HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] (no subject)



On Mon, Jun 11, 2001 at 01:12:51PM +0200, mak@dannet.dk wrote:
> I would like to use hylafax together with an PRI card installed in
> a cisco 3640 router. I installed RedHat 7.x and rtty to establish
> reverse telnet connections to the modems in the router. I can use cu
> or minicom without trouble, but hylafax can't find (communicate with)
> the modems.
>
> I'll be very glad for any help ;-)

Unless you have a daemon/device driver that simulates a physical serial
port with modem control and flow control, you won't be able to use
HylaFAX to get back to the modem.  I'm not familiar with the Cisco
card, nor with rtty, but note that card must be *a modem*... not just
an ISDN Terminal Adaptor, there must be v.17 firmware for
analog-T.30-fax-over-B-channel in there, too.

Cheers,
-- jra
-- 
Jay R. Ashworth                                                jra@baylink.com
Member of the Technical Staff     Baylink
The Suncoast Freenet         The Things I Think
Tampa Bay, Florida        http://baylink.pitas.com             +1 727 804 5015

   OS X: Because making Unix user-friendly was easier than debugging Windows


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions