[hylafax-users] sendpage problem

[Matthias Henze <matthias@mhcsoftware.de>]

hi,

i've setup sendpage as described in the faq in order to send sms messages 
in germany. when i try to send a sms i get the following mail response as 
i've set SessionTracing to 0x0108F in order to get some detailed 
informations:

Jun 09 14:43:02.30: [ 5806]: SESSION BEGIN 00000450 491712521001
Jun 09 14:43:02.30: [ 5806]: SEND PAGE: JOB 32 DEST 01712521001 COMMID 
00000450
Jun 09 14:43:02.30: [ 5806]: MODEM set DTR OFF
Jun 09 14:43:02.30: [ 5806]: DELAY 2600 ms
Jun 09 14:43:04.90: [ 5806]: MODEM set DTR ON
Jun 09 14:43:04.90: [ 5806]: MODEM set baud rate: 19200 baud, input flow 
RTS/CTS, output flow RTS/CTS
Jun 09 14:43:04.90: [ 5806]: MODEM flush i/o
Jun 09 14:43:04.90: [ 5806]: <-- [15:ATE0V1Q0S0=0H0\r]
Jun 09 14:43:04.92: [ 5806]: --> [2:OK]
Jun 09 14:43:04.92: [ 5806]: <-- [12:ATS8=2S7=60\r]
Jun 09 14:43:04.94: [ 5806]: --> [2:OK]
Jun 09 14:43:04.94: [ 5806]: <-- [5:ATM0\r]
Jun 09 14:43:04.95: [ 5806]: --> [2:OK]
Jun 09 14:43:04.95: [ 5806]: MODEM set parity: 8 bits, no parity
Jun 09 14:43:04.95: [ 5806]: MODEM input buffering enabled
Jun 09 14:43:04.95: [ 5806]: <-- [12:AT+FCLASS=0\r]
Jun 09 14:43:05.07: [ 5806]: --> [2:OK]
Jun 09 14:43:05.07: [ 5806]: DIAL 01712521001
Jun 09 14:43:05.07: [ 5806]: <-- [21:ATX3DT0,01712521001@\r]
Jun 09 14:43:43.68: [ 5806]: --> [25:CONNECT 19200/LAPM/V42BIS]
Jun 09 14:43:43.68: [ 5806]: EXPECT ID (paging central identification)
Jun 09 14:43:43.68: [ 5806]: <-- <1:\015>
Jun 09 14:43:45.68: [ 5806]: MODEM TIMEOUT: reading line from modem
Jun 09 14:43:45.68: [ 5806]: --> <3:ID=>
Jun 09 14:43:45.68: [ 5806]: RECV ID ("ID=")
Jun 09 14:43:45.68: [ 5806]: SEND device identification/login request
Jun 09 14:43:45.68: [ 5806]: <-- <5:\033PG1\015>
Jun 09 14:43:45.92: [ 5806]: --> <7:2.9.0.2>
Jun 09 14:43:45.92: [ 5806]: RECV: 2.9.0.2
Jun 09 14:43:45.92: [ 5806]: --> <1:\006>
Jun 09 14:43:45.92: [ 5806]: RECV ACK (login successful)
Jun 09 14:43:46.47: [ 5806]: --> <3:\033[p>
Jun 09 14:43:46.47: [ 5806]: RECV go-ahead (prologue done)
Jun 09 14:43:46.47: [ 5806]: SEND message block
Jun 09 14:43:46.47: [ 5806]: <-- <29:\00249171xxxxxxx 
\015test\015\0034>;\015>
Jun 09 14:43:46.77: [ 5806]: --> <47:MESSAGE REJECTED - MSISDN EXCEEDS 20 
CHARACTERS>
Jun 09 14:43:46.77: [ 5806]: RECV: MESSAGE REJECTED - MSISDN EXCEEDS 20 
CHARACTERS
Jun 09 14:43:46.77: [ 5806]: --> <1:\036>
Jun 09 14:43:46.77: [ 5806]: RECV RS (message block rejected; skip to next)
Jun 09 14:43:46.77: [ 5806]: <-- [5:ATH0\r]
Jun 09 14:43:51.77: [ 5806]: MODEM TIMEOUT: reading line from modem
Jun 09 14:43:51.77: [ 5806]: MODEM <Timeout>
Jun 09 14:43:51.77: [ 5806]: MODEM input buffering enabled
Jun 09 14:43:51.77: [ 5806]: MODEM set DTR OFF
Jun 09 14:43:51.77: [ 5806]: SESSION END


(i've replaced the real number by xxxxxxx for this posting ...)

what's wrong ? MSISDN exceeds 20 charactes ??? i don't think so ...

BTW: hylafax stats: HylaFAX (tm) Version 4.1beta2

any ideas ?

TIA


Matthias Henze                             MH458-RIPE
matthias@mhcsoftware.de

Use PGP!! http://www.mhcsoftware.de/MatthiasHenze.asc
-----------------------------------------------------
MHC SoftWare GmbH          voice: +49-(0)9533-92006-0
Fichtera 17                  fax: +49-(0)9533-92006-6
96274 Itzgrund/Germany    e-Mail: info@mhcsoftware.de
-----------------------------------------------------



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null