HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Hylafax Problems while sending facsimiles with a US-Robotics Courier (receiving works fine)



Hi,

I hope somebody can help me with my Problem or give me a hint.

The configuration of the usr-courier was made via faxaddmodem, it was
recognised and I modified the config.ttyS0 to dial over a PBX with modifying
the FaxClass Command to: atx3+fclass=2.0.

When a fax is coming in the modem listens and receives the fax.
But when I send a fax I have a strange problem:

The USR starts dialing, connects with the other machine, they talk to each
and handle out the specifications but after that goes no data but comes a
hang up and the fax hasn't been sent.
Then, when the line is down, faxgetty sends a mail via bin/notify, that the
fax has been delivered!!


Can anybody help me?

Axel


Here comes the logfile during the connection:

Aug 15 13:40:07.65: [ 5255]: SESSION BEGIN 00000016 49975354155
Aug 15 13:40:07.65: [ 5255]: SEND FAX: JOB 2 DEST 0975354155 COMMID 00000016
Aug 15 13:40:07.65: [ 5255]: DELAY 2600 ms
Aug 15 13:40:10.24: [ 5255]: <-- [21:AT&Fx3E0V1Q0X4S0=0H0\r]
Aug 15 13:40:10.43: [ 5255]: --> [20:AT&Fx3E0V1Q0X4S0=0H0]
Aug 15 13:40:10.43: [ 5255]: --> [2:OK]
Aug 15 13:40:10.43: [ 5255]: <-- [29:ATS8=2S7=60&H1&R2S13=1&D2&C1\r]
Aug 15 13:40:10.61: [ 5255]: --> [2:OK]
Aug 15 13:40:10.61: [ 5255]: <-- [16:atx3+fclass=2.0\r]
Aug 15 13:40:10.66: [ 5255]: --> [2:OK]
Aug 15 13:40:10.66: [ 5255]: <-- [9:AT+FLO=2\r]
Aug 15 13:40:10.71: [ 5255]: --> [2:OK]
Aug 15 13:40:10.71: [ 5255]: <-- [9:AT+FPP=0\r]
Aug 15 13:40:10.76: [ 5255]: --> [2:OK]
Aug 15 13:40:10.76: [ 5255]: <-- [9:AT+FBO=0\r]
Aug 15 13:40:10.81: [ 5255]: --> [2:OK]
Aug 15 13:40:10.81: [ 5255]: <-- [10:AT+FCT=30\r]
Aug 15 13:40:10.86: [ 5255]: --> [2:OK]
Aug 15 13:40:10.86: [ 5255]: <-- [15:AT+FNR=1,1,1,0\r]
Aug 15 13:40:10.91: [ 5255]: --> [2:OK]
Aug 15 13:40:10.91: [ 5255]: <-- [9:AT+FIE=0\r]
Aug 15 13:40:10.96: [ 5255]: --> [2:OK]
Aug 15 13:40:10.96: [ 5255]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 15 13:40:11.02: [ 5255]: --> [2:OK]
Aug 15 13:40:11.02: [ 5255]: <-- [5:ATM1\r]
Aug 15 13:40:11.19: [ 5255]: --> [2:OK]
Aug 15 13:40:11.19: [ 5255]: <-- [16:atx3+fclass=2.0\r]
Aug 15 13:40:11.34: [ 5255]: --> [2:OK]
Aug 15 13:40:11.34: [ 5255]: <-- [9:AT+FLO=2\r]
Aug 15 13:40:11.49: [ 5255]: --> [2:OK]
Aug 15 13:40:11.49: [ 5255]: <-- [9:AT+FPP=0\r]
Aug 15 13:40:11.64: [ 5255]: --> [2:OK]
Aug 15 13:40:11.64: [ 5255]: <-- [9:AT+FBO=0\r]
Aug 15 13:40:11.79: [ 5255]: --> [2:OK]
Aug 15 13:40:11.79: [ 5255]: <-- [10:AT+FCT=30\r]
Aug 15 13:40:11.94: [ 5255]: --> [2:OK]
Aug 15 13:40:11.94: [ 5255]: <-- [15:AT+FNR=1,1,1,0\r]
Aug 15 13:40:12.09: [ 5255]: --> [2:OK]
Aug 15 13:40:12.09: [ 5255]: <-- [9:AT+FIE=0\r]
Aug 15 13:40:12.24: [ 5255]: --> [2:OK]
Aug 15 13:40:12.24: [ 5255]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Aug 15 13:40:12.40: [ 5255]: --> [2:OK]
Aug 15 13:40:12.40: [ 5255]: <-- [24:AT+FLI="Test"\r]
Aug 15 13:40:12.56: [ 5255]: --> [2:OK]
Aug 15 13:40:12.57: [ 5255]: DIAL 0975354155
Aug 15 13:40:12.57: [ 5255]: <-- [15:ATDT0975354155\r]
Aug 15 13:40:31.51: [ 5255]: --> [4:+FCO]
Aug 15 13:40:34.28: [ 5255]: --> [27:+FCI:" +49 231 97535455"]
Aug 15 13:40:34.28: [ 5255]: REMOTE CSI "+49 231 97535455"
Aug 15 13:40:34.58: [ 5255]: --> [20:+FIS:1,3,0,2,1,0,0,5]
Aug 15 13:40:34.58: [ 5255]: --> [2:OK]
Aug 15 13:40:34.58: [ 5255]: REMOTE best rate 9600 bit/s
Aug 15 13:40:34.58: [ 5255]: REMOTE max page width 1728 pixels in 215 mm
Aug 15 13:40:34.58: [ 5255]: REMOTE max unlimited page length
Aug 15 13:40:34.58: [ 5255]: REMOTE best vres 7.7 line/mm
Aug 15 13:40:34.58: [ 5255]: REMOTE best format 2-D MR
Aug 15 13:40:34.58: [ 5255]: REMOTE best 20 ms/scanline
Aug 15 13:40:34.58: [ 5255]: USE 9600 bit/s
Aug 15 13:40:34.58: [ 5255]: USE 20 ms/scanline
Aug 15 13:40:34.58: [ 5255]: <-- [5:ATH0\r]
Aug 15 13:40:34.98: [ 5255]: --> [2:OK]
Aug 15 13:40:34.98: [ 5255]: SESSION END

#######################
The Modem Type:
#######################
ati7
USRobotics Courier V.Everything Configuration Profile...

Product type           Germany External
Options                HST,V32bis,Terbo,VFC,V34+,x2
Fax Options            Class 1,Class 2.0
Clock Freq             20.16Mhz
Flash ROM              512k
Ram                    64k

Supervisor date        04/23/97
DSP date               04/21/97

Supervisor rev         049-7.1.8
DSP rev                2.2.5

Serial Number          21LRD1H8EESO

########################
The config.ttyS0:
########################
# $Id: usr-2.0,v 1.2 1999/01/04 10:19:07 robert Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
# Configuration for using the Class 2.0 command interface
# with a USR v.34 Courier or Sporster modem.
#
# RTS/CTS flow control is used default.
#
#
CountryCode:            49
AreaCode:               231
FAXNumber:              +49.231.975324.55
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0666
LogFileMode:            0666
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          high
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Test"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           25
#
ModemType:              Class2.0        # use class 2.0 interface
ModemRate:              19200           # DCE-DTE communication rate
ModemFlowControl:       rtscts          # Hardware Flow Control
ModemHardFlowCmd:       AT&H1&R2     # setup modem for hardware flow control
#ModemSoftFlowCmd:       AT&H2&I2      # setup modem for software flow
control
ModemSetupDTRCmd:       ATS13=1&D2      # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)
ModemResultCodesCmd:    ATQ0X4          # enable extended result codes
ModemResetCmds:         AT&Fx3          # stuff to do when modem is reset
Class2Cmd:              atx3+fclass=2.0 #
ModemDialCmd:           ATDT%s       #T for tone dialing, @ for silence
ModemSetupAACmd:        AT+FAA=1
ModemSetVolumeCmd:      "ATM0 ATM1 ATM1 ATM1 ATM1"
Class2BUGCmd:           AT+FBU=0
Class2CQQueryCmd:       !(0),(0)        # override modem response
Class2NRCmd:    AT+FNR=1,1,1,0




Project hosted by iFAX Solutions