Re: [hylafax-users] 8:+FCERROR while receiving

[Lee Howard <faxguy@deanox.com>]

At 02:38 PM 7/15/01 CEST, Jean-Pierre Schwickerath wrote:
>Hello, 
>
>I'm using Hylafax 4.1 rc2 with an Elsa Microlink 56k fun on LFS (Linux From
>Scratch) distribution, kernel 2.4.6
>
>When I am receiving faxes, I have many who stop after a short time with an
>fcerror
....
>Jul 03 21:16:33.46: [  947]: <-- [7:AT+FDR\r]
>Jul 03 21:16:33.46: [  947]: --> [8:+FCERROR]
....
>All I could find out is that these faxes are computers, the first one is
>WinfaxPro 9.0  and the second is a web to fax gateway from the german
provider
>web.de
>receiving faxes from "normal" fax machines are no problem. 
>I'm running hylafax as getty in /etc/inittab
>
>Does someone have an idea why I don't get a --> [5:+FCFR] and -->
[7:+CONNECT]
>as usual ?

I've seen something similar here before in Class 1.  In fact, this is the
*only* reoccuring error I get in Class 1 receiving.

Jul 12 07:30:50.43: [13988]: DELAY 75 ms
Jul 12 07:30:50.51: [13988]: <-- [9:AT+FTH=3\r]
Jul 12 07:30:51.37: [13988]: --> [7:CONNECT]
Jul 12 07:30:51.37: [13988]: <-- HDLC<3:FF C8 21>
Jul 12 07:30:51.69: [13988]: --> [2:OK]
Jul 12 07:30:51.69: [13988]: TRAINING succeeded
Jul 12 07:30:51.69: [13988]: MODEM input buffering enabled
Jul 12 07:30:51.69: [13988]: <-- [11:AT+FRM=146\r]
Jul 12 07:30:51.88: [13988]: --> [8:+FCERROR]
Jul 12 07:30:51.88: [13988]: MODEM input buffering disabled
Jul 12 07:30:51.88: [13988]: <-- [9:AT+FRH=3\r]
Jul 12 07:30:52.82: [13988]: --> [7:CONNECT]
Jul 12 07:30:57.82: [13988]: MODEM TIMEOUT: receiving HDLC frame data

I don't have an answer yet, though.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null