 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] HylaFax Suse 6.4 + Eicon Diehl BRI2.0 + Errors
- To: "'hylafax-users@hylafax.org'" <hylafax-users@hylafax.org>
- Subject: [hylafax-users] HylaFax Suse 6.4 + Eicon Diehl BRI2.0 + Errors
- From: Koch Nils <N.Koch@hees-buerowelt.de>
- Date: Wed, 26 Sep 2001 12:48:55 +0200
Hello, I have running a SuSE 6.4 with HylaFax and a PCI-ISDN-Card "Eicon Diehl BRI2.0", which emulates the modem. Now, I can't send a fax, because the fax won't leave the sendq. The error-messages runs "Busy signal detected", but the cables are ok and the line isn't busy. I've checked this out. Apart from that, in the /var/log/messages are error-message that say that the command [AT+FAP="\r] is an unknown token. I have add some parts from the /var/log/messages to this mail. It would be very nice if someone can help me! Please answer to: n.koch@hees-buerowelt.de Thank you! Greetings, Nils Koch <<fax_error.txt>>
Your facsimile job to 02714881200 failed because:
Busy signal detected; too many attempts to dial
---- Transcript of session follows ----
Sep 26 11:55:26.00: [24867]: SESSION BEGIN 00000068 492714881200
Sep 26 11:55:26.00: [24867]: SEND FAX: JOB 14 DEST 02714881200 COMMID 00000068
Sep 26 11:55:26.00: [24867]: MODEM set DTR OFF
Sep 26 11:55:26.00: [24867]: DELAY 2600 ms
Sep 26 11:55:28.60: [24867]: MODEM set DTR ON
Sep 26 11:55:28.60: [24867]: MODEM set baud rate: 9600 baud, input flow RTS/CTS, output flow RTS/CTS
Sep 26 11:55:28.60: [24867]: MODEM flush i/o
Sep 26 11:55:28.60: [24867]: <-- [15:ATE0V1Q0S0=0H0\r]
Sep 26 11:55:28.61: [24867]: --> [2:OK]
Sep 26 11:55:28.61: [24867]: <-- [12:ATS8=2S7=60\r]
Sep 26 11:55:28.62: [24867]: --> [2:OK]
Sep 26 11:55:28.62: [24867]: <-- [12:AT+FCLASS=2\r]
Sep 26 11:55:28.63: [24867]: --> [2:OK]
Sep 26 11:55:28.63: [24867]: <-- [10:AT+FTBC=0\r]
Sep 26 11:55:28.64: [24867]: --> [2:OK]
Sep 26 11:55:28.64: [24867]: <-- [10:AT+FBOR=0\r]
Sep 26 11:55:28.65: [24867]: --> [2:OK]
Sep 26 11:55:28.65: [24867]: <-- [13:AT+FPHCTO=30\r]
Sep 26 11:55:28.66: [24867]: --> [2:OK]
Sep 26 11:55:28.66: [24867]: <-- [24:AT+FDCC=1,5,2,2,3,0,0,0\r]
Sep 26 11:55:28.67: [24867]: --> [2:OK]
Sep 26 11:55:28.67: [24867]: <-- [5:ATM0\r]
Sep 26 11:55:28.68: [24867]: --> [5:ERROR]
Sep 26 11:55:28.68: [24867]: MODEM Command error
Sep 26 11:55:28.68: [24867]: MODEM input buffering enabled
Sep 26 11:55:28.68: [24867]: <-- [12:AT+FCLASS=2\r]
Sep 26 11:55:28.79: [24867]: --> [2:OK]
Sep 26 11:55:28.79: [24867]: <-- [10:AT+FTBC=0\r]
Sep 26 11:55:28.90: [24867]: --> [2:OK]
Sep 26 11:55:28.90: [24867]: <-- [10:AT+FBOR=0\r]
Sep 26 11:55:29.01: [24867]: --> [2:OK]
Sep 26 11:55:29.01: [24867]: <-- [13:AT+FPHCTO=30\r]
Sep 26 11:55:29.12: [24867]: --> [2:OK]
Sep 26 11:55:29.12: [24867]: <-- [24:AT+FDCC=1,5,2,2,3,0,0,0\r]
Sep 26 11:55:29.23: [24867]: --> [2:OK]
Sep 26 11:55:29.23: [24867]: <-- [31:AT+FLID="Gebr. Kemmerich GmbH"\r]
Sep 26 11:55:29.34: [24867]: --> [2:OK]
Sep 26 11:55:29.34: [24867]: DIAL 02714881200
Sep 26 11:55:29.34: [24867]: <-- [17:ATDT02714881200@\r]
Sep 26 11:55:30.57: [24867]: --> [4:BUSY]
Sep 26 11:55:30.57: [24867]: SEND FAILED: Busy signal detected
Sep 26 11:55:30.57: [24867]: SEND FAILED: Busy signal detected; too many attempts to dial
Sep 26 11:55:30.57: [24867]: <-- [5:ATH0\r]
Sep 26 11:55:30.68: [24867]: --> [2:OK]
Sep 26 11:55:30.68: [24867]: MODEM set DTR OFF
Sep 26 11:55:30.68: [24867]: SESSION END
---- Unsent job status ----
-------------------------------------------------------------------------------------------
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: MODEM flush i/o
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [15:ATE0V1Q0S0=0H0\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [12:ATS8=2S7=60\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [12:AT+FCLASS=?\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [5:0,2,8]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [12:AT+FCLASS=2\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [9:AT+FMFR?\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [10:isdn4linux]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [9:AT+FMDL?\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [10:isdn4linux]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [9:AT+FREV?\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [8:Rev: 1.4]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [10:AT+FDCC=?\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [45:(0,1),(0-5),(0-2),(0-2),(0-3),(0-2),(0),(0-7)]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [9:AT+FCQ=?\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [5:0,1,2]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [9:AT+FAP=?\r]
Sep 26 12:17:02 cpq2500 kernel: isdn_tty: unknown token=>AT+FAP=?<
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [5:ERROR]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [10:AT+FSPL=?\r]
Sep 26 12:17:02 cpq2500 kernel: isdn_tty: unknown token=>AT+FSPL=?<
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [5:ERROR]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [12:AT+FCLASS=2\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [10:AT+FTBC=0\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [10:AT+FBOR=0\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [13:AT+FPHCTO=30\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [24:AT+FDCC=1,5,2,2,3,0,0,0\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: MODEM ISDN4LINUX isdn4linux/Rev: 1.4
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [5:ATM0\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [5:ERROR]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: MODEM Command error
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [10:AT+FREL=1\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [9:AT+FCR=1\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: <-- [31:AT+FLID="Gebr. Kemmerich GmbH"\r]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: --> [2:OK]
Sep 26 12:17:02 cpq2500 FaxGetty[24323]: MODEM input buffering disabled
-------------------------------------------------------------------------------------------
Sep 26 12:16:30 cpq2500 kernel: isdn_tty: unknown token=>AT+FAP=?<
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [5:ERROR]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [10:AT+FSPL=?\r]
Sep 26 12:16:30 cpq2500 kernel: isdn_tty: unknown token=>AT+FSPL=?<
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [5:ERROR]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [12:AT+FCLASS=2\r]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [2:OK]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [10:AT+FTBC=0\r]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [2:OK]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [10:AT+FBOR=0\r]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [2:OK]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [13:AT+FPHCTO=30\r]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [2:OK]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [24:AT+FDCC=1,5,2,2,3,0,0,0\r]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [2:OK]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: MODEM ISDN4LINUX isdn4linux/Rev: 1.4
Sep 26 12:16:30 cpq2500 FaxSend[25018]: <-- [5:ATM0\r]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: --> [5:ERROR]
Sep 26 12:16:30 cpq2500 FaxSend[25018]: MODEM Command error
Sep 26 12:16:30 cpq2500 FaxSend[25018]: MODEM input buffering disabled
Sep 26 12:16:31 cpq2500 FaxSend[25018]: SEND FAX: JOB 17 DEST +492714881280 COMMID 00000073
Sep 26 12:16:35 cpq2500 kernel: isdn: HiSax0,ch0 cause: E0201
Sep 26 12:16:35 cpq2500 FaxSend[25018]: SEND FAILED: Busy signal detected
Sep 26 12:16:35 cpq2500 FaxSend[25018]: info/492714881280: open: Permission denied
Sep 26 12:16:35 cpq2500 FaxQueuer[24892]: JOB 17 (active dest +492714881280 pri 123 tts 0:00 killtime 2:46:06): CMD DONE: exit status 0
Sep 26 12:16:35 cpq2500 FaxQueuer[24892]: JOB 17 (sleeping dest +492714881280 pri 122 tts 0:00 killtime 2:46:06): SEND INCOMPLETE: requeue for 3:00; Busy signal detected
Sep 26 12:16:36 cpq2500 kernel: TLAN: Giving autonegotiation more time.
Sep 26 12:16:52 cpq2500 last message repeated 2 times
Sep 26 12:16:59 cpq2500 FaxGetty[24323]: MODEM set DTR OFF
Sep 26 12:16:59 cpq2500 FaxGetty[24323]: DELAY 2600 ms
Sep 26 12:17:00 cpq2500 kernel: TLAN: Giving autonegotiation more time.
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: MODEM set DTR ON
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: MODEM set baud rate: 9600 baud, input flow RTS/CTS, output flow RTS/CTS
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: MODEM flush i/o
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: <-- [15:ATE0V1Q0S0=0H0\r]
Sep 26 12:17:01 cpq2500 FaxGetty[24323]: --> [2:OK]
- Prev by Date: [hylafax-users] AS400
- Next by Date: [hylafax-users] Problem with ZyXEL Elite 2864ID
- Previous by thread: Re: [hylafax-users] AS400
- Next by thread: [hylafax-users] Problem with ZyXEL Elite 2864ID
- Index(es):
Project hosted by iFAX Solutions