[hylafax-users] Courier V.Everything

[qbop <cubop@tin.it>]

I've the following problem with a 3com Courier V.Everything. When I send a fax it is transmitted completely but at the 
end the line gets closed (don't know if is my modem or the remote fax machine) and after 3 minutes hylafax return an 
error. I hope someone can explain me what's the matter..

Here's the log:

mar 17 12:30:05.33: [13254]: SESSION BEGIN 00025673 039xxxxxxxxxxxxx
mar 17 12:30:05.33: [13254]: SEND FAX: JOB 6548 DEST xxxxxxxxxxxx COMMID 00025673
mar 17 12:30:05.33: [13254]: DELAY 2600 ms
mar 17 12:30:07.93: [13254]: DELAY 500 ms
mar 17 12:30:08.43: [13254]: <-- [4:ATZ\r]
mar 17 12:30:09.40: [13254]: --> [3:ATZ]
mar 17 12:30:09.40: [13254]: --> [2:OK]
mar 17 12:30:09.40: [13254]: DELAY 500 ms
mar 17 12:30:09.90: [13254]: <-- [15:ATE0V1Q0S0=0H0\r]
mar 17 12:30:10.07: [13254]: --> [14:ATE0V1Q0S0=0H0]
mar 17 12:30:10.07: [13254]: --> [2:OK]
mar 17 12:30:10.07: [13254]: DELAY 500 ms
mar 17 12:30:10.57: [13254]: <-- [18:ATS8=2S7=60&D2&C1\r]
mar 17 12:30:10.74: [13254]: --> [2:OK]
mar 17 12:30:10.74: [13254]: DELAY 500 ms
mar 17 12:30:11.24: [13254]: <-- [14:AT+FCLASS=2.0\r]
mar 17 12:30:11.28: [13254]: --> [2:OK]
mar 17 12:30:11.28: [13254]: DELAY 500 ms
mar 17 12:30:11.78: [13254]: <-- [9:AT+FLO=2\r]
mar 17 12:30:11.82: [13254]: --> [2:OK]
mar 17 12:30:11.82: [13254]: DELAY 500 ms
mar 17 12:30:12.32: [13254]: <-- [9:AT+FPP=0\r]
mar 17 12:30:12.36: [13254]: --> [2:OK]
mar 17 12:30:12.36: [13254]: DELAY 500 ms
mar 17 12:30:12.86: [13254]: <-- [9:AT+FBO=0\r]
mar 17 12:30:12.90: [13254]: --> [2:OK]
mar 17 12:30:12.90: [13254]: DELAY 500 ms
mar 17 12:30:13.40: [13254]: <-- [10:AT+FCT=30\r]
mar 17 12:30:13.44: [13254]: --> [2:OK]
mar 17 12:30:13.44: [13254]: DELAY 500 ms
mar 17 12:30:13.94: [13254]: <-- [15:AT+FNR=1,1,1,1\r]
mar 17 12:30:13.98: [13254]: --> [2:OK]
mar 17 12:30:13.98: [13254]: DELAY 500 ms
mar 17 12:30:14.48: [13254]: <-- [9:AT+FIE=0\r]
mar 17 12:30:14.52: [13254]: --> [2:OK]
mar 17 12:30:14.52: [13254]: DELAY 500 ms
mar 17 12:30:15.02: [13254]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
mar 17 12:30:15.06: [13254]: --> [2:OK]
mar 17 12:30:15.06: [13254]: DELAY 500 ms
mar 17 12:30:15.56: [13254]: <-- [5:ATM0\r]
mar 17 12:30:15.73: [13254]: --> [2:OK]
mar 17 12:30:15.73: [13254]: DELAY 500 ms
mar 17 12:30:16.23: [13254]: <-- [14:AT+FCLASS=2.0\r]
mar 17 12:30:16.37: [13254]: --> [2:OK]
mar 17 12:30:16.37: [13254]: DELAY 500 ms
mar 17 12:30:16.87: [13254]: <-- [9:AT+FLO=2\r]
mar 17 12:30:17.04: [13254]: --> [2:OK]
mar 17 12:30:17.04: [13254]: DELAY 500 ms
mar 17 12:30:17.54: [13254]: <-- [9:AT+FPP=0\r]
mar 17 12:30:17.68: [13254]: --> [2:OK]
mar 17 12:30:17.68: [13254]: DELAY 500 ms
mar 17 12:30:18.18: [13254]: <-- [9:AT+FBO=0\r]
mar 17 12:30:18.32: [13254]: --> [2:OK]
mar 17 12:30:18.32: [13254]: DELAY 500 ms
mar 17 12:30:18.82: [13254]: <-- [10:AT+FCT=30\r]
mar 17 12:30:18.96: [13254]: --> [2:OK]
mar 17 12:30:18.96: [13254]: DELAY 500 ms
mar 17 12:30:19.46: [13254]: <-- [15:AT+FNR=1,1,1,1\r]
mar 17 12:30:19.60: [13254]: --> [2:OK]
mar 17 12:30:19.60: [13254]: DELAY 500 ms
mar 17 12:30:20.10: [13254]: <-- [9:AT+FIE=0\r]
mar 17 12:30:20.24: [13254]: --> [2:OK]
mar 17 12:30:20.24: [13254]: DELAY 500 ms
mar 17 12:30:20.74: [13254]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
mar 17 12:30:20.89: [13254]: --> [2:OK]
mar 17 12:30:20.89: [13254]: DELAY 500 ms
mar 17 12:30:21.39: [13254]: <-- [24:AT+FLI="yyyyyyyyyyy"\r]
mar 17 12:30:21.54: [13254]: --> [2:OK]
mar 17 12:30:21.54: [13254]: DIAL 0,xxxxxxxxxxxxx
mar 17 12:30:21.54: [13254]: DELAY 500 ms
mar 17 12:30:22.04: [13254]: <-- [17:ATDT0,xxxxxxxxxxx\r]
mar 17 12:30:44.85: [13254]: --> [4:+FCO]
mar 17 12:30:46.69: [13254]: --> [57:+FNF:5901022020202020202020202020202020202020202020CC000B]
mar 17 12:30:46.69: [13254]: REMOTE NSF "5901022020202020202020202020202020202020202020CC000B"
mar 17 12:30:46.69: [13254]: NSF remote fax equipment: unknown 
mar 17 12:30:47.38: [13254]: --> [27:+FCI:"                    "]
mar 17 12:30:47.38: [13254]: REMOTE CSI ""
mar 17 12:30:47.73: [13254]: --> [20:+FIS:1,3,0,2,1,0,0,3]
mar 17 12:30:47.73: [13254]: --> [2:OK]
mar 17 12:30:47.73: [13254]: REMOTE best rate 9600 bit/s
mar 17 12:30:47.73: [13254]: REMOTE max page width 1728 pixels in 215 mm
mar 17 12:30:47.73: [13254]: REMOTE max unlimited page length 
mar 17 12:30:47.73: [13254]: REMOTE best vres 7.7 line/mm
mar 17 12:30:47.73: [13254]: REMOTE best format 2-D MR
mar 17 12:30:47.73: [13254]: REMOTE best 10 ms/scanline
mar 17 12:30:47.73: [13254]: USE 9600 bit/s
mar 17 12:30:47.73: [13254]: USE 10 ms/scanline
mar 17 12:30:47.73: [13254]: SEND file "docq/doc6666.ps;31"
mar 17 12:30:47.73: [13254]: USE page width 1728 pixels in 215 mm
mar 17 12:30:47.73: [13254]: USE unlimited page length 
mar 17 12:30:47.73: [13254]: USE 7.7 line/mm
mar 17 12:30:47.73: [13254]: USE 1-D MR
mar 17 12:30:47.73: [13254]: DELAY 500 ms
mar 17 12:30:48.23: [13254]: <-- [23:AT+FIS=1,3,0,2,0,0,0,3\r]
mar 17 12:30:48.38: [13254]: --> [2:OK]
mar 17 12:30:48.38: [13254]: DELAY 500 ms
mar 17 12:30:48.88: [13254]: <-- [7:AT+FDT\r]
mar 17 12:30:49.02: [13254]: --> [20:+FCS:1,3,0,2,0,0,0,3]
mar 17 12:30:54.84: [13254]: --> [7:CONNECT]
mar 17 12:30:54.84: [13254]: SEND begin page
mar 17 12:30:54.84: [13254]: <-- data [1028]
mar 17 12:30:54.84: [13254]: <-- data [1029]
mar 17 12:30:54.84: [13254]: <-- data [1030]
mar 17 12:30:54.84: [13254]: <-- data [1031]
mar 17 12:30:55.83: [13254]: <-- data [1032]
mar 17 12:30:55.84: [13254]: <-- data [850]
mar 17 12:30:55.84: [13254]: SENT 5965 bytes of data
mar 17 12:30:55.84: [13254]: SEND end page
mar 17 12:30:55.84: [13254]: SEND send EOP (no more pages or documents)
mar 17 12:30:55.84: [13254]: <-- data [2]
mar 17 12:33:55.84: [13254]: REMOTE HANGUP: Unspecified Transmit Phase D error, including +FPHCTO timeout 
between data and +FET command (code 50)
mar 17 12:33:55.84: [13254]: DELAY 500 ms
mar 17 12:33:56.34: [13254]: <-- [7:AT+FKS\r]
mar 17 12:33:56.48: [13254]: --> [2:OK]
mar 17 12:33:56.48: [13254]: DELAY 500 ms
mar 17 12:33:56.98: [13254]: <-- [5:ATH0\r]
mar 17 12:33:57.25: [13254]: --> [2:OK]
mar 17 12:33:57.25: [13254]: SESSION END

and this is the core of the modem configuration:
[...]
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class2.0	# use this to supply a hint
#ModemRate:		19200		# max rate for DCE-DTE communication
#ModemFlowControl:	xonxoff		# XON/XOFF flow control assumed
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemAtCmdDelay:	500
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd:		ATDT%s@		# T for tone dialing, @ for silence
#
# Other possible configuration stuff.  The default strings are
# shown below.  Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds:		""		# stuff to do when modem is reset
#ModemAnswerCmd:		ATA		# use this to answer phone
#ModemNoFlowCmd:		AT&K		# disable flow control cmd
#ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
#ModemSoftFlowCmd:	AT&K4		# software flow control cmd
#ModemNoAutoAnswerCmd:	ATS0=0		# disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd:	"ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd:	ATE0		# disable command echo
#ModemVerboseResultsCmd:	ATV1		# enable verbose command results
#ModemResultCodesCmd:	ATQ0		# enable result codes
#ModemOnHookCmd:		ATH0		# place phone on hook (hangup)
#ModemSoftResetCmd:	ATZ		# do soft reset of modem
#ModemWaitTimeCmd:	ATS7=60		# wait 60 seconds for carrier
#ModemCommaPauseTimeCmd:	ATS8=2		# comma pause time is 2 seconds
#ModemRecvFillOrder:	LSB2MSB		# bit order of received facsimile
#ModemSendFillOrder:	LSB2MSB		# bit order modem expects for transmit
#
# Configuration parameters for Class 2.0 modems.
#
Class2Cmd:		AT+FCLASS=2.0	# command to enter class 2.0
Class2BORCmd:		AT+FBO=0	# bit order for phase B/C/D (direct)
Class2CQCmd:		""		# commands to enable copy quality proc.
Class2AbortCmd:		AT+FKS		# abort session command
Class2CQQueryCmd:	AT+FCQ=?	# query for copy quality capabilities
Class2DCCQueryCmd:	AT+FCC=?	# query for modem capabilities
Class2TBCCmd:		AT+FPP=0	# setup stream mode
Class2CRCmd:		AT+FCR=1	# enable capability to receive
Class2PHCTOCmd:		AT+FCT=30	# set phase C timeout parameter
#Class2BUGCmd:		AT+FBU=1	# enable HDLC frame tracing
Class2BUGCmd:		AT+FBU=0	# enable HDLC frame tracing
Class2LIDCmd:		AT+FLI		# set local identifier command
Class2DCCCmd:		AT+FCC		# set modem capabilities command
Class2DISCmd:		AT+FIS		# set session parameters command
Class2DDISCmd:		""		# disable pre-dial DIS command hack
Class2CIGCmd:		AT+FPI		# set polling identifier command
Class2NRCmd:		AT+FNR=1,1,1,1	# setup status reporting command
Class2PIECmd:		AT+FIE=0	# disable interrupt-enable command
Class2PTSCmd:		AT+FPS		# set post-page status command
Class2SPLCmd:		AT+FSP		# set polling indicator command
Class2NFLOCmd:		AT+FLO=0	# set no flow control command
Class2SFLOCmd:		AT+FLO=1	# set software flow control command
Class2HFLOCmd:		AT+FLO=2	# set hardware flow control command

The system is : Hylafax 4.1beta2 on RedHat Linux 6.1 (with libtiff-3.5.5-2 ghostscript-(fonts-)5.50-1)
from rpm package 4.1beta2-8rh6.

Thanks
massimo




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null