[hylafax-users] fax is truncate!! where the other part goes?

["Alex She<Wizdomtech - Analyst Programmer>" <alexshe@wizdomtech.com>]

 I resetup hylafax-4.1beta-135 on SuSE 6.4, with tiff-3.4-0 and
  libtiff-3.4-final-0  download from
 ftp://ftp.suse.com/pub/suse_update/6.4/
 All the damn problem disapeared. but a new one occured, a fax page is 
 truncated , just a few line of each page is send, the other not, 
 my fax machine is working well.
 tiff problem? 
 libtiff problem? 
 I just have no ideas, every one, help !!
 thanks in advance,,
 good luck!
following is part of /var/log/messages
=================snip=================
Apr 19 09:53:15 htgzln042 HylaFAX[2655]: Filesystem has SysV-style file 
creation semantics.
Apr 19 09:53:15 htgzln042 FaxQueuer[285]: SUBMIT JOB 60
Apr 19 09:53:55 htgzln042 FaxSend[2669]: MODEM CONEXANT AC/K56/V2.300-V90_2M_DLS
Apr 19 09:53:55 htgzln042 FaxSend[2669]: SEND FAX: JOB 42 DEST 11,, COMMID 
00000071
===============snip====================
following is the /var/spool/fax/log/c0000069 
==============begin=================
Apr 19 09:46:41.59: [ 2432]: SESSION BEGIN 00000069 862011
Apr 19 09:46:41.59: [ 2432]: SEND FAX: JOB 40 DEST 11,, COMMID 00000069
Apr 19 09:46:41.59: [ 2432]: DELAY 2600 ms
Apr 19 09:46:44.19: [ 2432]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 19 09:46:44.21: [ 2432]: --> [2:OK]
Apr 19 09:46:44.21: [ 2432]: <-- [12:ATS8=2S7=60\r]
Apr 19 09:46:44.23: [ 2432]: --> [2:OK]
Apr 19 09:46:44.23: [ 2432]: <-- [12:AT+FCLASS=2\r]
Apr 19 09:46:44.25: [ 2432]: --> [2:OK]
Apr 19 09:46:44.25: [ 2432]: <-- [10:AT+FTBC=0\r]
Apr 19 09:46:44.27: [ 2432]: --> [2:OK]
Apr 19 09:46:44.27: [ 2432]: <-- [10:AT+FBOR=0\r]
Apr 19 09:46:44.29: [ 2432]: --> [2:OK]
Apr 19 09:46:44.29: [ 2432]: <-- [13:AT+FPHCTO=30\r]
Apr 19 09:46:44.31: [ 2432]: --> [2:OK]
Apr 19 09:46:44.31: [ 2432]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 19 09:46:44.33: [ 2432]: --> [2:OK]
Apr 19 09:46:44.33: [ 2432]: <-- [7:ATL3M1\r]
Apr 19 09:46:44.34: [ 2432]: --> [2:OK]
Apr 19 09:46:44.34: [ 2432]: <-- [12:AT+FCLASS=2\r]
Apr 19 09:46:44.46: [ 2432]: --> [2:OK]
Apr 19 09:46:44.46: [ 2432]: <-- [10:AT+FTBC=0\r]
Apr 19 09:46:44.58: [ 2432]: --> [2:OK]
Apr 19 09:46:44.58: [ 2432]: <-- [10:AT+FBOR=0\r]
Apr 19 09:46:44.70: [ 2432]: --> [2:OK]
Apr 19 09:46:44.70: [ 2432]: <-- [13:AT+FPHCTO=30\r]
Apr 19 09:46:44.82: [ 2432]: --> [2:OK]
Apr 19 09:46:44.82: [ 2432]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 19 09:46:44.94: [ 2432]: --> [2:OK]
Apr 19 09:46:44.94: [ 2432]: <-- [15:AT+FLID="hyla"\r]
Apr 19 09:46:45.06: [ 2432]: --> [2:OK]
Apr 19 09:46:45.06: [ 2432]: DIAL 11,,
Apr 19 09:46:45.06: [ 2432]: <-- [9:ATDT11,,\r]
Apr 19 09:46:57.15: [ 2432]: --> [5:+FCON]
Apr 19 09:46:59.50: [ 2432]: --> [29:+FCSI: "                  11"]
Apr 19 09:46:59.50: [ 2432]: REMOTE CSI "11"
Apr 19 09:46:59.87: [ 2432]: --> [22:+FDIS: 1,5,0,2,0,0,0,0]
Apr 19 09:46:59.98: [ 2432]: --> [2:OK]
Apr 19 09:46:59.98: [ 2432]: REMOTE best rate 14400 bit/s
Apr 19 09:46:59.98: [ 2432]: REMOTE max page width 1728 pixels in 215 mm
Apr 19 09:46:59.98: [ 2432]: REMOTE max unlimited page length 
Apr 19 09:46:59.98: [ 2432]: REMOTE best vres 7.7 line/mm
Apr 19 09:46:59.98: [ 2432]: REMOTE best format 1-D MR
Apr 19 09:46:59.98: [ 2432]: REMOTE best 0 ms/scanline
Apr 19 09:46:59.98: [ 2432]: USE 14400 bit/s
Apr 19 09:46:59.98: [ 2432]: USE 0 ms/scanline
Apr 19 09:46:59.98: [ 2432]: SEND file "docq/doc43.ps;00"
Apr 19 09:46:59.98: [ 2432]: USE page width 1728 pixels in 215 mm
Apr 19 09:46:59.98: [ 2432]: USE unlimited page length 
Apr 19 09:46:59.98: [ 2432]: USE 3.85 line/mm
Apr 19 09:46:59.98: [ 2432]: USE 1-D MR
Apr 19 09:46:59.98: [ 2432]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
Apr 19 09:47:00.10: [ 2432]: --> [2:OK]
Apr 19 09:47:00.10: [ 2432]: <-- [7:AT+FDT\r]
Apr 19 09:47:07.86: [ 2432]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
Apr 19 09:47:07.86: [ 2432]: --> [7:CONNECT]
Apr 19 09:47:07.86: [ 2432]: SEND wait for XON
Apr 19 09:47:07.86: [ 2432]: --> [1:]
Apr 19 09:47:07.86: [ 2432]: SEND begin page
Apr 19 09:47:07.86: [ 2432]: <-- data [1030]
Apr 19 09:47:07.86: [ 2432]: <-- data [1026]
Apr 19 09:47:07.86: [ 2432]: <-- data [1]
Apr 19 09:47:07.86: [ 2432]: SENT 2049 bytes of data
Apr 19 09:47:07.86: [ 2432]: <-- data [2]
Apr 19 09:47:07.86: [ 2432]: SEND end page
Apr 19 09:47:09.39: [ 2432]: --> [2:OK]
Apr 19 09:47:09.39: [ 2432]: SEND send EOP (no more pages or documents)
Apr 19 09:47:09.39: [ 2432]: <-- [9:AT+FET=2\r]
Apr 19 09:47:12.30: [ 2432]: --> [8:+FPTS: 1]
Apr 19 09:47:12.30: [ 2432]: SEND recv MCF (message confirmation)
Apr 19 09:47:12.30: [ 2432]: SEND FAX (00000069): FROM root@htgzln042.sms.com 
TO 11,, (page 1 of 1 sent in 0:13)
Apr 19 09:47:12.30: [ 2432]: SEND FAX (00000069): FROM root@htgzln042.sms.com 
TO 11,, (docq/doc43.ps;00 sent in 0:13)
Apr 19 09:47:12.30: [ 2432]: <-- [5:ATH0\r]
Apr 19 09:47:13.91: [ 2432]: --> [8:+FHNG: 0]
Apr 19 09:47:13.91: [ 2432]: REMOTE HANGUP: Normal and proper end of connection 
(code 0)
Apr 19 09:47:15.34: [ 2432]: --> [2:OK]
Apr 19 09:47:15.34: [ 2432]: SESSION END
==================end=====================


-------------------------------------------------
This mail sent through IMP: mail.wizdomtech.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null