[hylafax-users] Send Fax Error!!

To: "hylafax-users@hylafax.org" <hylafax-users@hylafax.org>
Subject: [hylafax-users] Send Fax Error!!
From: shiweilu <shiweilu@sohu.com>
Date: Sun, 29 Jul 2001 16:26:55 +0800
Hello everyone:
  I have a problem about multi-user card,I had installed hylafax-4.1beta3 on my linux box(Redhat 6.2) before.I use two modem on my linux box (through ttyS0 and ttyS1),They are work correct.
  Now I want to connect more than two modem so I install a multi-user card on my linux.when I use the card dial in or out it no problem(I test it on Red hat 7.0)and can send AT command to the modem.But when I send fax(through tty61a port on multi-user card ),it can only send half of paper to the fax machine and print out "communication error".But Sending the half of fax document is correct and the ttyS0 port sending the fax is correct.
  
  The manufacturer said:
  "If you just sent and received data from TTY port, it is no difference of TTY port and COM port. If you need to take care the timing (the sequence) for data income and outcome, there are difference for P818 and COM1 port. Because COM1 port use main CPU, so the application S/W can maintain the data sequence. But P818 use local processor, so the application S/W can not maintain the data sequence."

  So I change the setting of flow control I set the modem to software flow control Xon/Xoff( default RTS/CTS),it can't send any fax.

 Here is the fax log ,What is happen??
 
1)send by ttyS0,it is OK:


[root@tang log]# vi c00000035
Jul 28 16:34:42.98: [  899]: SESSION BEGIN 00000035 862265299832
Jul 28 16:34:42.98: [  899]: SEND FAX: JOB 24 DEST 65299832 COMMID 00000035
Jul 28 16:34:42.98: [  899]: DELAY 2600 ms
Jul 28 16:34:45.58: [  899]: <-- [4:ATZ\r]
Jul 28 16:34:45.68: [  899]: --> [2:OK]
Jul 28 16:34:45.68: [  899]: <-- [15:ATE0V1Q0S0=0H0\r]
Jul 28 16:34:45.69: [  899]: --> [14:ATE0V1Q0S0=0H0]
Jul 28 16:34:45.69: [  899]: --> [2:OK]
Jul 28 16:34:45.69: [  899]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Jul 28 16:34:45.71: [  899]: --> [2:OK]
Jul 28 16:34:45.71: [  899]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:34:45.72: [  899]: --> [2:OK]
Jul 28 16:34:45.72: [  899]: <-- [5:ATM0\r]
Jul 28 16:34:45.73: [  899]: --> [2:OK]
Jul 28 16:34:45.73: [  899]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:34:45.84: [  899]: --> [2:OK]
Jul 28 16:34:45.84: [  899]: DIAL 65299832
Jul 28 16:34:45.84: [  899]: <-- [13:ATDT65299832\r]
Jul 28 16:34:55.61: [  899]: --> [7:CONNECT]
Jul 28 16:34:57.49: [  899]: --> [2:OK]
Jul 28 16:34:57.49: [  899]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 00
02 95 80 08 01 49 02 57 49 4E 53 54 41 52 20 49 4E 54 27 4C 20 54 52 03 57"
Jul 28 16:34:42.98: [  899]: SESSION BEGIN 00000035 862265299832
Jul 28 16:34:42.98: [  899]: SEND FAX: JOB 24 DEST 65299832 COMMID 00000035
Jul 28 16:34:42.98: [  899]: DELAY 2600 ms
Jul 28 16:34:45.58: [  899]: <-- [4:ATZ\r]
Jul 28 16:34:45.68: [  899]: --> [2:OK]
Jul 28 16:34:45.68: [  899]: <-- [15:ATE0V1Q0S0=0H0\r]
Jul 28 16:34:45.69: [  899]: --> [14:ATE0V1Q0S0=0H0]
Jul 28 16:34:45.69: [  899]: --> [2:OK]
Jul 28 16:34:45.69: [  899]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Jul 28 16:34:45.71: [  899]: --> [2:OK]
Jul 28 16:34:45.71: [  899]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:34:45.72: [  899]: --> [2:OK]
Jul 28 16:34:45.72: [  899]: <-- [5:ATM0\r]
Jul 28 16:34:45.73: [  899]: --> [2:OK]
Jul 28 16:34:45.73: [  899]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:34:45.84: [  899]: --> [2:OK]
Jul 28 16:34:45.84: [  899]: DIAL 65299832
Jul 28 16:34:45.84: [  899]: <-- [13:ATDT65299832\r]
Jul 28 16:34:55.61: [  899]: --> [7:CONNECT]
Jul 28 16:34:57.49: [  899]: --> [2:OK]
Jul 28 16:34:57.49: [  899]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 00
02 95 80 08 01 49 02 57 49 4E 53 54 41 52 20 49 4E 54 27 4C 20 54 52 03 57"
Jul 28 16:34:57.49: [  899]: NSF remote fax equipment: Panasonic
Jul 28 16:34:57.49: [  899]: NSF remote station ID: "WINSTAR INT'L TR"
Jul 28 16:34:57.49: [  899]: <-- [9:AT+FRH=3\r]
Jul 28 16:34:57.50: [  899]: --> [7:CONNECT]
Jul 28 16:34:58.24: [  899]: --> [2:OK]
Jul 28 16:34:58.24: [  899]: REMOTE CSI "86 22 65299826"
Jul 28 16:34:58.24: [  899]: <-- [9:AT+FRH=3\r]
Jul 28 16:34:58.25: [  899]: --> [7:CONNECT]
Jul 28 16:34:58.61: [  899]: --> [2:OK]
Jul 28 16:34:58.61: [  899]: REMOTE best rate 9600 bit/s
Jul 28 16:34:58.61: [  899]: REMOTE max page width 1728 pixels in 215 mm
Jul 28 16:34:58.61: [  899]: REMOTE max unlimited page length
Jul 28 16:34:58.61: [  899]: REMOTE best vres 7.7 line/mm
Jul 28 16:34:58.61: [  899]: REMOTE best format 2-D MR
Jul 28 16:34:58.61: [  899]: REMOTE best 20 ms/scanline
Jul 28 16:34:58.61: [  899]: USE 9600 bit/s
Jul 28 16:34:58.61: [  899]: USE 20 ms/scanline
Jul 28 16:34:58.61: [  899]: SEND file "docq/doc24.ps;40"
Jul 28 16:34:58.61: [  899]: USE page width 1728 pixels in 215 mm
Jul 28 16:34:58.61: [  899]: USE unlimited page length
Jul 28 16:34:58.61: [  899]: USE 3.85 line/mm

Jul 28 16:34:58.61: [  899]: USE 2-D MR
Jul 28 16:34:58.61: [  899]: USE 2-D MR
Jul 28 16:34:58.61: [  899]: SEND training at v.29 9600 bit/s
Jul 28 16:34:58.61: [  899]: <-- [9:AT+FTH=3\r]
Jul 28 16:34:58.66: [  899]: --> [7:CONNECT]
Jul 28 16:34:58.66: [  899]: <-- data [23]
Jul 28 16:34:58.66: [  899]: <-- data [2]
Jul 28 16:35:00.44: [  899]: --> [7:CONNECT]
Jul 28 16:35:00.44: [  899]: <-- data [6]
Jul 28 16:35:00.44: [  899]: <-- data [2]
Jul 28 16:35:00.88: [  899]: --> [2:OK]
Jul 28 16:35:00.88: [  899]: DELAY 75 ms
Jul 28 16:35:00.96: [  899]: <-- [10:AT+FTM=96\r]
Jul 28 16:35:01.02: [  899]: --> [7:CONNECT]
Jul 28 16:35:01.02: [  899]: <-- data [1024]
Jul 28 16:35:01.02: [  899]: <-- data [776]
Jul 28 16:35:01.02: [  899]: <-- data [2]
Jul 28 16:35:02.97: [  899]: --> [2:OK]
Jul 28 16:35:02.97: [  899]: <-- [9:AT+FRH=3\r]
Jul 28 16:35:03.73: [  899]: --> [7:CONNECT]
Jul 28 16:35:04.68: [  899]: --> [2:OK]
Jul 28 16:35:04.68: [  899]: DELAY 1500 ms
Jul 28 16:35:06.18: [  899]: SEND training at v.29 7200 bit/s
Jul 28 16:35:06.18: [  899]: <-- [9:AT+FTH=3\r]
Jul 28 16:35:06.23: [  899]: --> [7:CONNECT]
Jul 28 16:35:06.23: [  899]: <-- data [23]
Jul 28 16:35:06.23: [  899]: <-- data [2]
Jul 28 16:35:08.01: [  899]: --> [7:CONNECT]
Jul 28 16:35:08.01: [  899]: <-- data [6]
Jul 28 16:35:08.01: [  899]: <-- data [2]
Jul 28 16:35:08.45: [  899]: --> [2:OK]
Jul 28 16:35:08.45: [  899]: DELAY 75 ms
Jul 28 16:35:08.53: [  899]: <-- [10:AT+FTM=72\r]
Jul 28 16:35:08.59: [  899]: --> [7:CONNECT]
Jul 28 16:35:08.59: [  899]: <-- data [1024]
Jul 28 16:35:08.59: [  899]: <-- data [326]
Jul 28 16:35:08.59: [  899]: <-- data [2]
Jul 28 16:35:10.54: [  899]: --> [2:OK]
Jul 28 16:35:10.54: [  899]: <-- [9:AT+FRH=3\r]
Jul 28 16:35:11.33: [  899]: --> [7:CONNECT]
Jul 28 16:35:12.25: [  899]: --> [2:OK]
Jul 28 16:35:12.25: [  899]: DELAY 1500 ms
Jul 28 16:35:13.75: [  899]: SEND training at v.27ter 4800 bit/s
Jul 28 16:35:13.75: [  899]: <-- [9:AT+FTH=3\r]
Jul 28 16:35:13.80: [  899]: --> [7:CONNECT]
Jul 28 16:35:13.80: [  899]: <-- data [23]
Jul 28 16:35:13.80: [  899]: <-- data [2]
Jul 28 16:35:15.58: [  899]: --> [7:CONNECT]
Jul 28 16:35:15.58: [  899]: <-- data [6]
Jul 28 16:35:15.58: [  899]: <-- data [2]
Jul 28 16:35:16.02: [  899]: --> [2:OK]
Jul 28 16:35:16.02: [  899]: DELAY 75 ms
Jul 28 16:35:16.10: [  899]: <-- [10:AT+FTM=48\r]
Jul 28 16:35:16.14: [  899]: --> [7:CONNECT]
Jul 28 16:35:16.14: [  899]: <-- data [900]
Jul 28 16:35:16.14: [  899]: <-- data [2]
Jul 28 16:35:18.57: [  899]: --> [2:OK]
Jul 28 16:35:18.57: [  899]: <-- [9:AT+FRH=3\r]
Jul 28 16:35:19.34: [  899]: --> [7:CONNECT]
Jul 28 16:35:20.26: [  899]: --> [2:OK]
Jul 28 16:35:20.26: [  899]: TRAINING succeeded
Jul 28 16:35:20.26: [  899]: <-- [10:AT+FTM=48\r]
Jul 28 16:35:20.30: [  899]: --> [7:CONNECT]
Jul 28 16:35:20.30: [  899]: SEND begin page
Jul 28 16:35:20.30: [  899]: <-- data [1027]
Jul 28 16:35:20.30: [  899]: <-- data [1026]
Jul 28 16:35:20.30: [  899]: <-- data [1032]
Jul 28 16:35:20.30: [  899]: <-- data [1030]
Jul 28 16:35:21.89: [  899]: <-- data [1038]
Jul 28 16:35:21.89: [  899]: <-- data [1030]
Jul 28 16:35:23.49: [  899]: <-- data [1032]
Jul 28 16:35:25.08: [  899]: <-- data [1032]
Jul 28 16:35:26.70: [  899]: <-- data [1034]
Jul 28 16:35:29.10: [  899]: <-- data [1029]
Jul 28 16:35:30.71: [  899]: <-- data [1029]
Jul 28 16:35:32.32: [  899]: <-- data [1032]
Jul 28 16:35:33.93: [  899]: <-- data [1031]
Jul 28 16:35:35.55: [  899]: <-- data [440]
Jul 28 16:35:36.35: [  899]: SENT 13751 bytes of data
Jul 28 16:35:36.35: [  899]: <-- data [1032]
Jul 28 16:35:37.94: [  899]: <-- data [1035]
Jul 28 16:35:39.55: [  899]: <-- data [1031]
Jul 28 16:35:41.17: [  899]: <-- data [1029]
Jul 28 16:35:43.56: [  899]: <-- data [1034]
Jul 28 16:35:45.16: [  899]: <-- data [1031]
Jul 28 16:35:46.76: [  899]: <-- data [1029]
Jul 28 16:35:48.37: [  899]: <-- data [1040]
Jul 28 16:35:49.96: [  899]: <-- data [1030]
Jul 28 16:35:51.57: [  899]: <-- data [1031]
Jul 28 16:35:53.16: [  899]: <-- data [1038]
Jul 28 16:35:54.75: [  899]: <-- data [1033]
Jul 28 16:35:57.15: [  899]: <-- data [1032]
Jul 28 16:35:58.74: [  899]: <-- data [388]
Jul 28 16:35:59.53: [  899]: SENT 13696 bytes of data
Jul 28 16:35:59.53: [  899]: <-- data [1028]
Jul 28 16:36:01.16: [  899]: <-- data [1031]
Jul 28 16:36:02.77: [  899]: <-- data [1030]
Jul 28 16:36:04.39: [  899]: <-- data [1030]
Jul 28 16:36:05.98: [  899]: <-- data [1029]
Jul 28 16:36:07.57: [  899]: <-- data [1032]
Jul 28 16:36:09.16: [  899]: <-- data [1027]
Jul 28 16:36:10.78: [  899]: <-- data [1026]
Jul 28 16:36:13.16: [  899]: <-- data [1027]
Jul 28 16:36:14.75: [  899]: <-- data [1030]
Jul 28 16:36:16.34: [  899]: <-- data [1031]
Jul 28 16:36:17.94: [  899]: <-- data [1028]
Jul 28 16:36:19.53: [  899]: <-- data [833]
Jul 28 16:36:21.13: [  899]: SENT 13115 bytes of data
Jul 28 16:36:21.13: [  899]: SEND 2D RTC
Jul 28 16:36:21.13: [  899]: <-- data [30]
Jul 28 16:36:21.13: [  899]: <-- data [2]
Jul 28 16:36:21.13: [  899]: SEND end page
Jul 28 16:36:28.88: [  899]: --> [2:OK]
Jul 28 16:36:28.88: [  899]: DELAY 95 ms
Jul 28 16:36:28.88: [  899]: DELAY 95 ms
Jul 28 16:36:28.98: [  899]: SEND send EOP (no more pages or documents)
Jul 28 16:36:28.98: [  899]: <-- [9:AT+FTH=3\r]
Jul 28 16:36:29.03: [  899]: --> [7:CONNECT]
Jul 28 16:36:29.03: [  899]: <-- data [3]
Jul 28 16:36:29.03: [  899]: <-- data [2]
Jul 28 16:36:30.35: [  899]: --> [2:OK]
Jul 28 16:36:30.35: [  899]: <-- [9:AT+FRH=3\r]
Jul 28 16:36:30.77: [  899]: --> [7:CONNECT]
Jul 28 16:36:31.71: [  899]: --> [2:OK]
Jul 28 16:36:31.71: [  899]: SEND recv MCF (message confirmation)
Jul 28 16:36:31.71: [  899]: SEND FAX (00000035): FROM localhost@192.168.2.11 TO
 65299832 (page 1 of 1 sent in 1:33)
Jul 28 16:36:31.71: [  899]: SEND FAX (00000035): FROM localhost@192.168.2.11 TO
 65299832 (docq/doc24.ps;40 sent in 1:33)
Jul 28 16:36:31.71: [  899]: <-- [9:AT+FTH=3\r]
Jul 28 16:36:31.76: [  899]: --> [7:CONNECT]
Jul 28 16:36:31.76: [  899]: <-- data [3]
Jul 28 16:36:31.76: [  899]: <-- data [2]
Jul 28 16:36:33.08: [  899]: --> [2:OK]
Jul 28 16:36:33.08: [  899]: <-- [5:ATH0\r]
Jul 28 16:36:33.78: [  899]: --> [2:OK]
Jul 28 16:36:33.78: [  899]: SESSION END

2) send by tty61a() it is send a half of paper:
[root@tang log]# vi c00000033
Jul 28 16:24:00.25: [  709]: SESSION BEGIN 00000033 862265299832
Jul 28 16:24:00.25: [  709]: SEND FAX: JOB 23 DEST 65299832 COMMID 00000033
Jul 28 16:24:00.25: [  709]: DELAY 2600 ms
Jul 28 16:24:03.02: [  709]: <-- [4:ATZ\r]
Jul 28 16:24:03.13: [  709]: --> [2:OK]
Jul 28 16:24:03.13: [  709]: <-- [15:ATE0V1Q0S0=0H0\r]
Jul 28 16:24:03.23: [  709]: --> [14:ATE0V1Q0S0=0H0]
Jul 28 16:24:03.23: [  709]: --> [2:OK]
Jul 28 16:24:03.23: [  709]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Jul 28 16:24:03.33: [  709]: --> [2:OK]
Jul 28 16:24:03.33: [  709]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:24:03.43: [  709]: --> [2:OK]
Jul 28 16:24:03.43: [  709]: <-- [7:ATL0M1\r]
Jul 28 16:24:03.53: [  709]: --> [2:OK]
Jul 28 16:24:03.53: [  709]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:24:03.73: [  709]: --> [2:OK]
Jul 28 16:24:03.73: [  709]: DIAL 65299832
Jul 28 16:24:03.73: [  709]: <-- [13:ATDT65299832\r]
Jul 28 16:24:13.63: [  709]: --> [7:CONNECT]
Jul 28 16:24:15.53: [  709]: --> [2:OK]
Jul 28 16:24:15.53: [  709]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 00
02 95 80 08 01 49 02 57 49 4E 53 54 41 52 20 49 4E 54 27 4C 20 54 52 03 57"
Jul 28 16:24:00.25: [  709]: SESSION BEGIN 00000033 862265299832
Jul 28 16:24:00.25: [  709]: SEND FAX: JOB 23 DEST 65299832 COMMID 00000033
Jul 28 16:24:00.25: [  709]: DELAY 2600 ms
Jul 28 16:24:03.02: [  709]: <-- [4:ATZ\r]
Jul 28 16:24:03.13: [  709]: --> [2:OK]
Jul 28 16:24:03.13: [  709]: <-- [15:ATE0V1Q0S0=0H0\r]
Jul 28 16:24:03.23: [  709]: --> [14:ATE0V1Q0S0=0H0]
Jul 28 16:24:03.23: [  709]: --> [2:OK]
Jul 28 16:24:03.23: [  709]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Jul 28 16:24:03.33: [  709]: --> [2:OK]
Jul 28 16:24:03.33: [  709]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:24:03.43: [  709]: --> [2:OK]
Jul 28 16:24:03.43: [  709]: <-- [7:ATL0M1\r]
Jul 28 16:24:03.53: [  709]: --> [2:OK]
Jul 28 16:24:03.53: [  709]: <-- [12:AT+FCLASS=1\r]
Jul 28 16:24:03.73: [  709]: --> [2:OK]
Jul 28 16:24:03.73: [  709]: DIAL 65299832
Jul 28 16:24:03.73: [  709]: <-- [13:ATDT65299832\r]
Jul 28 16:24:13.63: [  709]: --> [7:CONNECT]
Jul 28 16:24:15.53: [  709]: --> [2:OK]
Jul 28 16:24:15.53: [  709]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 00
02 95 80 08 01 49 02 57 49 4E 53 54 41 52 20 49 4E 54 27 4C 20 54 52 03 57"
Jul 28 16:24:15.53: [  709]: NSF remote fax equipment: Panasonic
Jul 28 16:24:15.53: [  709]: NSF remote station ID: "WINSTAR INT'L TR"
Jul 28 16:24:15.53: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:24:15.63: [  709]: --> [7:CONNECT]
Jul 28 16:24:16.23: [  709]: --> [2:OK]
Jul 28 16:24:16.23: [  709]: REMOTE CSI "86 22 65299826"
Jul 28 16:24:16.23: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:24:16.33: [  709]: --> [7:CONNECT]
Jul 28 16:24:16.73: [  709]: --> [2:OK]
Jul 28 16:24:16.73: [  709]: REMOTE best rate 9600 bit/s
Jul 28 16:24:16.73: [  709]: REMOTE max page width 1728 pixels in 215 mm
Jul 28 16:24:16.73: [  709]: REMOTE max unlimited page length
Jul 28 16:24:16.73: [  709]: REMOTE best vres 7.7 line/mm
Jul 28 16:24:16.73: [  709]: REMOTE best format 2-D MR
Jul 28 16:24:16.73: [  709]: REMOTE best 20 ms/scanline
Jul 28 16:24:16.73: [  709]: USE 9600 bit/s
Jul 28 16:24:16.73: [  709]: USE 20 ms/scanline
Jul 28 16:24:16.73: [  709]: SEND file "docq/doc23.ps;40"
Jul 28 16:24:16.73: [  709]: USE page width 1728 pixels in 215 mm
Jul 28 16:24:16.73: [  709]: USE unlimited page length
Jul 28 16:24:16.73: [  709]: USE 3.85 line/mm

Jul 28 16:24:16.73: [  709]: USE 2-D MR
Jul 28 16:24:16.73: [  709]: USE 2-D MR
Jul 28 16:24:16.73: [  709]: SEND training at v.29 9600 bit/s
Jul 28 16:24:16.73: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:24:16.83: [  709]: --> [7:CONNECT]
Jul 28 16:24:16.83: [  709]: <-- data [23]
Jul 28 16:24:16.83: [  709]: <-- data [2]
Jul 28 16:24:18.63: [  709]: --> [7:CONNECT]
Jul 28 16:24:18.63: [  709]: <-- data [6]
Jul 28 16:24:18.63: [  709]: <-- data [2]
Jul 28 16:24:19.03: [  709]: --> [2:OK]
Jul 28 16:24:19.03: [  709]: DELAY 75 ms
Jul 28 16:24:19.11: [  709]: <-- [10:AT+FTM=96\r]
Jul 28 16:24:19.23: [  709]: --> [7:CONNECT]
Jul 28 16:24:19.23: [  709]: <-- data [1024]
Jul 28 16:24:19.23: [  709]: <-- data [776]
Jul 28 16:24:19.23: [  709]: <-- data [2]
Jul 28 16:24:21.13: [  709]: --> [2:OK]
Jul 28 16:24:21.13: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:24:21.93: [  709]: --> [7:CONNECT]
Jul 28 16:24:22.83: [  709]: --> [2:OK]
Jul 28 16:24:22.83: [  709]: DELAY 1500 ms
Jul 28 16:24:24.33: [  709]: SEND training at v.29 7200 bit/s
Jul 28 16:24:24.33: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:24:24.43: [  709]: --> [7:CONNECT]
Jul 28 16:24:24.43: [  709]: <-- data [23]
Jul 28 16:24:24.43: [  709]: <-- data [2]
Jul 28 16:24:26.23: [  709]: --> [7:CONNECT]
Jul 28 16:24:26.23: [  709]: <-- data [6]
Jul 28 16:24:26.23: [  709]: <-- data [2]
Jul 28 16:24:26.63: [  709]: --> [2:OK]
Jul 28 16:24:26.63: [  709]: DELAY 75 ms
Jul 28 16:24:26.71: [  709]: <-- [10:AT+FTM=72\r]
Jul 28 16:24:26.83: [  709]: --> [7:CONNECT]
Jul 28 16:24:26.83: [  709]: <-- data [1024]
Jul 28 16:24:26.83: [  709]: <-- data [326]
Jul 28 16:24:26.83: [  709]: <-- data [2]
Jul 28 16:24:28.73: [  709]: --> [2:OK]
Jul 28 16:24:28.73: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:24:29.53: [  709]: --> [7:CONNECT]
Jul 28 16:24:30.53: [  709]: --> [2:OK]
Jul 28 16:24:30.53: [  709]: TRAINING succeeded
Jul 28 16:24:30.53: [  709]: <-- [10:AT+FTM=72\r]
Jul 28 16:24:30.63: [  709]: --> [7:CONNECT]
Jul 28 16:24:30.63: [  709]: SEND begin page
Jul 28 16:24:30.63: [  709]: <-- data [1031]
Jul 28 16:24:30.63: [  709]: <-- data [1026]
Jul 28 16:24:30.63: [  709]: <-- data [1028]
Jul 28 16:24:30.63: [  709]: <-- data [1028]
Jul 28 16:24:30.63: [  709]: <-- data [1030]
Jul 28 16:24:31.02: [  709]: <-- data [1038]
Jul 28 16:24:31.02: [  709]: <-- data [1034]
Jul 28 16:24:31.52: [  709]: <-- data [1030]
Jul 28 16:24:31.52: [  709]: <-- data [1033]
Jul 28 16:24:32.02: [  709]: <-- data [1032]
Jul 28 16:24:32.02: [  709]: <-- data [1028]
Jul 28 16:24:32.62: [  709]: <-- data [1029]
Jul 28 16:24:32.62: [  709]: <-- data [1032]
Jul 28 16:24:33.22: [  709]: <-- data [1031]
Jul 28 16:24:33.22: [  709]: <-- data [1028]
Jul 28 16:24:33.82: [  709]: <-- data [1034]
Jul 28 16:24:33.82: [  709]: <-- data [1030]
Jul 28 16:24:33.82: [  709]: <-- data [1033]
Jul 28 16:24:34.42: [  709]: <-- data [1029]
Jul 28 16:24:34.42: [  709]: <-- data [1034]
Jul 28 16:24:35.12: [  709]: <-- data [143]
Jul 28 16:24:35.12: [  709]: SENT 20623 bytes of data
Jul 28 16:24:35.12: [  709]: <-- data [1031]
Jul 28 16:24:35.12: [  709]: <-- data [1027]
Jul 28 16:24:35.62: [  709]: <-- data [1040]
Jul 28 16:24:35.62: [  709]: <-- data [1028]
Jul 28 16:24:36.32: [  709]: <-- data [1030]
Jul 28 16:24:36.32: [  709]: <-- data [1040]
Jul 28 16:24:36.92: [  709]: <-- data [1033]
Jul 28 16:24:36.92: [  709]: <-- data [1031]
Jul 28 16:24:36.92: [  709]: <-- data [1030]
Jul 28 16:24:37.42: [  709]: <-- data [1028]
Jul 28 16:24:37.42: [  709]: <-- data [1030]
Jul 28 16:24:38.02: [  709]: <-- data [1029]
Jul 28 16:24:38.02: [  709]: <-- data [1029]
Jul 28 16:24:38.62: [  709]: <-- data [1031]
Jul 28 16:24:38.62: [  709]: <-- data [1031]
Jul 28 16:24:39.12: [  709]: <-- data [1028]
Jul 28 16:24:39.12: [  709]: <-- data [1026]
Jul 28 16:24:39.72: [  709]: <-- data [1026]
Jul 28 16:24:39.72: [  709]: <-- data [1027]
Jul 28 16:24:39.72: [  709]: <-- data [1031]
Jul 28 16:24:40.42: [  709]: <-- data [139]
Jul 28 16:24:40.42: [  709]: SENT 20619 bytes of data
Jul 28 16:24:40.42: [  709]: <-- data [1031]
Jul 28 16:24:40.42: [  709]: <-- data [1026]
Jul 28 16:24:41.02: [  709]: <-- data [1030]
Jul 28 16:24:41.02: [  709]: <-- data [38]
Jul 28 16:24:41.02: [  709]: SENT 3110 bytes of data
Jul 28 16:24:41.02: [  709]: SEND 2D RTC
Jul 28 16:24:41.02: [  709]: <-- data [30]
Jul 28 16:24:41.02: [  709]: <-- data [2]
Jul 28 16:24:41.02: [  709]: SEND end page
Jul 28 16:24:56.03: [  709]: --> [2:OK]
Jul 28 16:24:56.03: [  709]: DELAY 95 ms
Jul 28 16:24:56.13: [  709]: SEND send EOP (no more pages or documents)
Jul 28 16:24:56.13: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:24:56.23: [  709]: --> [7:CONNECT]
Jul 28 16:24:56.23: [  709]: <-- data [3]
Jul 28 16:24:56.23: [  709]: <-- data [2]
Jul 28 16:24:57.53: [  709]: --> [2:OK]
Jul 28 16:24:57.53: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:24:58.03: [  709]: --> [7:CONNECT]
Jul 28 16:24:58.93: [  709]: --> [2:OK]
Jul 28 16:24:58.93: [  709]: SEND recv RTN (retrain negative)
Jul 28 16:24:58.93: [  709]: SEND training at v.27ter 4800 bit/s
Jul 28 16:24:58.93: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:24:59.03: [  709]: --> [7:CONNECT]
Jul 28 16:24:59.03: [  709]: <-- data [23]
Jul 28 16:24:59.03: [  709]: <-- data [2]
Jul 28 16:25:00.83: [  709]: --> [7:CONNECT]
Jul 28 16:25:00.83: [  709]: <-- data [6]
Jul 28 16:25:00.83: [  709]: <-- data [2]
Jul 28 16:25:01.23: [  709]: --> [2:OK]
Jul 28 16:25:01.23: [  709]: DELAY 75 ms
Jul 28 16:25:01.31: [  709]: <-- [10:AT+FTM=48\r]
Jul 28 16:25:01.43: [  709]: --> [7:CONNECT]
Jul 28 16:25:01.43: [  709]: <-- data [900]
Jul 28 16:25:01.43: [  709]: <-- data [2]
Jul 28 16:25:03.83: [  709]: --> [2:OK]
Jul 28 16:25:03.83: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:25:04.63: [  709]: --> [7:CONNECT]
Jul 28 16:25:05.53: [  709]: --> [2:OK]
Jul 28 16:25:05.53: [  709]: TRAINING succeeded
Jul 28 16:25:05.53: [  709]: <-- [10:AT+FTM=48\r]
Jul 28 16:25:05.63: [  709]: --> [7:CONNECT]
Jul 28 16:25:05.63: [  709]: SEND begin page
Jul 28 16:25:05.63: [  709]: <-- data [1031]
Jul 28 16:25:05.63: [  709]: <-- data [1026]
Jul 28 16:25:05.63: [  709]: <-- data [1032]
Jul 28 16:25:05.63: [  709]: <-- data [1030]
Jul 28 16:25:05.63: [  709]: <-- data [1038]
Jul 28 16:25:06.02: [  709]: <-- data [1030]
Jul 28 16:25:06.02: [  709]: <-- data [1032]
Jul 28 16:25:06.52: [  709]: <-- data [1032]
Jul 28 16:25:06.52: [  709]: <-- data [1034]
Jul 28 16:25:07.12: [  709]: <-- data [1029]
Jul 28 16:25:07.12: [  709]: <-- data [1029]
Jul 28 16:25:07.72: [  709]: <-- data [1032]
Jul 28 16:25:07.72: [  709]: <-- data [1031]
Jul 28 16:25:07.72: [  709]: <-- data [401]
Jul 28 16:25:08.32: [  709]: SENT 13712 bytes of data
Jul 28 16:25:08.32: [  709]: <-- data [1031]
Jul 28 16:25:08.32: [  709]: <-- data [1036]
Jul 28 16:25:08.82: [  709]: <-- data [1031]
Jul 28 16:25:08.82: [  709]: <-- data [1029]
Jul 28 16:25:09.42: [  709]: <-- data [1034]
Jul 28 16:25:09.42: [  709]: <-- data [1031]
Jul 28 16:25:09.42: [  709]: <-- data [1029]
Jul 28 16:25:10.02: [  709]: <-- data [1040]
Jul 28 16:25:10.02: [  709]: <-- data [1030]
Jul 28 16:25:10.62: [  709]: <-- data [1031]
Jul 28 16:25:10.62: [  709]: <-- data [1038]
Jul 28 16:25:11.22: [  709]: <-- data [1032]
Jul 28 16:25:11.22: [  709]: <-- data [1033]
Jul 28 16:25:11.72: [  709]: <-- data [428]
Jul 28 16:25:11.72: [  709]: SENT 13736 bytes of data
Jul 28 16:25:11.72: [  709]: <-- data [1028]
Jul 28 16:25:11.72: [  709]: <-- data [1031]
Jul 28 16:25:12.32: [  709]: <-- data [1030]
Jul 28 16:25:12.32: [  709]: <-- data [1030]
Jul 28 16:25:12.92: [  709]: <-- data [1029]
Jul 28 16:25:12.92: [  709]: <-- data [1032]
Jul 28 16:25:13.42: [  709]: <-- data [1027]
Jul 28 16:25:13.42: [  709]: <-- data [1026]
Jul 28 16:25:14.02: [  709]: <-- data [1027]
Jul 28 16:25:14.02: [  709]: <-- data [1030]
Jul 28 16:25:14.72: [  709]: <-- data [1031]
Jul 28 16:25:14.72: [  709]: <-- data [1028]
Jul 28 16:25:14.72: [  709]: <-- data [833]
Jul 28 16:25:15.32: [  709]: SENT 13115 bytes of data
Jul 28 16:25:15.32: [  709]: SEND 2D RTC
Jul 28 16:25:15.32: [  709]: <-- data [30]
Jul 28 16:25:15.32: [  709]: <-- data [2]
Jul 28 16:25:15.32: [  709]: SEND end page
Jul 28 16:25:36.83: [  709]: --> [2:OK]
Jul 28 16:25:36.83: [  709]: DELAY 95 ms
Jul 28 16:25:36.93: [  709]: SEND send EOP (no more pages or documents)
Jul 28 16:25:36.93: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:25:37.03: [  709]: --> [7:CONNECT]
Jul 28 16:25:37.03: [  709]: <-- data [3]
Jul 28 16:25:37.03: [  709]: <-- data [2]
Jul 28 16:25:38.33: [  709]: --> [2:OK]
Jul 28 16:25:38.33: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:25:41.43: [  709]: --> [0:]
Jul 28 16:25:41.43: [  709]: MODEM <Empty line>
Jul 28 16:25:41.43: [  709]: <-- data [1]
Jul 28 16:25:41.53: [  709]: --> [2:OK]
Jul 28 16:25:41.53: [  709]: SEND send EOP (no more pages or documents)
Jul 28 16:25:41.53: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:25:41.63: [  709]: --> [7:CONNECT]
Jul 28 16:25:41.63: [  709]: <-- data [3]
Jul 28 16:25:41.63: [  709]: <-- data [2]
Jul 28 16:25:42.93: [  709]: --> [2:OK]
Jul 28 16:25:42.93: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:25:46.03: [  709]: --> [0:]
Jul 28 16:25:46.03: [  709]: MODEM <Empty line>
Jul 28 16:25:46.03: [  709]: MODEM <Empty line>
Jul 28 16:25:46.03: [  709]: <-- data [1]
Jul 28 16:25:46.13: [  709]: --> [2:OK]
Jul 28 16:25:46.13: [  709]: SEND send EOP (no more pages or documents)
Jul 28 16:25:46.13: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:25:46.23: [  709]: --> [7:CONNECT]
Jul 28 16:25:46.23: [  709]: <-- data [3]
Jul 28 16:25:46.23: [  709]: <-- data [2]
Jul 28 16:25:47.53: [  709]: --> [2:OK]
Jul 28 16:25:47.53: [  709]: <-- [9:AT+FRH=3\r]
Jul 28 16:25:50.63: [  709]: --> [0:]
Jul 28 16:25:50.63: [  709]: MODEM <Empty line>
Jul 28 16:25:50.63: [  709]: <-- data [1]
Jul 28 16:25:50.73: [  709]: --> [2:OK]
Jul 28 16:25:50.73: [  709]: No response to MPS or EOP repeated 3 tries
Jul 28 16:25:50.73: [  709]: <-- [9:AT+FTH=3\r]
Jul 28 16:25:50.83: [  709]: --> [7:CONNECT]
Jul 28 16:25:50.83: [  709]: <-- data [3]
Jul 28 16:25:50.83: [  709]: <-- data [2]
Jul 28 16:25:52.13: [  709]: --> [2:OK]
Jul 28 16:25:52.13: [  709]: <-- [5:ATH0\r]
Jul 28 16:25:52.93: [  709]: --> [2:OK]
Jul 28 16:25:53.02: [  709]: SESSION END



best regard
shiweilu



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
Follow-Ups:
- Re: [hylafax-users] Send Fax Error!!
  - From: Giulio Orsero
Prev by Date: [hylafax-users] (no subject)
Next by Date: [hylafax-users] can't hang up
Previous by thread: [hylafax-users] How to print columns or tables from Internet form data
Next by thread: Re: [hylafax-users] Send Fax Error!!
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions