HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Hylafax 4.1 - Windows Client (Cypheus)



Dear All,
 
I am using the new Hylafax 4.1 with Cyheus. And have troubling logging in - but selectively.
 
Here is my hosts.hfaxd file with a few explaining comments :
 
---------------------------
localhost
127.0.0.1
10.0.0.101                                           #IP Address of my workstation (Win2K)
10.0.0.102                                           #IP Address of other workstation (Win2K)
207.230.xxx.xxx                                   #IP Address of my home cable connection (WinME)
kulraj:1001:a.jFArLp1GjRU
user2:1002:sUcvp2Wz5QhgY
---------------------------
 
The hylafax server is running FreeBSD 4.3 has an external network interface (204.xxx.xxx.xxx) connected to internet; and an internal 10.x.x.x network card - so its a basically a natd box.
 
I did most of the configuration from home, and tested from there - I could logon to hylafax server via Cypheus and view incoming faxes without a problem. (Haven't tested outbound yet). Although faxes are being received I cannot log into the hylafax server from my Win2K machine at work. I have tried to connect to server at 10.0.0.1 or 204.xxx.xxx.xxx both to no avail. I get a Cypheus message, and I quote :
"You entered a wrong username or password. Please try again."
 
I don't think this is a Cypheus issue - but something in the configuratyion that I haven't done right.
But I re-itterate it worked like a charm from home. What am I missing? Something obvious no doubt.
 
Any and all advice gratefully appreciated.
 
Regards,
 
Kulraj Gurm
 
 
 
 
 
 
 



Project hosted by iFAX Solutions