HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Can not initialize modem
hi lee,
Okey! I focus the problem are more in modem and serial port rather
than my configuration files I attached in my previous mail. Any idea how can
I changes the setting of modem delays to 2600ms? I'm trying to changes a
different modem to isolate once I can't get through of it. Thanks for your
advise guys!
Regards
Jay Ungab
Dairy Farm Off-Shore Support Center
2/F, Bank of Philippine Islands Bldg., Muralla St.
Intramuros, Manila, Philippines
Telephone: +63 (2) 525 6152 Extension 229
Fax: +63 (2) 5279622
Email: jungab@dairy-farm.com.ph
-----Original Message-----
From: Lee Howard [mailto:faxguy@deanox.com]
Sent: Thursday, August 02, 2001 11:23 PM
To: lists@proissl.de; hylafax-users@hylafax.org
Subject: Re: [hylafax-users] Can not initialize modem
At 02:13 PM 8/2/01 +0200, Bernd Proissl wrote:
>
>> Aug 2 11:55:45 puppy FaxGetty[25167]: MODEM <Timeout>
>> Aug 2 11:55:45 puppy FaxGetty[25167]: MODEM set DTR OFF
>> Aug 2 11:55:45 puppy FaxGetty[25167]: DELAY 75 ms
>> Aug 2 11:55:45 puppy FaxGetty[25167]: MODEM set DTR ON
>> Aug 2 11:55:45 puppy FaxGetty[25167]: DELAY 2600 ms
>> Aug 2 11:55:48 puppy FaxGetty[25167]: MODEM set baud rate: 19200 baud,
>> input flow XON/XOFF,
>
>it makes me wonder why it does not delay for 2600 ms?
>Is this related with the serial port problems you suspect Lee?
Yes. I'd guess that the serial port was locked up at this time, so any
serial communication will abort immediately. I don't think his modem or
the serial port is faulty, only at this time it was locked up because of
all the previous trouble.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null