Re: [hylafax-users] "REMOTE best format 2-D MR" and "USE 1-D MR"

[SCHNEIDER Laurent <SCHNEILA@eps.e-i.com>]

Title: Re: [hylafax-users] "REMOTE best format 2-D MR" and "USE 1-D MR"

I forgot to describe my config :
hylafax 4.1beta3-1 on linux redhat 7.1
two Multitech MT2834ZDXF

-----Message d'origine-----
De : SCHNEIDER Laurent
Envoyé : jeudi 30 août 2001 10:40
À : 'hylafax-users@hylafax.org'
Objet : [hylafax-users] "REMOTE best format 2-D MR" and "USE 1-D MR"

Hello,
I've got a fax failure because "REMOTE HANGUP: No response to MPS repeated 3 times".
This session log shows "REMOTE best format 2-D MR" and "USE 1-D MR". Why hylafax in this case doesn't use 2-D MR ?
Is this the explaination of the fax failure "retrain negative" ?
aoû 29 16:57:48.01: [ 1401]: SESSION BEGIN 00000176 33141087809
aoû 29 16:57:48.01: [ 1401]: SEND FAX: JOB 132 DEST 0141087809 COMMID 00000176
aoû 29 16:57:48.01: [ 1401]: DELAY 2600 ms
aoû 29 16:57:50.61: [ 1401]: <-- [4:ATZ\r]
aoû 29 16:57:51.13: [ 1401]: --> [3:ATZ]
aoû 29 16:57:51.13: [ 1401]: --> [2:OK]
aoû 29 16:57:51.13: [ 1401]: <-- [15:ATE0V1Q0S0=0H0\r]
aoû 29 16:57:51.30: [ 1401]: --> [14:ATE0V1Q0S0=0H0]
aoû 29 16:57:51.30: [ 1401]: --> [2:OK]
aoû 29 16:57:51.30: [ 1401]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
aoû 29 16:57:51.47: [ 1401]: --> [2:OK]
aoû 29 16:57:51.47: [ 1401]: <-- [12:AT+FCLASS=2\r]
aoû 29 16:57:51.63: [ 1401]: --> [2:OK]
aoû 29 16:57:51.63: [ 1401]: <-- [10:AT+FTBC=0\r]
aoû 29 16:57:51.79: [ 1401]: --> [2:OK]
aoû 29 16:57:51.79: [ 1401]: <-- [10:AT+FBOR=0\r]
aoû 29 16:57:51.95: [ 1401]: --> [2:OK]
aoû 29 16:57:51.95: [ 1401]: <-- [13:AT+FPHCTO=30\r]
aoû 29 16:57:52.11: [ 1401]: --> [2:OK]
aoû 29 16:57:52.11: [ 1401]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
aoû 29 16:57:52.28: [ 1401]: --> [2:OK]
aoû 29 16:57:52.28: [ 1401]: <-- [5:ATM0\r]
aoû 29 16:57:52.44: [ 1401]: --> [2:OK]
aoû 29 16:57:52.44: [ 1401]: <-- [12:AT+FCLASS=2\r]
aoû 29 16:57:52.71: [ 1401]: --> [2:OK]
aoû 29 16:57:52.71: [ 1401]: <-- [10:AT+FTBC=0\r]
aoû 29 16:57:52.97: [ 1401]: --> [2:OK]
aoû 29 16:57:52.97: [ 1401]: <-- [10:AT+FBOR=0\r]
aoû 29 16:57:53.23: [ 1401]: --> [2:OK]
aoû 29 16:57:53.23: [ 1401]: <-- [13:AT+FPHCTO=30\r]
aoû 29 16:57:53.49: [ 1401]: --> [2:OK]
aoû 29 16:57:53.49: [ 1401]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
aoû 29 16:57:53.76: [ 1401]: --> [2:OK]
aoû 29 16:57:53.76: [ 1401]: <-- [14:AT+FLID="EPS"\r]
aoû 29 16:57:54.02: [ 1401]: --> [2:OK]
aoû 29 16:57:54.02: [ 1401]: DIAL 0141087809
aoû 29 16:57:54.02: [ 1401]: <-- [17:ATDT00141087809@\r]
aoû 29 16:58:21.77: [ 1401]: --> [5:+FCON]
aoû 29 16:58:24.39: [ 1401]: --> [48:+FNSF:BC 53 01 70 12 00 01 41 01 54 00 00 00 01 ]
aoû 29 16:58:24.39: [ 1401]: REMOTE NSF "BC 53 01 70 12 00 01 41 01 54 00 00 00 01"
aoû 29 16:58:24.39: [ 1401]: NSF remote fax equipment: unknown
aoû 29 16:58:24.39: [ 1401]: --> [28:+FCSI:"            00000000"]
aoû 29 16:58:24.39: [ 1401]: REMOTE CSI "00000000"
aoû 29 16:58:24.39: [ 1401]: --> [21:+FDIS:1,3,0,2,1,0,0,0]
aoû 29 16:58:24.39: [ 1401]: --> [2:OK]
aoû 29 16:58:24.39: [ 1401]: REMOTE best rate 9600 bit/s
aoû 29 16:58:24.39: [ 1401]: REMOTE max page width 1728 pixels in 215 mm
aoû 29 16:58:24.39: [ 1401]: REMOTE max unlimited page length
aoû 29 16:58:24.39: [ 1401]: REMOTE best vres 7.7 line/mm
aoû 29 16:58:24.39: [ 1401]: REMOTE best format 2-D MR
aoû 29 16:58:24.39: [ 1401]: REMOTE best 0 ms/scanline
aoû 29 16:58:24.39: [ 1401]: USE 9600 bit/s
aoû 29 16:58:24.39: [ 1401]: USE 0 ms/scanline
aoû 29 16:58:24.39: [ 1401]: SEND file "docq/doc123.ps;00"
aoû 29 16:58:24.39: [ 1401]: USE page width 1728 pixels in 215 mm
aoû 29 16:58:24.39: [ 1401]: USE unlimited page length
aoû 29 16:58:24.39: [ 1401]: USE 3.85 line/mm
aoû 29 16:58:24.39: [ 1401]: USE 1-D MR
aoû 29 16:58:24.39: [ 1401]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,0\r]
aoû 29 16:58:24.66: [ 1401]: --> [2:OK]
aoû 29 16:58:24.66: [ 1401]: <-- [7:AT+FDT\r]
aoû 29 16:58:32.06: [ 1401]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
aoû 29 16:58:32.06: [ 1401]: --> [7:CONNECT]
aoû 29 16:58:32.06: [ 1401]: SEND wait for XON
aoû 29 16:58:32.06: [ 1401]: --> [1:^Q]
aoû 29 16:58:32.06: [ 1401]: SEND begin page
aoû 29 16:58:32.06: [ 1401]: <-- data [1024]
aoû 29 16:58:32.06: [ 1401]: <-- data [1025]
aoû 29 16:58:32.06: [ 1401]: <-- data [1027]
aoû 29 16:58:32.06: [ 1401]: <-- data [1028]
aoû 29 16:58:32.06: [ 1401]: <-- data [1029]
aoû 29 16:58:33.06: [ 1401]: <-- data [1024]
aoû 29 16:58:33.06: [ 1401]: <-- data [1025]
aoû 29 16:58:33.06: [ 1401]: <-- data [1025]
aoû 29 16:58:34.85: [ 1401]: <-- data [1024]
aoû 29 16:58:35.64: [ 1401]: <-- data [1028]
aoû 29 16:58:36.39: [ 1401]: <-- data [1026]
aoû 29 16:58:37.87: [ 1401]: <-- data [1024]
aoû 29 16:58:38.63: [ 1401]: <-- data [1026]
aoû 29 16:58:39.42: [ 1401]: <-- data [1026]
aoû 29 16:58:40.23: [ 1401]: <-- data [1028]
aoû 29 16:58:41.04: [ 1401]: <-- data [1027]
aoû 29 16:58:41.75: [ 1401]: <-- data [1026]
aoû 29 16:58:42.50: [ 1401]: <-- data [1027]
aoû 29 16:58:43.98: [ 1401]: <-- data [1025]
aoû 29 16:58:44.90: [ 1401]: <-- data [1025]
aoû 29 16:58:45.61: [ 1401]: <-- data [1025]
aoû 29 16:58:46.38: [ 1401]: <-- data [1024]
aoû 29 16:58:47.16: [ 1401]: <-- data [1029]
aoû 29 16:58:47.96: [ 1401]: <-- data [1028]
aoû 29 16:58:48.80: [ 1401]: <-- data [1025]
aoû 29 16:58:49.45: [ 1401]: <-- data [1024]
aoû 29 16:58:50.84: [ 1401]: <-- data [1024]
aoû 29 16:58:51.53: [ 1401]: <-- data [1027]
aoû 29 16:58:52.32: [ 1401]: <-- data [1025]
aoû 29 16:58:52.92: [ 1401]: <-- data [1027]
aoû 29 16:58:54.37: [ 1401]: <-- data [1026]
aoû 29 16:58:55.18: [ 1401]: <-- data [1025]
aoû 29 16:58:55.90: [ 1401]: <-- data [1024]
aoû 29 16:58:56.69: [ 1401]: <-- data [1027]
aoû 29 16:58:57.49: [ 1401]: <-- data [1025]
aoû 29 16:58:58.29: [ 1401]: <-- data [1027]
aoû 29 16:58:59.05: [ 1401]: <-- data [1028]
aoû 29 16:58:59.83: [ 1401]: <-- data [651]
aoû 29 16:59:00.70: [ 1401]: SENT 38536 bytes of data
aoû 29 16:59:00.70: [ 1401]: <-- data [2]
aoû 29 16:59:00.70: [ 1401]: SEND end page
aoû 29 16:59:05.07: [ 1401]: --> [76:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q]

aoû 29 16:59:05.07: [ 1401]: --> [2:OK]
aoû 29 16:59:05.07: [ 1401]: SEND send MPS (more pages, same document)
aoû 29 16:59:05.07: [ 1401]: <-- [9:AT+FET=0\r]
aoû 29 16:59:10.09: [ 1401]: --> [7:+FPTS:2]
aoû 29 16:59:10.09: [ 1401]: --> [2:OK]
aoû 29 16:59:10.09: [ 1401]: SEND recv RTN (retrain negative)
aoû 29 16:59:10.09: [ 1401]: <-- [24:AT+FDIS=0,2,0,2,0,0,0,0\r]
aoû 29 16:59:10.36: [ 1401]: --> [2:OK]
aoû 29 16:59:10.36: [ 1401]: <-- [7:AT+FDT\r]
aoû 29 16:59:17.81: [ 1401]: --> [21:+FDCS:0,2,0,2,0,0,0,0]
aoû 29 16:59:17.81: [ 1401]: --> [7:CONNECT]
aoû 29 16:59:17.81: [ 1401]: SEND wait for XON
aoû 29 16:59:17.81: [ 1401]: --> [1:^Q]
aoû 29 16:59:17.81: [ 1401]: SEND begin page
aoû 29 16:59:17.81: [ 1401]: <-- data [1024]
aoû 29 16:59:17.81: [ 1401]: <-- data [1025]
aoû 29 16:59:17.81: [ 1401]: <-- data [1027]
aoû 29 16:59:17.81: [ 1401]: <-- data [1028]
aoû 29 16:59:17.81: [ 1401]: <-- data [1029]
aoû 29 16:59:18.81: [ 1401]: <-- data [1024]
aoû 29 16:59:18.81: [ 1401]: <-- data [1025]
aoû 29 16:59:18.81: [ 1401]: <-- data [1025]
aoû 29 16:59:20.76: [ 1401]: <-- data [1024]
aoû 29 16:59:21.60: [ 1401]: <-- data [1028]
aoû 29 16:59:23.52: [ 1401]: <-- data [1026]
aoû 29 16:59:24.37: [ 1401]: <-- data [1024]
aoû 29 16:59:25.23: [ 1401]: <-- data [1026]
aoû 29 16:59:26.86: [ 1401]: <-- data [1026]
aoû 29 16:59:27.77: [ 1401]: <-- data [1028]
aoû 29 16:59:28.70: [ 1401]: <-- data [1027]
aoû 29 16:59:30.54: [ 1401]: <-- data [1026]
aoû 29 16:59:31.47: [ 1401]: <-- data [1027]
aoû 29 16:59:32.49: [ 1401]: <-- data [1025]
aoû 29 16:59:33.22: [ 1401]: <-- data [1025]
aoû 29 16:59:35.11: [ 1401]: <-- data [1025]
aoû 29 16:59:36.01: [ 1401]: <-- data [1024]
aoû 29 16:59:36.93: [ 1401]: <-- data [1029]
aoû 29 16:59:37.87: [ 1401]: <-- data [1028]
aoû 29 16:59:39.74: [ 1401]: <-- data [1025]
aoû 29 16:59:40.62: [ 1401]: <-- data [1024]
aoû 29 16:59:41.55: [ 1401]: <-- data [1024]
aoû 29 16:59:42.44: [ 1401]: <-- data [1027]
aoû 29 16:59:44.49: [ 1401]: <-- data [1025]
aoû 29 16:59:45.47: [ 1401]: <-- data [1027]
aoû 29 16:59:46.30: [ 1401]: <-- data [1026]
aoû 29 16:59:47.17: [ 1401]: <-- data [1025]
aoû 29 16:59:48.83: [ 1401]: <-- data [1024]
aoû 29 16:59:49.66: [ 1401]: <-- data [1027]
aoû 29 16:59:50.50: [ 1401]: <-- data [1025]
aoû 29 16:59:52.41: [ 1401]: <-- data [1027]
aoû 29 16:59:53.29: [ 1401]: <-- data [1028]
aoû 29 16:59:54.16: [ 1401]: <-- data [651]
aoû 29 16:59:55.10: [ 1401]: SENT 38536 bytes of data
aoû 29 16:59:55.10: [ 1401]: <-- data [2]
aoû 29 16:59:55.10: [ 1401]: SEND end page
aoû 29 17:00:01.02: [ 1401]: --> [86:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q]

aoû 29 17:00:01.02: [ 1401]: --> [2:OK]
aoû 29 17:00:01.02: [ 1401]: SEND send MPS (more pages, same document)
aoû 29 17:00:01.02: [ 1401]: <-- [9:AT+FET=0\r]
aoû 29 17:00:18.00: [ 1401]: --> [8:+FHNG:52]
aoû 29 17:00:18.00: [ 1401]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
aoû 29 17:00:18.00: [ 1401]: SEND: No response to MPS repeated 3 times; Giving up after 3 attempts to send same page "docq/doc123.ps;00", dirnum 0

aoû 29 17:00:18.00: [ 1401]: <-- [5:ATH0\r]
aoû 29 17:00:18.65: [ 1401]: --> [2:OK]
aoû 29 17:00:18.65: [ 1401]: SESSION END