Re: [hylafax-users] can't hang up

[Denis A Ustimenko <denis@oldham.ru>]

On Mon, 30 Jul 2001, Lee Howard wrote:

> Hmmm... would you mind changing your SessionTracing value to 0xFFF and then
> resend us a new log?

Sorry, my previous posting was with SessionTracing == 11.

denis@ls.oldham.ru# cat /var/spool/hylafax/log/c00000258
éÀÌ 31 11:04:47.10: [25492]: SESSION BEGIN 00000258 73832134
éÀÌ 31 11:04:47.10: [25492]: HylaFAX (tm) Version 4.1
éÀÌ 31 11:04:47.10: [25492]: SEND FAX: JOB 14 DEST 134 COMMID 00000258
éÀÌ 31 11:04:47.10: [25492]: DEVICE '/dev/cua1'
éÀÌ 31 11:04:47.10: [25492]: MODEM set DTR OFF
éÀÌ 31 11:04:47.10: [25492]: DELAY 75 ms
éÀÌ 31 11:04:47.18: [25492]: MODEM set DTR ON
éÀÌ 31 11:04:47.18: [25492]: DELAY 2600 ms
éÀÌ 31 11:04:49.78: [25492]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
éÀÌ 31 11:04:49.78: [25492]: MODEM flush i/o
éÀÌ 31 11:04:49.78: [25492]: DELAY 100 ms
éÀÌ 31 11:04:49.88: [25492]: <-- [4:ATZ\r]
éÀÌ 31 11:04:50.84: [25492]: --> [3:ATZ]
éÀÌ 31 11:04:50.84: [25492]: --> [2:OK]
éÀÌ 31 11:04:50.84: [25492]: DELAY 100 ms
éÀÌ 31 11:04:50.94: [25492]: <-- [5:ATE0\r]
éÀÌ 31 11:04:51.10: [25492]: --> [4:ATE0]
éÀÌ 31 11:04:51.10: [25492]: --> [2:OK]
éÀÌ 31 11:04:51.10: [25492]: DELAY 100 ms
éÀÌ 31 11:04:51.20: [25492]: <-- [5:ATV1\r]
éÀÌ 31 11:04:51.36: [25492]: --> [2:OK]
éÀÌ 31 11:04:51.36: [25492]: DELAY 100 ms
éÀÌ 31 11:04:51.46: [25492]: <-- [7:ATQ0X4\r]
éÀÌ 31 11:04:51.62: [25492]: --> [2:OK]
éÀÌ 31 11:04:51.62: [25492]: DELAY 100 ms
éÀÌ 31 11:04:51.72: [25492]: <-- [7:ATS0=0\r]
éÀÌ 31 11:04:51.89: [25492]: --> [2:OK]
éÀÌ 31 11:04:51.89: [25492]: DELAY 100 ms
éÀÌ 31 11:04:51.99: [25492]: <-- [7:ATS8=2\r]
éÀÌ 31 11:04:52.15: [25492]: --> [2:OK]
éÀÌ 31 11:04:52.15: [25492]: DELAY 100 ms
éÀÌ 31 11:04:52.25: [25492]: <-- [8:ATS7=60\r]
éÀÌ 31 11:04:52.42: [25492]: --> [2:OK]
éÀÌ 31 11:04:52.42: [25492]: DELAY 100 ms
éÀÌ 31 11:04:52.52: [25492]: <-- [12:AT&H1&I0&R2\r]
éÀÌ 31 11:04:52.68: [25492]: --> [2:OK]
éÀÌ 31 11:04:52.68: [25492]: DELAY 100 ms
éÀÌ 31 11:04:52.78: [25492]: <-- [11:ATS13=1&D3\r]
éÀÌ 31 11:04:52.94: [25492]: --> [2:OK]
éÀÌ 31 11:04:52.94: [25492]: DELAY 100 ms
éÀÌ 31 11:04:53.04: [25492]: <-- [6:AT&C1\r]
éÀÌ 31 11:04:53.20: [25492]: --> [2:OK]
éÀÌ 31 11:04:53.20: [25492]: DELAY 100 ms
éÀÌ 31 11:04:53.30: [25492]: <-- [14:AT+FCLASS=2.0\r]
éÀÌ 31 11:04:53.34: [25492]: --> [2:OK]
éÀÌ 31 11:04:53.34: [25492]: DELAY 100 ms
éÀÌ 31 11:04:53.44: [25492]: <-- [9:AT+FLO=2\r]
éÀÌ 31 11:04:53.48: [25492]: --> [2:OK]
éÀÌ 31 11:04:53.48: [25492]: DELAY 100 ms
éÀÌ 31 11:04:53.58: [25492]: <-- [9:AT+FPP=0\r]
éÀÌ 31 11:04:53.62: [25492]: --> [2:OK]
éÀÌ 31 11:04:53.62: [25492]: DELAY 100 ms
éÀÌ 31 11:04:53.72: [25492]: <-- [9:AT+FBO=0\r]
éÀÌ 31 11:04:53.76: [25492]: --> [2:OK]
éÀÌ 31 11:04:53.76: [25492]: DELAY 100 ms
éÀÌ 31 11:04:53.86: [25492]: <-- [10:AT+FCT=30\r]
éÀÌ 31 11:04:53.90: [25492]: --> [2:OK]
éÀÌ 31 11:04:53.90: [25492]: DELAY 100 ms
éÀÌ 31 11:04:54.00: [25492]: <-- [15:AT+FNR=1,1,1,1\r]
éÀÌ 31 11:04:54.04: [25492]: --> [2:OK]
éÀÌ 31 11:04:54.04: [25492]: DELAY 100 ms
éÀÌ 31 11:04:54.14: [25492]: <-- [9:AT+FIE=0\r]
éÀÌ 31 11:04:54.18: [25492]: --> [2:OK]
éÀÌ 31 11:04:54.18: [25492]: DELAY 100 ms
éÀÌ 31 11:04:54.28: [25492]: <-- [9:AT+FBU=0\r]
éÀÌ 31 11:04:54.32: [25492]: --> [2:OK]
éÀÌ 31 11:04:54.32: [25492]: DELAY 100 ms
éÀÌ 31 11:04:54.42: [25492]: <-- [23:AT+FCC=1,5,2,0,0,0,0,0\r]
éÀÌ 31 11:04:54.46: [25492]: --> [2:OK]
éÀÌ 31 11:04:54.46: [25492]: DELAY 100 ms
éÀÌ 31 11:04:54.56: [25492]: <-- [5:ATM0\r]
éÀÌ 31 11:04:54.72: [25492]: --> [2:OK]
éÀÌ 31 11:04:54.72: [25492]: STATE CHANGE: RUNNING -> SENDING
éÀÌ 31 11:04:54.72: [25492]: MODEM input buffering enabled
éÀÌ 31 11:04:54.73: [25492]: DELAY 100 ms
éÀÌ 31 11:04:54.83: [25492]: <-- [14:AT+FCLASS=2.0\r]
éÀÌ 31 11:04:54.97: [25492]: --> [2:OK]
éÀÌ 31 11:04:54.97: [25492]: DELAY 100 ms
éÀÌ 31 11:04:55.07: [25492]: <-- [9:AT+FLO=2\r]
éÀÌ 31 11:04:55.21: [25492]: --> [2:OK]
éÀÌ 31 11:04:55.21: [25492]: DELAY 100 ms
éÀÌ 31 11:04:55.31: [25492]: <-- [9:AT+FPP=0\r]
éÀÌ 31 11:04:55.45: [25492]: --> [2:OK]
éÀÌ 31 11:04:55.45: [25492]: DELAY 100 ms
éÀÌ 31 11:04:55.55: [25492]: <-- [9:AT+FBO=0\r]
éÀÌ 31 11:04:55.69: [25492]: --> [2:OK]
éÀÌ 31 11:04:55.69: [25492]: DELAY 100 ms
éÀÌ 31 11:04:55.79: [25492]: <-- [10:AT+FCT=30\r]
éÀÌ 31 11:04:55.93: [25492]: --> [2:OK]
éÀÌ 31 11:04:55.93: [25492]: DELAY 100 ms
éÀÌ 31 11:04:56.03: [25492]: <-- [15:AT+FNR=1,1,1,1\r]
éÀÌ 31 11:04:56.17: [25492]: --> [2:OK]
éÀÌ 31 11:04:56.17: [25492]: DELAY 100 ms
éÀÌ 31 11:04:56.27: [25492]: <-- [9:AT+FIE=0\r]
éÀÌ 31 11:04:56.41: [25492]: --> [2:OK]
éÀÌ 31 11:04:56.41: [25492]: DELAY 100 ms
éÀÌ 31 11:04:56.51: [25492]: <-- [9:AT+FBU=0\r]
éÀÌ 31 11:04:56.65: [25492]: --> [2:OK]
éÀÌ 31 11:04:56.65: [25492]: DELAY 100 ms
éÀÌ 31 11:04:56.75: [25492]: <-- [23:AT+FCC=1,5,2,0,0,0,0,0\r]
éÀÌ 31 11:04:56.89: [25492]: --> [2:OK]
éÀÌ 31 11:04:56.89: [25492]: DELAY 100 ms
éÀÌ 31 11:04:56.99: [25492]: <-- [16:AT+FLI="oldham"\r]
éÀÌ 31 11:04:57.13: [25492]: --> [2:OK]
éÀÌ 31 11:04:57.14: [25492]: DIAL 134
éÀÌ 31 11:04:57.14: [25492]: DELAY 100 ms
éÀÌ 31 11:04:57.24: [25492]: <-- [8:ATDT134\r]
éÀÌ 31 11:05:09.58: [25492]: --> [4:BUSY]
éÀÌ 31 11:05:09.58: [25492]: SEND FAILED: JOB 14 DEST 134 ERR Busy signal
detected
éÀÌ 31 11:05:09.58: [25492]: DELAY 100 ms
éÀÌ 31 11:05:09.68: [25492]: <-- [5:ATH0\r]
éÀÌ 31 11:05:09.80: [25492]: --> [4:BUSY]
éÀÌ 31 11:05:10.01: [25492]: --> [4:BUSY]
..................................................faxsend killed
éÀÌ 31 11:06:02.15: [25492]: --> [4:BUSY]
éÀÌ 31 11:06:02.37: [25492]: --> [4:BUSY]
éÀÌ 31 11:06:02.48: [25492]: ABORT: job abort requested
éÀÌ 31 11:06:02.48: [25492]: --> [0:]
éÀÌ 31 11:06:02.48: [25492]: MODEM <Empty line>
éÀÌ 31 11:06:02.48: [25492]: MODEM set DTR OFF
éÀÌ 31 11:06:02.48: [25492]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
5)
éÀÌ 31 11:06:02.48: [25492]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null