Re: [hylafax-users] I cannot receive faxes

["Jay Langford" <jay@staffforce.com.au>]

No Idea whatso ever, I have had this happen to me on occasion, I changed to
class 1 and found hylafax started to operate with fax machines that it
didn't used to when in class 2. I would try re-configuring it as a class 1
and see how you go.

JAY


----- Original Message -----
From: Alfons Meisl <MusiCOMP@t-online.de>
To: <hylafax-users@hylafax.org>
Sent: Wednesday, August 29, 2001 3:59 PM
Subject: [hylafax-users] I cannot receive faxes


> hello,
>
> I have trouble with receiving faxes.
> here is my logfile.
> I configurated my modem as a class2 modem.
>
> I always get a phase b error.
> does anybody know, why this problem happens ?
>
>
> Aug 28 18:55:24.11: [  537]: SESSION BEGIN 00001644 498924568
> Aug 28 18:55:24.11: [  537]: <-- [4:ATA\r]
> Aug 28 18:55:26.03: [  537]: --> [3:FAX]
> Aug 28 18:55:26.03: [  537]: MODEM set baud rate: 9600 baud (flow control
> unchanged)
> Aug 28 18:55:26.03: [  537]: MODEM set baud rate: 9600 baud, input flow
> XON/XOFF, output flow XON/XOFF
> Aug 28 18:55:26.03: [  537]: ANSWER: FAX CONNECTION
> Aug 28 18:55:26.03: [  537]: MODEM input buffering enabled
> Aug 28 18:55:26.03: [  537]: RECV FAX: begin
> Aug 28 18:58:26.03: [  537]: MODEM TIMEOUT: reading line from modem
> Aug 28 18:58:26.03: [  537]: REMOTE HANGUP: Unspecified Receive Phase B
> error (code 70)
> Aug 28 18:58:26.03: [  537]: RECV FAX: Unspecified Receive Phase B error
> Aug 28 18:58:26.03: [  537]: RECV FAX: end
> Aug 28 18:58:26.03: [  537]: SESSION END
>
>
>
>
> Thanks Alfons
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null