Re: [hylafax-users] Can not initialize modem

[Jay Ungab <jungab@dairy-farm.com.ph>]

Hi Lee,

	Here's my logs...thanks

Aug  2 11:55:45 puppy FaxGetty[25167]: MODEM TIMEOUT: reading line from
modem
Aug  2 11:55:45 puppy FaxGetty[25167]: MODEM <Timeout>
Aug  2 11:55:45 puppy FaxGetty[25167]: MODEM set DTR OFF
Aug  2 11:55:45 puppy FaxGetty[25167]: DELAY 75 ms
Aug  2 11:55:45 puppy FaxGetty[25167]: MODEM set DTR ON
Aug  2 11:55:45 puppy FaxGetty[25167]: DELAY 2600 ms
Aug  2 11:55:48 puppy FaxGetty[25167]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF,
Aug  2 11:55:48 puppy FaxGetty[25167]: MODEM flush i/o
Aug  2 11:55:48 puppy FaxGetty[25167]: <-- [4:ATZ\r]
Aug  2 11:56:18 puppy FaxGetty[25167]: MODEM TIMEOUT: reading line from
modem
Aug  2 11:56:18 puppy FaxGetty[25167]: MODEM <Timeout>
Aug  2 11:56:18 puppy FaxGetty[25167]: MODEM set DTR OFF
Aug  2 11:56:18 puppy FaxGetty[25167]: /dev/ttyS0: Can not initialize modem.
Aug  2 11:56:18 puppy FaxGetty[25167]: STATE CHANGE: BASE -> MODEMWAIT
(timeout 30)
Aug  2 11:56:48 puppy FaxGetty[25167]: MODEM set DTR OFF
Aug  2 11:56:48 puppy FaxGetty[25167]: DELAY 75 ms
Aug  2 11:56:48 puppy FaxGetty[25167]: MODEM set DTR ON
Aug  2 11:56:48 puppy FaxGetty[25167]: DELAY 2600 ms
Aug  2 11:56:50 puppy FaxGetty[25167]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF,
Aug  2 11:56:50 puppy FaxGetty[25167]: MODEM flush i/o
Aug  2 11:56:50 puppy FaxGetty[25167]: <-- [4:ATZ\r]
Aug  2 11:57:20 puppy FaxGetty[25167]: MODEM TIMEOUT: reading line from
modem
Aug  2 11:57:20 puppy FaxGetty[25167]: MODEM <Timeout>
Aug  2 11:57:20 puppy FaxGetty[25167]: MODEM set DTR OFF
Aug  2 11:57:20 puppy FaxGetty[25167]: DELAY 75 ms
Aug  2 11:57:20 puppy FaxGetty[25167]: MODEM set DTR ON
Aug  2 11:57:20 puppy FaxGetty[25167]: DELAY 2600 ms
Aug  2 11:57:23 puppy FaxGetty[25167]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF,
Aug  2 11:57:23 puppy FaxGetty[25167]: MODEM flush i/o
Aug  2 11:57:23 puppy FaxGetty[25167]: <-- [4:ATZ\r]
Aug  2 11:57:53 puppy FaxGetty[25167]: MODEM TIMEOUT: reading line from
modem
Aug  2 11:57:53 puppy FaxGetty[25167]: MODEM <Timeout>
Aug  2 11:57:53 puppy FaxGetty[25167]: MODEM set DTR OFF
Aug  2 11:58:23 puppy FaxGetty[25167]: MODEM set DTR OFF
Aug  2 11:58:23 puppy FaxGetty[25167]: DELAY 75 ms
Aug  2 11:58:23 puppy FaxGetty[25167]: MODEM set DTR ON
Aug  2 11:58:23 puppy FaxGetty[25167]: DELAY 2600 ms
Aug  2 11:58:26 puppy FaxGetty[25167]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF,
Aug  2 11:58:26 puppy FaxGetty[25167]: MODEM flush i/o
Aug  2 11:58:26 puppy FaxGetty[25167]: <-- [4:ATZ\r]



Regards

Jay Ungab
Dairy Farm Off-Shore Support Center
2/F, Bank of Philippine Islands Bldg., Muralla St.
Intramuros, Manila, Philippines
Telephone: +63 (2) 525 6152 Extension 229
Fax: +63 (2) 5279622
Email: jungab@dairy-farm.com.ph





-----Original Message-----
From: Lee Howard [mailto:faxguy@deanox.com]
Sent: Thursday, August 02, 2001 11:55 AM
To: Jay Ungab; 'hylafax-users@hylafax.org'
Subject: Re: [hylafax-users] Can not initialize modem


At 11:50 AM 8/2/01 +0800, Jay Ungab wrote:
>
>Hello All,
>
>	I'm new to this stuff of hylafax and having a problem getting my
>modem work using a line serial port in my box TurboLinux 6.0. Base in logs
>the following enrtries I got. Any idea how can I solved this problem?  My
>modem is working
>since I can use it in my dialup. I really appreciate your input. thanks in
>advance.
>
>Aug  2 11:36:12 puppy init: Re-reading inittab
>Aug  2 11:36:18 puppy FaxGetty[25011]: Unable to setup modem on /dev/ttyS0;
>giving up after 2 attempts
>Aug  2 11:36:18 puppy FaxGetty[25011]: CLOSE /dev/ttyS0
>Aug  2 11:36:18 puppy FaxGetty[25107]: OPEN /dev/ttyS0
>Aug  2 11:36:18 puppy FaxQueuer[25104]: MODEM /dev/ttyS0 appears to be
>wedged
>Aug  2 11:36:18 puppy FaxQueuer[25104]: MODEM WEDGED: bin/wedged "ttyS0"
>"/dev/ttyS0"
>Aug  2 11:37:24 puppy FaxGetty[25107]: /dev/ttyS0: Can not initialize
modem.

It did all of that in one second... Hmm... Well, I'd guess that your config
file is wrong, but your tracing level isn't high enough to tell.  Set
ServerTracing to 0xFFF in your config file and restart faxgetty.  Then send
us the log.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null