[hylafax-users] can't receive faxed

[Jay Ungab <jungab@dairy-farm.com.ph>]

Dear All,

	I have server-clients(pc-server) hylafax server running in
Turbolinux. It can send fax using the sendfax client installed in a server
to a certain fax machines. I can also send a fax using client TurboLinux
machine only (pc-client) thru server-clients(pc-server)   to a certain
dedicated fax. Here's the flow and work fine as discuss above.

e.g.
	pc-server(server-client) ---> fax machine
		(sendfax -n -d 1234567 /etc/files)	
	pc-client -----> pc-server(server-client) ----> Fax machine
(dedicated)
		(sendfax -n -h pc-server -d 1234567 /etc/files2) 
	
	However, if im in fax machine(dedicated) or using the pc-client
hylafax and try to send to the pc-server(server-client) "I can't receive
fax" services. I got error below in my logs. And also below my config file
for /dev/ttyS0. Can anyone point me where I miss something in my
configurations. Thanks!


----------------snoop for error
log----------------------------------------------
Aug 30 09:42:03.19: [ 6729]: SESSION BEGIN 00000050 6325279524
Aug 30 09:42:03.19: [ 6729]: <-- [4:ATA\r]
Aug 30 09:42:11.72: [ 6729]: --> [5:+FCON]
Aug 30 09:42:11.72: [ 6729]: ANSWER: FAX CONNECTION
Aug 30 09:42:11.72: [ 6729]: STATE CHANGE: ANSWERING -> RECEIVING
Aug 30 09:42:11.72: [ 6729]: MODEM input buffering enabled
Aug 30 09:42:11.72: [ 6729]: RECV FAX: begin
Aug 30 09:42:13.35: [ 6729]: --> [29:+FTSI: "             5256193"]
Aug 30 09:42:13.35: [ 6729]: REMOTE TSI "5256193"
Aug 30 09:42:13.67: [ 6729]: --> [22:+FDCS: 1,5,0,2,0,0,0,3]
Aug 30 09:42:13.67: [ 6729]: REMOTE wants 14400 bit/s
Aug 30 09:42:13.67: [ 6729]: REMOTE wants page width 1728 pixels in 215 mm
Aug 30 09:42:13.67: [ 6729]: REMOTE wants unlimited page length
Aug 30 09:42:13.67: [ 6729]: REMOTE wants 7.7 line/mm
Aug 30 09:42:13.67: [ 6729]: REMOTE wants 1-D MR
Aug 30 09:42:13.79: [ 6729]: --> [2:OK]
Aug 30 09:42:13.79: [ 6729]: REJECT TSI "5256193"
Aug 30 09:42:13.79: [ 6729]: RECV FAX (00000050): recvq/fax00007.tif from
5256193, route to <unspecified>, 0 pa
ges in 0:02
Aug 30 09:42:13.79: [ 6729]: RECV FAX: Permission denied (unacceptable
client TSI)
Aug 30 09:42:13.79: [ 6729]: <-- [6:AT+FK\r]
Aug 30 09:42:15.44: [ 6729]: --> [8:+FHNG: 2]
Aug 30 09:42:15.44: [ 6729]: REMOTE HANGUP: Call aborted,  from +FK or <CAN>
(code 2)
Aug 30 09:42:16.87: [ 6729]: --> [2:OK]
Aug 30 09:42:16.87: [ 6729]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif"
"ttyS0" "00000050" ""
Aug 30 09:42:16.94: [ 6729]: RECV FAX: end
Aug 30 09:42:16.94: [ 6729]: SESSION END
-----------------end--------------------------------------------------------
-------------

------------------snoop for
config.ttyS0--------------------------------------------------

# $Id: class2,v 1.23 1996/06/24 02:58:32 sam Rel $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#

#
# Generic Class 2 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode:            63
AreaCode:               2
FAXNumber:              5279524
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "The Dairy Farm Philippines-OSSC"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
QualifyTSI:             etc/tsi
NoCarrierRetrys:        5
PercentGoodLines:       0
MaxConsecutiveBadLines: 0
MaxRecvPages:           25
MaxDials:               3
MaxTries:               3
UUCPLockTimeout:        15
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use this to supply a hint
ModemRate:              19200
ModemFlowControl:       rtscts
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for silence

#
# Other possible configuration stuff.  The default strings are
# shown below.  Only those that are different from the defaults
# need to be included in the configuration file.
#
ModemResetCmds:         ""              # stuff to do when modem is reset
ModemAnswerCmd:         ATA             # use this to answer phone
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemNoAutoAnswerCmd:   ATS0=0          # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd:      "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemEchoOffCmd:        ATE0            # disable command echo
ModemVerboseResultsCmd: ATV1            # enable verbose command results
ModemResultCodesCmd:    ATQ0X3          # enable result codes
ModemOnHookCmd:         ATH0            # place phone on hook (hangup)
ModemSoftResetCmd:      ATZ             # do soft reset of modem
ModemWaitTimeCmd:       ATS7=60         # wait 60 seconds for carrier
ModemCommaPauseTimeCmd: ATS8=2          # comma pause time is 2 seconds
ModemRecvFillOrder:     LSB2MSB         # bit order of received facsimile
ModemSendFillOrder:     LSB2MSB         # bit order modem expects for
transmit
#
# Configuration parameters for Class 2 modems.
#
Class2Cmd:              AT+FCLASS=2     # command to enter class 2
Class2BORCmd:           AT+FBOR=0       # bit order for phase B/C/D (direct)
Class2RELCmd:           AT+FREL=1       # byte-align EOL codes on recv
Class2CQCmd:            ""              # commands to enable copy quality
proc.
Class2AbortCmd:         AT+FK           # abort session command
Class2CQQueryCmd:       AT+FCQ=?        # query for copy quality
capabilities
Class2DCCQueryCmd:      AT+FDCC=?       # query for modem capabilities
Class2TBCCmd:           AT+FTBC=0       # setup stream mode
Class2CRCmd:            AT+FCR=1        # enable capability to receive
Class2PHCTOCmd:         AT+FPHCTO=30    # set phase C timeout parameter
Class2BUGCmd:           AT+FBUG=0       # enable HDLC frame tracing
Class2LIDCmd:           AT+FLID         # set local identifier command
Class2DCCCmd:           AT+FDCC         # set modem capabilities command
Class2DISCmd:           AT+FDIS         # set session parameters command
Class2DDISCmd:          ""              # disable pre-dial DIS command hack
Class2CIGCmd:           AT+FCIG         # set polling identifier command
Class2PTSCmd:           AT+FPTS         # set post-page status command
Class2SPLCmd:           AT+FSPL         # set polling indicator command
#
# If Class2RecvDataTrigger is not set, then it is set to DC1
#
Class2RecvDataTrigger:  ""              # character sent to modem to start
recv
Class2XmitWaitForXON:   yes             # if true, wait for XON before send

----------------------------------------end---------------------------------
----------




Regards

Jay Ungab
Dairy Farm Off-Shore Support Center
2/F, Bank of Philippine Islands Bldg., Muralla St.
Intramuros, Manila, Philippines
Telephone: +63 (2) 525 6152 Extension 229
Fax: +63 (2) 5279622
Email: jungab@dairy-farm.com.ph



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null