Re: [hylafax-users] sendfax problem!!!!!!!

[Lee Howard <faxguy@deanox.com>]

At 01:00 PM 7/3/01 -0400, Jay R. Ashworth wrote:

>If you ran faxsetup and faxaddmodem, and maybe put faxgetty in /etc/inittab
>*as is suggested in the howto* :-), then your basic configuration
>should be done; certainly far enough that you should see dialage.
>
>I'd recommend, as a first step, reading through that excellent HOWTO
>document Lee's prepared, and see if you spot anything amiss.

Heh.  Apparently it's canon these days.  Note, however, the faxq manpage:

                         When faxq is  run  in  conjunction  with
       faxgetty processes, it is not necessary to use faxmodem to
       specify modems; instead the programs communicate  informa�
       tion about the status and capabilities of each modem.  The
       latter setup provides a more robust  and  powerful  system
       and is the intended way for the software to operate.

Note that last line; seems quite pointed, to me.  The *only* reason I can
see that someone would choose to not run faxgetty would be if they were
using the modem for purposes other than faxing (i.e. dial-up), and the
fax-function were only an occasional and temporary arrangement.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null