HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] One server, multiple modem pools?



At 10:30 AM 9/4/01 +0930, Adam Fox wrote:
>   Hi  all,   I've been assigned  the task by my employer to setup a faxing
>server that can send faxes from both  Windows and UNIX. I've gone with
>hylafax and all has been going beautifully  until now!   What we want to do
> is have only the one hylafax server in Melbourne and modem pools in
>Melbourne,  Adelaide and Fremantle. We have a frame relay network that
>links all three  locations, and we have Stallion TermServers at each
>location. I am using the  svr_tty daemon supplied by Stallion Technologies
>to communicate with the modems  using pseudo tty devices, and this works
>fine. I can communicate with a modem  here in Adelaide from the Melbourne
>server like the modem is connected to the  modem server.   So when a fax is
> destined for a Melbourne number, we would like it to use the Melbourne
>modem  pool. When a fax is destined for an Adelaide number, we would like
>it to use the  Adelaide modem pool, and ditto for Freo. These faxes will be
>generated by the  system, so we could in theory explicitly say "send this
>fax to the freo modem  pool".   If anyone has any  ideas on how to do this,
>please let me know as I am stuck! :)

(please, no HTML mail)

Look into ModemGroup and DestControls in the hylafax-config manpage and
also review the DestControls manpage.  You can use DestControls to specify
that Melbourne-bound faxes utilize a particular ModemGroup using the
"Modem" option in DestControls.

Note that you will need 4.1-release (or 4.1rc2) in order to utilize this
function.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions