Re: [hylafax-users] Faxgetty hanging

["Dennis Fellows" <dennis@lamtop.com>]

OK, OK, I'll upgrade like you suggest. :)
This isn't a production machine (yet) so I can make the upgrade without fear
of breaking something.

-Session log -
Apr 12 06:26:18.84: [  944]: SESSION BEGIN 00000047 12626584152
Apr 12 06:26:18.84: [  944]: <-- [4:ATA\r]
Apr 12 06:26:28.71: [  944]: --> [5:+FCON]
Apr 12 06:26:28.71: [  944]: ANSWER: FAX CONNECTION
Apr 12 06:26:28.71: [  944]: RECV FAX: begin
Apr 12 06:26:33.94: [  944]: --> [28:+FTSI:"          6082704422"]
Apr 12 06:26:33.94: [  944]: REMOTE TSI "6082704422"
Apr 12 06:26:33.94: [  944]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Apr 12 06:26:33.94: [  944]: REMOTE wants 14400 bit/s
Apr 12 06:26:33.94: [  944]: REMOTE wants page width 1728 pixels in 215 mm
Apr 12 06:26:33.94: [  944]: REMOTE wants unlimited page length
Apr 12 06:26:33.94: [  944]: REMOTE wants 3.85 line/mm
Apr 12 06:26:33.94: [  944]: REMOTE wants 2-D MR
Apr 12 06:26:33.94: [  944]: --> [2:OK]
Apr 12 06:26:33.94: [  944]: <-- [7:AT+FDR\r]
Apr 12 06:26:35.35: [  944]: --> [5:+FCFR]
Apr 12 06:26:35.35: [  944]: --> [28:+FTSI:"          6082704422"]
Apr 12 06:26:35.35: [  944]: REMOTE TSI "6082704422"
Apr 12 06:26:35.35: [  944]: --> [21:+FDCS:0,5,0,2,1,0,0,3]
Apr 12 06:26:35.35: [  944]: REMOTE wants 14400 bit/s
Apr 12 06:26:35.35: [  944]: REMOTE wants page width 1728 pixels in 215 mm
Apr 12 06:26:35.35: [  944]: REMOTE wants unlimited page length
Apr 12 06:26:35.35: [  944]: REMOTE wants unlimited page length

Apr 12 06:26:35.35: [  944]: REMOTE wants 3.85 line/mm
Apr 12 06:26:35.35: [  944]: REMOTE wants 2-D MR
Apr 12 06:26:36.85: [  944]: --> [7:CONNECT]
Apr 12 06:26:36.85: [  944]: RECV: begin page
Apr 12 06:26:36.85: [  944]: RECV: send trigger 022
Apr 12 06:26:36.85: [  944]: <-- data [1]
Apr 12 06:26:51.90: [  944]: RECV: 25556 bytes of data, 1063 total lines
Apr 12 06:26:51.90: [  944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:26:53.18: [  944]: --> [6:+FET:0]
Apr 12 06:26:53.18: [  944]: RECV recv MPS (more pages, same document)
Apr 12 06:26:53.18: [  944]: --> [2:OK]
Apr 12 06:26:53.18: [  944]: RECV send MCF (message confirmation)
Apr 12 06:26:53.18: [  944]: RECV FAX (00000047): from 6082704422, page 1 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:26:53.18: [  944]: <-- [7:AT+FDR\r]
Apr 12 06:26:56.10: [  944]: --> [7:CONNECT]
Apr 12 06:26:56.10: [  944]: RECV: begin page
Apr 12 06:26:56.10: [  944]: RECV: send trigger 022
Apr 12 06:26:56.10: [  944]: <-- data [1]
Apr 12 06:27:11.15: [  944]: RECV: 25567 bytes of data, 1058 total lines
Apr 12 06:27:11.15: [  944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:27:12.43: [  944]: --> [6:+FET:0]
Apr 12 06:27:12.43: [  944]: --> [6:+FET:0]
Apr 12 06:27:12.43: [  944]: RECV recv MPS (more pages, same document)
Apr 12 06:27:12.43: [  944]: --> [2:OK]

Apr 12 06:27:12.43: [  944]: RECV send MCF (message confirmation)
Apr 12 06:27:12.43: [  944]: RECV FAX (00000047): from 6082704422, page 2 in
0:1
9, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:12.43: [  944]: <-- [7:AT+FDR\r]
Apr 12 06:27:15.33: [  944]: --> [7:CONNECT]
Apr 12 06:27:15.33: [  944]: RECV: begin page
Apr 12 06:27:15.33: [  944]: RECV: send trigger 022
Apr 12 06:27:15.33: [  944]: <-- data [1]
Apr 12 06:27:31.23: [  944]: RECV: 27103 bytes of data, 1064 total lines
Apr 12 06:27:31.23: [  944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:27:32.52: [  944]: --> [6:+FET:0]
Apr 12 06:27:32.52: [  944]: RECV recv MPS (more pages, same document)
Apr 12 06:27:32.52: [  944]: --> [2:OK]
Apr 12 06:27:32.52: [  944]: RECV send MCF (message confirmation)
Apr 12 06:27:32.52: [  944]: RECV FAX (00000047): from 6082704422, page 3 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:32.52: [  944]: <-- [7:AT+FDR\r]
Apr 12 06:27:35.44: [  944]: --> [7:CONNECT]
Apr 12 06:27:35.44: [  944]: RECV: begin page
Apr 12 06:27:35.44: [  944]: RECV: send trigger 022
Apr 12 06:27:32.52: [  944]: --> [2:OK]
Apr 12 06:27:32.52: [  944]: RECV send MCF (message confirmation)
Apr 12 06:27:32.52: [  944]: RECV FAX (00000047): from 6082704422, page 3 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:32.52: [  944]: <-- [7:AT+FDR\r]

Apr 12 06:27:35.44: [  944]: --> [7:CONNECT]
Apr 12 06:27:35.44: [  944]: RECV: begin page
Apr 12 06:27:35.44: [  944]: RECV: send trigger 022
Apr 12 06:27:35.44: [  944]: <-- data [1]
Apr 12 06:27:51.46: [  944]: RECV: 28573 bytes of data, 1064 total lines
Apr 12 06:27:51.46: [  944]: --> [15:+FPTS:1,0,0,0,0]
Apr 12 06:27:52.84: [  944]: --> [6:+FET:0]
Apr 12 06:27:52.84: [  944]: RECV recv MPS (more pages, same document)
Apr 12 06:27:52.84: [  944]: --> [2:OK]
Apr 12 06:27:52.84: [  944]: RECV send MCF (message confirmation)
Apr 12 06:27:52.84: [  944]: RECV FAX (00000047): from 6082704422, page 4 in
0:2
0, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Apr 12 06:27:52.84: [  944]: <-- [7:AT+FDR\r]
Apr 12 06:27:55.76: [  944]: --> [7:CONNECT]
Apr 12 06:27:55.76: [  944]: RECV: begin page
Apr 12 06:27:55.76: [  944]: RECV: send trigger 022
Apr 12 06:27:55.76: [  944]: <-- data [1]
Apr 12 07:49:19.61: [  944]: CLOSE /dev/ttyR0

After killing the faxgetty it sent the last line (note the time!!!)
Here's the config file for that line (beginning snipped)
[SNIP]
CountryCode:            1
AreaCode:               262
FAXNumber:              1.262.658.4152
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Laminated Products x4152"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           250
#
#
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           250
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              57600           # lock rate for DCE-DTE
communication
ModemFlowControl:       rtscts          # default
#
ModemHardFlowCmd:       AT&E4           # hardware flow control
ModemSoftFlowCmd:       AT&E5           # software flow control
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
#
# NB: some models get confused by the @
#
ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for silence
#
Class2RecvDataTrigger:  "\022"          # character sent to modem to start
recv
Class2CQQueryCmd:       "!(0),(0)"      # Enable Quality Check by DF

The CQQuery command was NOT in use at the time of the error

Thanks




----- Original Message -----
From: "Lee Howard" <faxguy@deanox.com>
To: "Dennis Fellows" <dennis@lamtop.com>; <hylafax-users@hylafax.org>
Sent: Thursday, April 12, 2001 10:56 AM
Subject: Re: [hylafax-users] Faxgetty hanging


> At 10:43 AM 4/12/01 -0500, Dennis Fellows wrote:
> >I just experienced a problem where an incoming fax mysteriously stops.
> >Faxstat reports that it's still receiving and the log for that fax
doesn't
> >show any errors but also doesn't show any normal end of comms. It's as
> >though the log is left open with the line and faxgetty is waiting forever
> >for the fax to continue.
> >
> >I reported a similar error a week ago but received no response because I
was
> >using libtiff 3.4  with hylafax4.1beta2. I've now re-updated to
> >libtiff3.5.5-7.
>
> You're still using 4.1beta2 I suppose?  A glimpse at
> http://www.hylafax.org/4.1beta3.php should be convincing enough to
> upgrade, I would think.
>
> >I will send the log and modemconfig if you wish but is there a timeout
that
> >I can set for an incoming fax. When I did a "ps ax | grep fax", the
faxgetty
> >controlling the line showed it had been running for over 80mins.
>
> Logs would help.
>
> Lee.
>
>
>
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null