![]() |
Hello Hylafax-Mailinglist! I'd like to set up a Modem from my friend to use Hylafax. The Modem is called Vobis VoiceFax and is some years old. Although the Modem is quite old, the Service is up and running. Recieving Faxes makes no Problems. I am using WHFC as the client. But when i am sending more than one Page (right after the first page), i always get the code 43 Error message as show below. In the Faq i can find somthing about disabling the 2D Compression, but i don't think that it is used here (how do i find out?). The Distribution used is SuSE Linux 7.1. grep of Log: Sep 17 22:44:31.42: [ 1392]: SEND file "docq/doc5.ps;00" Sep 17 22:44:31.42: [ 1392]: USE page width 1728 pixels in 215 mm Sep 17 22:44:31.42: [ 1392]: USE unlimited page length Sep 17 22:44:31.42: [ 1392]: USE 3.85 line/mm Sep 17 22:44:31.42: [ 1392]: USE 1-D MR Sep 17 22:44:31.42: [ 1392]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r] Sep 17 22:44:31.55: [ 1392]: --> [2:OK] Sep 17 22:44:31.55: [ 1392]: <-- [7:AT+FDT\r] Sep 17 22:44:37.18: [ 1392]: --> [20:+FCS:0,3,0,2,0,0,0,5] Sep 17 22:44:37.48: [ 1392]: --> [7:CONNECT] Sep 17 22:44:37.48: [ 1392]: SEND begin page Sep 17 22:45:17.41: [ 1392]: SENT 77786 bytes of data Sep 17 22:45:17.41: [ 1392]: SEND 1D RTC Sep 17 22:45:17.41: [ 1392]: SEND end page Sep 17 22:45:17.41: [ 1392]: SEND send MPS (more pages, same document) Sep 17 22:46:08.59: [ 1392]: --> [7:+FHS:43] Sep 17 22:46:08.59: [ 1392]: REMOTE HANGUP: DTE to DCE data underflow (code 43) Sep 17 22:46:08.59: [ 1392]: <-- [5:ATH0\r] Sep 17 22:46:09.80: [ 1392]: --> [2:OK] How do i fix the Problem - or at least where does it come from? By the way: can you please tell me additionally, where i can get informations about setting up an answer-machine too? (maybe some Howtos, because the Advanced Server Configuration- Chapter doesn't tell me the Details i am searching for...) - do i really need vgetty+sendfax? Kind Regards, Mit freundlichen Gr��en, Daniel P�tzold