[hylafax-users] Re[2]: Problem with reconfigure

["Franke, Marcus" <Marcus.Franke@DE472870.vw-group.com>]

Hello Lee,

Wednesday, June 06, 2001, 6:30:15 PM, you wrote:

LH> At 04:34 PM 6/6/01 +0200, Franke, Marcus wrote:
>>Hello hylafax-users,
>>
>>I need to configure my Zyxel2864 to operate in 1-D MR modus
>>for some testes..
>>
>>I added in ./etc/config.modem
>>RecvDataFormat               1-D MR
>>and did a restart of hylafax/faxgetty
>>
>>The Testfax I then sent to myself was received in
>>2-D MR and not 1-D.. what did I do wrong?

LH> Forgot the colon and quotes, perhaps?

LH> RecvDataFormat: "1-D MR"
ahem..
/me whistles innocently..

As time goes by and hylafax and faxgetty restart, I can
now say that it is still "2-D MR" :( Hmm, it did not
work..

Not here is the log and my config, I hope you can find
something I oversee..

-- 
Best regards,
 Marcus                            mailto:Marcus.Franke@de472870.vw-group.com

config.modem

Jun 07 07:55:06.06: [  405]: SESSION BEGIN 00000054 494151892550
Jun 07 07:55:06.06: [  405]: <-- [4:ATA\r]
Jun 07 07:55:20.06: [  405]: --> [11:CONNECT FAX]
Jun 07 07:55:20.06: [  405]: ANSWER: FAX CONNECTION
Jun 07 07:55:20.06: [  405]: MODEM input buffering enabled
Jun 07 07:55:20.06: [  405]: RECV FAX: begin
Jun 07 07:55:20.17: [  405]: --> [4:+FCO]
Jun 07 07:55:22.57: [  405]: --> [26:+FTI:     +49 4151 892599 ]
Jun 07 07:55:22.57: [  405]: REMOTE TSI "+49 4151 892599"
Jun 07 07:55:22.57: [  405]: --> [20:+FCS:0,3,0,2,1,0,0,3]
Jun 07 07:55:22.57: [  405]: REMOTE wants 9600 bit/s
Jun 07 07:55:22.57: [  405]: REMOTE wants page width 1728 pixels in 215 mm
Jun 07 07:55:22.57: [  405]: REMOTE wants unlimited page length 
Jun 07 07:55:22.57: [  405]: REMOTE wants 3.85 line/mm
Jun 07 07:55:22.57: [  405]: REMOTE wants 2-D MR
Jun 07 07:55:22.57: [  405]: --> [2:OK]
Jun 07 07:55:22.57: [  405]: <-- [7:AT+FDR\r]
Jun 07 07:55:24.12: [  405]: --> [20:+FCS:0,3,0,2,1,0,0,3]
Jun 07 07:55:24.12: [  405]: REMOTE wants 9600 bit/s
Jun 07 07:55:24.12: [  405]: REMOTE wants page width 1728 pixels in 215 mm
Jun 07 07:55:24.12: [  405]: REMOTE wants unlimited page length 
Jun 07 07:55:24.12: [  405]: REMOTE wants 3.85 line/mm
Jun 07 07:55:24.12: [  405]: REMOTE wants 2-D MR
Jun 07 07:55:25.28: [  405]: --> [7:CONNECT]
Jun 07 07:55:25.28: [  405]: RECV: begin page
Jun 07 07:55:25.28: [  405]: RECV: send trigger 022
Jun 07 07:55:25.28: [  405]: <-- data [1]
Jun 07 07:55:37.90: [  405]: RECV: 5066 bytes of data, 1152 total lines
Jun 07 07:55:37.90: [  405]: --> [16:+FPS:1,47B,0,0,0]
Jun 07 07:55:39.26: [  405]: --> [6:+FET:0]
Jun 07 07:55:39.26: [  405]: RECV recv MPS (more pages, same document)
Jun 07 07:55:39.26: [  405]: --> [2:OK]
Jun 07 07:55:39.26: [  405]: RECV send MCF (message confirmation)
Jun 07 07:55:39.26: [  405]: RECV FAX (00000054): from +49 4151 892599, page 1 in 0:17, INF, 3.85 line/mm, 2-D MR
Jun 07 07:55:39.26: [  405]: <-- [7:AT+FDR\r]
Jun 07 07:55:41.86: [  405]: --> [7:CONNECT]
Jun 07 07:55:41.86: [  405]: RECV: begin page
Jun 07 07:55:41.86: [  405]: RECV: send trigger 022
Jun 07 07:55:41.86: [  405]: <-- data [1]
Jun 07 07:55:54.48: [  405]: RECV: 5065 bytes of data, 1152 total lines
Jun 07 07:55:54.48: [  405]: --> [16:+FPS:1,47B,0,0,0]
Jun 07 07:55:55.83: [  405]: --> [6:+FET:0]
Jun 07 07:55:55.83: [  405]: RECV recv MPS (more pages, same document)
Jun 07 07:55:55.83: [  405]: --> [2:OK]
Jun 07 07:55:55.83: [  405]: RECV send MCF (message confirmation)
Jun 07 07:55:55.83: [  405]: RECV FAX (00000054): from +49 4151 892599, page 2 in 0:16, INF, 3.85 line/mm, 2-D MR
Jun 07 07:55:55.83: [  405]: <-- [7:AT+FDR\r]
Jun 07 07:55:58.43: [  405]: --> [7:CONNECT]
Jun 07 07:55:58.43: [  405]: RECV: begin page
Jun 07 07:55:58.43: [  405]: RECV: send trigger 022
Jun 07 07:55:58.43: [  405]: <-- data [1]
Jun 07 07:56:11.07: [  405]: RECV: 5067 bytes of data, 1154 total lines
Jun 07 07:56:11.07: [  405]: --> [16:+FPS:1,47D,0,0,0]
Jun 07 07:56:12.42: [  405]: --> [6:+FET:0]
Jun 07 07:56:12.42: [  405]: RECV recv MPS (more pages, same document)
Jun 07 07:56:12.42: [  405]: --> [2:OK]
Jun 07 07:56:12.42: [  405]: RECV send MCF (message confirmation)
Jun 07 07:56:12.42: [  405]: RECV FAX (00000054): from +49 4151 892599, page 3 in 0:17, INF, 3.85 line/mm, 2-D MR
Jun 07 07:56:12.42: [  405]: <-- [7:AT+FDR\r]
Jun 07 07:56:15.03: [  405]: --> [7:CONNECT]
Jun 07 07:56:15.03: [  405]: RECV: begin page
Jun 07 07:56:15.03: [  405]: RECV: send trigger 022
Jun 07 07:56:15.03: [  405]: <-- data [1]
Jun 07 07:56:27.72: [  405]: RECV: 5093 bytes of data, 1160 total lines
Jun 07 07:56:27.72: [  405]: --> [16:+FPS:1,483,0,0,0]
Jun 07 07:56:29.07: [  405]: --> [6:+FET:2]
Jun 07 07:56:29.07: [  405]: RECV recv EOP (no more pages or documents)
Jun 07 07:56:29.07: [  405]: --> [2:OK]
Jun 07 07:56:29.07: [  405]: RECV send MCF (message confirmation)
Jun 07 07:56:29.07: [  405]: RECV FAX (00000054): from +49 4151 892599, page 4 in 0:17, INF, 3.85 line/mm, 2-D MR
Jun 07 07:56:29.07: [  405]: RECV FAX (00000054): recvq/fax00013.tif from +49 4151 892599, route to <unspecified>, 4 pages in 1:09
Jun 07 07:56:29.10: [  405]: <-- [7:AT+FDR\r]
Jun 07 07:56:32.00: [  405]: --> [7:+FHS:00]
Jun 07 07:56:32.00: [  405]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jun 07 07:56:32.00: [  405]: RECV FAX: bin/faxrcvd "recvq/fax00013.tif" "modem" "00000054" ""
Jun 07 07:56:32.85: [  405]: RECV FAX: end
Jun 07 07:56:32.85: [  405]: SESSION END