HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Phase B/C, 50%height



Hello Hylafax List,
 
I am using: : "HylaFAX v4.1beta2-251 under Linux SuSE 7.1 with no gcc and libtiff 3.5.5-93; Dr. Neuhaus (Sagem) Cybermod 28.8 V.34 with LC 28.8 TI  DNT 1175 V.0.00.0680 - D firmware".
 
When sending a fax to a analog fax machine, it is swallowing most of my lines after the 10th line, it is somehow compressing the fax, but only in height. I do also often get a "Communication failure during Phase B/C" with that analog machine.
When sending faxes to a fax2mail provider the fax looks good, received as tiff.
 
When having this Phase B/C failure, I get the following log:
 
Jun 01 10:17:25.35: [  853]: <-- data [1026]
Jun 01 10:17:25.35: [  853]: <-- data [1024]
Jun 01 10:17:25.35: [  853]: <-- data [72]
Jun 01 10:17:25.35: [  853]: SENT 14408 bytes of data
Jun 01 10:17:25.35: [  853]: <-- data [2]
Jun 01 10:17:25.35: [  853]: SEND end page
Jun 01 10:20:25.35: [  853]: MODEM <Timeout>
Jun 01 10:20:25.35: [  853]: <-- [6:AT+FK\r]
Jun 01 10:20:55.35: [  853]: MODEM <Timeout>
Jun 01 10:20:55.35: [  853]: <-- [5:ATH0\r]
Jun 01 10:21:00.35: [  853]: MODEM <Timeout>
Jun 01 10:21:00.35: [  853]: SESSION END
 
Why do I have a timeout?
Where can I change the setup to get full pages (modify the height)?
 
I tried already to fax with high resolution, I changed the speed to 9600 in setup.modem, I tried to do changes in config.ttyS0 but nothing worked.
 
The ps files look good when viewing them, somehow my files get corrupted between ps and faxmachine.
 
Thanks a lot for all efforts, I do not know what to do anymore. I am using a Dr.Neuhaus Cybermod 28.8 V.34 Modem. Is it the modem?
 
Nicolai
 



Project hosted by iFAX Solutions