HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Some error messages



On more thing:

I takes quite a lot time to finish one page and to start the next one. Is
it properly working, or not? If not, what to do?

...
Mar 29 21:40:08.04: [15938]: <-- data [1056]
Mar 29 21:40:09.24: [15938]: <-- data [1051]
Mar 29 21:40:09.69: [15938]: <-- data [1042]
Mar 29 21:40:10.15: [15938]: <-- data [1043]
Mar 29 21:40:11.41: [15938]: <-- data [1030]
Mar 29 21:40:11.86: [15938]: <-- data [1050]
Mar 29 21:40:12.31: [15938]: <-- data [1024]
Mar 29 21:40:13.52: [15938]: <-- data [1024]
Mar 29 21:40:13.98: [15938]: <-- data [349]
Mar 29 21:40:14.46: [15938]: SENT 39261 bytes of data
Mar 29 21:40:14.46: [15938]: <-- data [2]
Mar 29 21:40:14.46: [15938]: MODEM set XON/XOFF/DRAIN: input interpreted,
output generated
Mar 29 21:40:21.05: [15938]: SEND end page
Mar 29 21:40:24.37: [15938]: --> [2:OK]
Mar 29 21:40:24.37: [15938]: SEND send MPS (more pages, same document)
Mar 29 21:40:24.37: [15938]: <-- [9:AT+FET=0\r]
Mar 29 21:40:27.20: [15938]: --> [8:+FPTS: 1]
Mar 29 21:40:27.20: [15938]: --> [2:OK]
Mar 29 21:40:27.20: [15938]: SEND recv MCF (message confirmation)
Mar 29 21:40:27.20: [15938]: SEND FAX (00000004): FROM jeneyg@hit.bme.hu
TO 3263 (page 1 of 2 sent in 0:49)
Mar 29 21:40:27.20: [15938]: SEND FAX (00000004): FROM jeneyg@hit.bme.hu
TO 3263 (docq/doc2.cover;01 sent in 0:49)
Mar 29 21:40:27.20: [15938]: SEND file "docq/doc2.ps;01"
Mar 29 21:40:27.20: [15938]: USE page width 1728 pixels in 215 mm
Mar 29 21:40:27.20: [15938]: USE unlimited page length 
Mar 29 21:40:27.20: [15938]: USE 7.7 line/mm
Mar 29 21:40:27.20: [15938]: USE 1-D MR
Mar 29 21:40:27.20: [15938]: MODEM set XON/XOFF/NOW: input ignored, output
generated
Mar 29 21:40:27.20: [15938]: <-- [7:AT+FDT\r]
Mar 29 21:40:28.05: [15938]: --> [7:CONNECT]
Mar 29 21:40:28.05: [15938]: SEND wait for XON
Mar 29 21:40:28.05: [15938]: --> [1:^Q]
Mar 29 21:40:28.05: [15938]: MODEM set XON/XOFF/NOW: input interpreted,
output generated
Mar 29 21:40:28.05: [15938]: SEND begin page
Mar 29 21:40:28.05: [15938]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Mar 29 21:40:28.05: [15938]: <-- data [1025]
Mar 29 21:40:28.05: [15938]: <-- data [1028]
Mar 29 21:40:28.05: [15938]: <-- data [1038]
Mar 29 21:40:28.05: [15938]: <-- data [1032]
Mar 29 21:40:28.74: [15938]: <-- data [1031]
Mar 29 21:40:28.74: [15938]: <-- data [1037]
Mar 29 21:40:30.26: [15938]: <-- data [1035]
Mar 29 21:40:31.39: [15938]: <-- data [1027]
Mar 29 21:40:31.85: [15938]: <-- data [1026]
...

Thanx.

Best regards,
				Gábor Jeney

----------- Gabor Jeney PhD. student ----------
Budapest University of Technology and Economics
Dep. of Telecommunications -- Mobile Comm. Lab.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions