![]() |
TeijoTykk� wrote: > Normal inboundfax: > > May 15 09:35:09.53: [ 827]: SESSION BEGIN 00000329 3589736020 > May 15 09:35:09.54: [ 827]: <-- [4:ATA\r] > May 15 09:35:20.06: [ 827]: --> [5:+FCON] > May 15 09:35:20.06: [ 827]: ANSWER: FAX CONNECTION > ... and so on > > but sometimes > > May 10 09:37:47.11: [ 827]: SESSION BEGIN 00000301 3589736020 > May 10 09:37:47.12: [ 827]: <-- [4:ATA\r] > May 10 09:37:52.16: [ 827]: --> [10:NO CARRIER] > May 10 09:37:52.16: [ 827]: ANSWER: Ring detected without successful handshake > May 10 09:37:52.16: [ 827]: SESSION END > > what's wrong. My or remote fault? Only sertain senders machines. > > 4.1 beta3 (rpm from hylafax.org) on rh 6.2 > > My config file: > > ModemType: Class2 # use this to supply a hint > ModemRate: 19200 # max rate for DCE-DTE communication > ModemFlowControl: rtscts # XON/XOFF flow control assumed > ModemNoFlowCmd: AT\Q0 # disable flow control cmd > ModemSoftFlowCmd: AT\Q1 # software flow control cmd > ModemHardFlowCmd: AT\Q3 # hardware flow control cmd > ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset > ModemSetupDCDCmd: AT&C1 # DCD follows carrier > ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in Class 2 try AT+FAA=0 ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null