[hylafax-users] Local fax cannot send by HylaFax

["Falco Fan" <falco@primeasia.com.hk>]

Hi,

 

I have setup a Fax Server by RedHat 6.2 and HylaFax 4.1beta2, client side is using WHFC, now it is in the testing phase.  A user report that he cannot send a local fax, the following is the content of the mail notification.

 

When using faxstat -a, the status of TTS is display as "No response to MPS repeat".  But when I using a normal fax machine to fax to this destination, no problem is detected.

 

Can anybody tell me how to solve this problem.

 

Thanks

 

Falco

 

 

> Your facsimile job to xxxx xxxx was not sent because:
>     No response to MPS repeated 3 times
>
> The job will be retried at 15:34.
>
>     ---- Transcript of session follows ----
>
> Mar 26 15:27:56.22: [ 2877]: SESSION BEGIN 00000136 852xxxxxxxx
> Mar 26 15:27:56.22: [ 2877]: SEND FAX: JOB 80 DEST xxxx xxxx COMMID 00000136
> Mar 26 15:27:56.23: [ 2877]: DELAY 2600 ms
> Mar 26 15:27:58.82: [ 2877]: <-- [4:ATZ\r]
> Mar 26 15:27:58.95: [ 2877]: --> [2:OK]
> Mar 26 15:27:58.95: [ 2877]: <-- [17:ATE0V1Q0X4S0=0H0\r]
> Mar 26 15:27:59.09: [ 2877]: --> [16:ATE0V1Q0X4S0=0H0]
> Mar 26 15:27:59.09: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.09: [ 2877]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
> Mar 26 15:27:59.23: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.23: [ 2877]: <-- [14:AT+FCLASS=2.0\r]
> Mar 26 15:27:59.37: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.37: [ 2877]: <-- [9:AT+FLO=2\r]
> Mar 26 15:27:59.51: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.51: [ 2877]: <-- [9:AT+FPP=0\r]
> Mar 26 15:27:59.65: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.65: [ 2877]: <-- [9:AT+FBO=0\r]
> Mar 26 15:27:59.79: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.79: [ 2877]: <-- [10:AT+FCT=30\r]
> Mar 26 15:27:59.93: [ 2877]: --> [2:OK]
> Mar 26 15:27:59.93: [ 2877]: <-- [15:AT+FNR=1,1,1,0\r]
> Mar 26 15:28:00.07: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.07: [ 2877]: <-- [9:AT+FIE=0\r]
> Mar 26 15:28:00.21: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.21: [ 2877]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Mar 26 15:28:00.35: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.35: [ 2877]: <-- [5:ATM1\r]
> Mar 26 15:28:00.48: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.48: [ 2877]: <-- [14:AT+FCLASS=2.0\r]
> Mar 26 15:28:00.72: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.72: [ 2877]: <-- [9:AT+FLO=2\r]
> Mar 26 15:28:00.96: [ 2877]: --> [2:OK]
> Mar 26 15:28:00.96: [ 2877]: <-- [9:AT+FPP=0\r]
> Mar 26 15:28:01.20: [ 2877]: --> [2:OK]
> Mar 26 15:28:01.20: [ 2877]: <-- [9:AT+FBO=0\r]
> Mar 26 15:28:01.44: [ 2877]: --> [2:OK]
> Mar 26 15:28:01.44: [ 2877]: <-- [10:AT+FCT=30\r]
> Mar 26 15:28:01.68: [ 2877]: --> [2:OK]
> Mar 26 15:28:01.68: [ 2877]: <-- [15:AT+FNR=1,1,1,0\r]
> Mar 26 15:28:01.92: [ 2877]: --> [2:OK]
> Mar 26 15:28:01.92: [ 2877]: <-- [9:AT+FIE=0\r]
> Mar 26 15:28:02.16: [ 2877]: --> [2:OK]
> Mar 26 15:28:02.16: [ 2877]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Mar 26 15:28:02.40: [ 2877]: --> [2:OK]
> Mar 26 15:28:02.40: [ 2877]: <-- [22:AT+FLI="+852yyyyyyyy"\r]
> Mar 26 15:28:02.64: [ 2877]: --> [2:OK]
> Mar 26 15:28:02.64: [ 2877]: DIAL xxxx xxxx

> Mar 26 15:28:02.64: [ 2877]: <-- [13:ATDTxxxxxxxx\r]
> Mar 26 15:28:34.00: [ 2877]: --> [4:+FCO]
> Mar 26 15:28:37.19: [ 2877]: --> [27:+FCI:"      +852 xxxx xxxx"]
> Mar 26 15:28:37.19: [ 2877]: REMOTE CSI "+852 xxxx xxxx"
> Mar 26 15:28:37.19: [ 2877]: --> [20:+FIS:1,3,0,2,1,0,0,4]
> Mar 26 15:28:37.19: [ 2877]: --> [2:OK]
> Mar 26 15:28:37.19: [ 2877]: REMOTE best rate 9600 bit/s
> Mar 26 15:28:37.19: [ 2877]: REMOTE max page width 1728 pixels in 215 mm
> Mar 26 15:28:37.19: [ 2877]: REMOTE max unlimited page length
> Mar 26 15:28:37.19: [ 2877]: REMOTE best vres 7.7 line/mm
> Mar 26 15:28:37.19: [ 2877]: REMOTE best format 2-D MR
> Mar 26 15:28:37.19: [ 2877]: REMOTE best 20 ms, 10 ms/scanline
> Mar 26 15:28:37.19: [ 2877]: USE 9600 bit/s
> Mar 26 15:28:37.19: [ 2877]: USE 20 ms, 10 ms/scanline
> Mar 26 15:28:37.19: [ 2877]: SEND file "docq/doc80.cover;01"
> Mar 26 15:28:37.19: [ 2877]: USE page width 1728 pixels in 215 mm
> Mar 26 15:28:37.19: [ 2877]: USE unlimited page length
> Mar 26 15:28:37.19: [ 2877]: USE 7.7 line/mm
> Mar 26 15:28:37.19: [ 2877]: USE 1-D MR
> Mar 26 15:28:37.19: [ 2877]: <-- [23:AT+FIS=1,3,0,2,0,0,0,4\r]
> Mar 26 15:28:37.43: [ 2877]: --> [2:OK]
> Mar 26 15:28:37.43: [ 2877]: <-- [7:AT+FDT\r]
> Mar 26 15:28:37.70: [ 2877]: --> [20:+FCS:1,3,0,2,0,0,0,4]
> Mar 26 15:28:43.28: [ 2877]: --> [7:CONNECT]
> Mar 26 15:28:43.28: [ 2877]: SEND begin page
> Mar 26 15:28:51.39: [ 2877]: SENT 13856 bytes of data
> Mar 26 15:28:51.39: [ 2877]: SEND 1D RTC
> Mar 26 15:28:51.39: [ 2877]: SEND end page
> Mar 26 15:28:51.39: [ 2877]: SEND send MPS (more pages, same document)
> Mar 26 15:29:09.93: [ 2877]: --> [7:+FHS:52]
> Mar 26 15:29:09.93: [ 2877]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
> Mar 26 15:29:09.93: [ 2877]: <-- [5:ATH0\r]
> Mar 26 15:29:10.05: [ 2877]: --> [2:OK]
> Mar 26 15:29:10.05: [ 2877]: SESSION END