[hylafax-users] faxgetty loop *CVS bug*???

["Jeremy Fowler" <jfowler@westrope.com>]

I installed an rpm created from a tarball of yesterday's CVS tree last night.
Everything seemed to be working fine today until I noticed one of my modems was
caught in a loop. It started at 2:06 and I didn't realize it until 5:10. The log
file was 155820684 bytes long!

Here are *some* ;-) of those logs:

Syslog:
Jun  1 14:00:54 titan FaxGetty[22847]: MODEM USR U.S. Robotics 56K FAX INT Rev.
5.22.16/Configuration Profile... Product type           US/Canada Internal
Product ID:            00561001 Options                V32bis,V.80,V.34+,x2,V.90
Fax Options            Class 1/Class 2.0 Line Options           Caller ID,
Distinctive Ring Clock Freq             92.0Mhz EPROM                  256k RAM
32k FLASH date             7/12/2000 FLASH rev              5.22.16 DSP date
7/12/2000 DSP rev                5.22.16
Jun  1 14:06:20 titan FaxGetty[22847]: ANSWER: FAX CONNECTION
Jun  1 14:06:52 titan FaxGetty[22847]: RECV FAX (00000152): from 270 685 3342,
page 1 in 0:22, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
(That's it from syslog)

Jun 01 14:06:15.10: [22847]: SESSION BEGIN 00000152 18168423081
Jun 01 14:06:15.10: [22847]: <-- [22:AT+FCLASS=1&H1&I0&R2A\r]
Jun 01 14:06:20.78: [22847]: --> [7:CONNECT]
Jun 01 14:06:20.78: [22847]: ANSWER: FAX CONNECTION
Jun 01 14:06:20.78: [22847]: RECV FAX: begin
Jun 01 14:06:20.78: [22847]: <-- data [23]
Jun 01 14:06:20.78: [22847]: <-- data [2]
Jun 01 14:06:20.79: [22847]: --> [7:CONNECT]
Jun 01 14:06:20.79: [22847]: <-- data [10]
Jun 01 14:06:20.79: [22847]: <-- data [2]
Jun 01 14:06:22.77: [22847]: --> [2:OK]
Jun 01 14:06:22.77: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:06:23.78: [22847]: --> [7:CONNECT]
Jun 01 14:06:25.03: [22847]: --> [2:OK]
Jun 01 14:06:25.03: [22847]: REMOTE TSI "270 685 3342"
Jun 01 14:06:25.03: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:06:25.04: [22847]: --> [7:CONNECT]
Jun 01 14:06:25.30: [22847]: --> [2:OK]
Jun 01 14:06:25.30: [22847]: REMOTE wants 14400 bit/s
Jun 01 14:06:25.30: [22847]: REMOTE wants page width 1728 pixels in 215 mm
Jun 01 14:06:25.30: [22847]: REMOTE wants unlimited page length
Jun 01 14:06:25.30: [22847]: REMOTE wants 3.85 line/mm
Jun 01 14:06:25.30: [22847]: REMOTE wants 2-D MR
Jun 01 14:06:25.30: [22847]: RECV training at v.17 14400 bit/s
Jun 01 14:06:25.30: [22847]: <-- [11:AT+FRM=145\r]
Jun 01 14:06:26.99: [22847]: --> [7:CONNECT]
Jun 01 14:06:28.55: [22847]: RECV: TCF 2811 bytes, 2% non-zero, 2291 zero-run
Jun 01 14:06:28.55: [22847]: --> [10:NO CARRIER]
Jun 01 14:06:28.55: [22847]: DELAY 75 ms
Jun 01 14:06:28.63: [22847]: <-- [9:AT+FTH=3\r]
Jun 01 14:06:28.82: [22847]: --> [7:CONNECT]
Jun 01 14:06:28.82: [22847]: <-- data [3]
Jun 01 14:06:28.82: [22847]: <-- data [2]
Jun 01 14:06:30.00: [22847]: --> [2:OK]
Jun 01 14:06:30.00: [22847]: TRAINING succeeded
Jun 01 14:06:30.00: [22847]: <-- [11:AT+FRM=146\r]
Jun 01 14:06:31.02: [22847]: --> [7:CONNECT]
Jun 01 14:06:31.02: [22847]: RECV: begin page
Jun 01 14:06:49.21: [22847]: RECV: 32702 bytes of data, 994 total lines
Jun 01 14:06:50.22: [22847]: RECV: 1654 bytes of data, 1076 total lines
Jun 01 14:06:50.22: [22847]: RECV: end page
Jun 01 14:06:50.22: [22847]: --> [10:NO CARRIER]
Jun 01 14:06:50.22: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:06:50.54: [22847]: --> [7:CONNECT]
Jun 01 14:06:51.32: [22847]: --> [2:OK]
Jun 01 14:06:51.32: [22847]: RECV recv MPS (more pages, same document)
Jun 01 14:06:51.32: [22847]: DELAY 150 ms
Jun 01 14:06:51.47: [22847]: <-- [9:AT+FTH=3\r]
Jun 01 14:06:51.66: [22847]: --> [7:CONNECT]
Jun 01 14:06:51.66: [22847]: <-- data [3]
Jun 01 14:06:51.66: [22847]: <-- data [2]
Jun 01 14:06:52.84: [22847]: --> [2:OK]
Jun 01 14:06:52.84: [22847]: RECV send MCF (message confirmation)
Jun 01 14:06:52.84: [22847]: RECV FAX (00000152): from 270 685 3342, page 1 in
0:22, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Jun 01 14:06:52.84: [22847]: <-- [11:AT+FRM=146\r]
Jun 01 14:06:53.90: [22847]: --> [7:CONNECT]
Jun 01 14:06:53.90: [22847]: RECV: begin page
Jun 01 14:06:54.96: [22847]: RECV: 1823 bytes of data, 41 total lines
Jun 01 14:06:54.96: [22847]: RECV: end page
Jun 01 14:06:54.96: [22847]: --> [10:NO CARRIER]
Jun 01 14:06:54.96: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.34: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.34: [22847]: MODEM No carrier
Jun 01 14:07:19.34: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.35: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.35: [22847]: MODEM No carrier
Jun 01 14:07:19.35: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.36: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.36: [22847]: MODEM No carrier
Jun 01 14:07:19.36: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.37: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.37: [22847]: MODEM No carrier
Jun 01 14:07:19.37: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.38: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.38: [22847]: MODEM No carrier
Jun 01 14:07:19.38: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.39: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.39: [22847]: MODEM No carrier
Jun 01 14:07:19.39: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.40: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.40: [22847]: MODEM No carrier
Jun 01 14:07:19.40: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.41: [22847]: --> [10:NO CARRIER]
Jun 01 14:07:19.41: [22847]: MODEM No carrier
Jun 01 14:07:19.41: [22847]: <-- [9:AT+FRH=3\r]
Jun 01 14:07:19.42: [22847]: --> [10:NO CARRIER]

And it continues on for about 155 more megabytes....

This only happened once today, but luckly I caught it before I went home for the
weekend, else I would have come in to work Monday with a full harddrive!

Any ideas? Maybe I didn't create the rpm correctly. Lee would you mind sending
me yours?

Thanks,
-Jeremy



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null