaxGetty[1030]: <-- [8:AT+FMR?\r]
Oct  3 14:05:01 linux FaxGetty[1030]: --> [2:OK]
Oct  3 14:05:01 linux FaxGetty[1030]: <-- [9:AT+FCC=?\r]
Oct  3 14:05:02 linux FaxGetty[1030]: -->
[35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)]
Oct  3 14:05:02 linux FaxGetty[1030]: --> [2:OK]
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 3.85 line/mm
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 7.7 line/mm
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 2400 bit/s
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 4800 bit/s
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 7200 bit/s
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 9600 bit/s
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 12000 bit/s
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 14400 bit/s
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports page width 1728 pixels
in 215 mm
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports page width 2048 pixels
in 255 mm
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports page width 2432 pixels
in 303 mm
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports A4 page length (297 mm)
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports B4 page length (364 mm)
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports unlimited page length
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 1-D MR
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 0 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 5 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 10 ms, 5 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 10 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 20 ms, 10 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 20 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 40 ms, 20 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports 40 ms/scanline
Oct  3 14:05:02 linux FaxGetty[1030]: MODEM Supports no copy quality
checking
****************************************************************************
*************************************************


..... and fax log
****************************************************************************
*************************************************
ott 03 14:00:16.28: [ 3621]: SESSION BEGIN 00000025 39521981690
ott 03 14:00:16.28: [ 3621]: MODEM set DTR OFF
ott 03 14:00:16.36: [ 3621]: MODEM set DTR ON
ott 03 14:00:18.96: [ 3621]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
ott 03 14:00:18.96: [ 3621]: MODEM flush i/o
ott 03 14:00:18.96: [ 3621]: <-- [4:ATZ\r]
ott 03 14:00:19.09: [ 3621]: --> [2:OK]
ott 03 14:00:19.09: [ 3621]: <-- [5:ATE0\r]
ott 03 14:00:19.22: [ 3621]: --> [4:ATE0]
ott 03 14:00:19.22: [ 3621]: --> [2:OK]
ott 03 14:00:19.22: [ 3621]: <-- [5:ATV1\r]
ott 03 14:00:19.35: [ 3621]: --> [2:OK]
ott 03 14:00:19.35: [ 3621]: <-- [7:ATQ0X4\r]
ott 03 14:00:19.48: [ 3621]: --> [2:OK]
ott 03 14:00:19.48: [ 3621]: <-- [7:ATS0=0\r]
ott 03 14:00:19.61: [ 3621]: --> [2:OK]
ott 03 14:00:19.61: [ 3621]: <-- [7:ATS8=2\r]
ott 03 14:00:19.74: [ 3621]: --> [2:OK]
ott 03 14:00:19.74: [ 3621]: <-- [8:ATS7=60\r]
ott 03 14:00:19.87: [ 3621]: --> [2:OK]
ott 03 14:00:19.87: [ 3621]: <-- [12:AT&H1&I0&R2\r]
ott 03 14:00:20.01: [ 3621]: --> [2:OK]
ott 03 14:00:20.01: [ 3621]: <-- [11:ATS13=1&D2\r]
ott 03 14:00:20.15: [ 3621]: --> [2:OK]
ott 03 14:00:20.15: [ 3621]: <-- [6:AT&C1\r]
ott 03 14:00:20.28: [ 3621]: --> [2:OK]
ott 03 14:00:20.28: [ 3621]: <-- [14:AT+FCLASS=2.0\r]
ott 03 14:00:20.42: [ 3621]: --> [2:OK]
ott 03 14:00:20.42: [ 3621]: <-- [9:AT+FLO=2\r]
ott 03 14:00:20.56: [ 3621]: --> [2:OK]
ott 03 14:00:20.56: [ 3621]: <-- [9:AT+FPP=0\r]
ott 03 14:00:20.70: [ 3621]: --> [2:OK]
ott 03 14:00:20.70: [ 3621]: <-- [9:AT+FBO=0\r]
ott 03 14:00:20.84: [ 3621]: --> [2:OK]
ott 03 14:00:20.84: [ 3621]: <-- [10:AT+FCT=30\r]
ott 03 14:00:20.98: [ 3621]: --> [2:OK]
ott 03 14:00:20.98: [ 3621]: <-- [15:AT+FNR=1,1,1,0\r]
ott 03 14:00:21.12: [ 3621]: --> [2:OK]
ott 03 14:00:21.12: [ 3621]: <-- [9:AT+FIE=0\r]
ott 03 14:00:21.26: [ 3621]: --> [2:OK]
ott 03 14:00:21.26: [ 3621]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
ott 03 14:00:21.40: [ 3621]: --> [2:OK]
ott 03 14:00:21.40: [ 3621]: <-- [7:ATL2M1\r]
ott 03 14:00:21.53: [ 3621]: --> [2:OK]
ott 03 14:00:21.53: [ 3621]: MODEM input buffering enabled
ott 03 14:00:21.53: [ 3621]: <-- [14:AT+FCLASS=2.0\r]
ott 03 14:00:21.77: [ 3621]: --> [2:OK]
ott 03 14:00:21.77: [ 3621]: <-- [9:AT+FLO=2\r]
ott 03 14:00:22.01: [ 3621]: --> [2:OK]
ott 03 14:00:22.01: [ 3621]: <-- [9:AT+FPP=0\r]
ott 03 14:00:20.70: [ 3621]: --> [2:OK]
ott 03 14:00:20.70: [ 3621]: <-- [9:AT+FBO=0\r]
ott 03 14:00:20.84: [ 3621]: --> [2:OK]
ott 03 14:00:20.84: [ 3621]: <-- [10:AT+FCT=30\r]
ott 03 14:00:20.98: [ 3621]: --> [2:OK]
ott 03 14:00:20.98: [ 3621]: <-- [15:AT+FNR=1,1,1,0\r]
ott 03 14:00:21.12: [ 3621]: --> [2:OK]
ott 03 14:00:21.12: [ 3621]: <-- [9:AT+FIE=0\r]
ott 03 14:00:21.26: [ 3621]: --> [2:OK]
ott 03 14:00:21.26: [ 3621]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
ott 03 14:00:21.40: [ 3621]: --> [2:OK]
ott 03 14:00:21.40: [ 3621]: <-- [7:ATL2M1\r]
ott 03 14:00:21.53: [ 3621]: --> [2:OK]
ott 03 14:00:21.53: [ 3621]: MODEM input buffering enabled
ott 03 14:00:21.53: [ 3621]: <-- [14:AT+FCLASS=2.0\r]
ott 03 14:00:21.77: [ 3621]: --> [2:OK]
ott 03 14:00:21.77: [ 3621]: <-- [9:AT+FLO=2\r]
ott 03 14:00:22.01: [ 3621]: --> [2:OK]
ott 03 14:00:22.01: [ 3621]: <-- [9:AT+FPP=0\r]
ott 03 14:00:22.25: [ 3621]: --> [2:OK]
ott 03 14:00:22.25: [ 3621]: <-- [9:AT+FBO=0\r]
ott 03 14:00:22.49: [ 3621]: --> [2:OK]
ott 03 14:00:22.49: [ 3621]: <-- [10:AT+FCT=30\r]
ott 03 14:00:22.73: [ 3621]: --> [2:OK]
ott 03 14:00:22.73: [ 3621]: <-- [15:AT+FNR=1,1,1,0\r]
ott 03 14:00:22.97: [ 3621]: --> [2:OK]
ott 03 14:00:22.97: [ 3621]: <-- [9:AT+FIE=0\r]
ott 03 14:00:23.21: [ 3621]: --> [2:OK]
ott 03 14:00:23.21: [ 3621]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
ott 03 14:00:23.45: [ 3621]: --> [2:OK]
ott 03 14:00:23.45: [ 3621]: <-- [30:AT+FLI="xxxxxxxxxxxxxxxxxxxx"\r]
ott 03 14:00:23.69: [ 3621]: --> [2:OK]
ott 03 14:00:23.69: [ 3621]: <-- [15:ATDT1111111111\r]
ott 03 14:00:39.95: [ 3621]: --> [4:+FCO]
ott 03 14:00:43.40: [ 3621]: --> [27:+FCI:"         11111111111"]
ott 03 14:00:43.40: [ 3621]: --> [20:+FIS:1,3,0,2,1,0,0,2]
ott 03 14:00:43.40: [ 3621]: --> [2:OK]
ott 03 14:00:43.40: [ 3621]: <-- [23:AT+FIS=1,3,0,2,0,0,0,2\r]
ott 03 14:00:43.64: [ 3621]: --> [2:OK]
ott 03 14:00:43.64: [ 3621]: <-- [7:AT+FDT\r]
ott 03 14:00:43.91: [ 3621]: --> [20:+FCS:1,3,0,2,0,0,0,2]
ott 03 14:00:49.64: [ 3621]: --> [7:CONNECT]
ott 03 14:00:49.64: [ 3621]: <-- data [1028]
ott 03 14:00:49.64: [ 3621]: <-- data [1027]
ott 03 14:00:49.64: [ 3621]: <-- data [384]
ott 03 14:00:49.64: [ 3621]: <-- data [2]
ott 03 14:00:58.64: [ 3621]: --> [7:+FHS:51]
ott 03 14:00:58.64: [ 3621]: <-- [5:ATH0\r]
ott 03 14:00:58.76: [ 3621]: --> [2:OK]
ott 03 14:00:58.76: [ 3621]: MODEM set DTR OFF
ott 03 14:00:58.76: [ 3621]: SESSION END
****************************************************************************
****************************



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null