[hylafax-users] Problems receiving faxes continued.

["Russell P. Sutherland" <russ@quist.ca>]

I modified the logging flags. Here are the error messages
when receiving.

Mar 06 15:43:31.28: [20990]: SESSION BEGIN 00000058 14169225071
Mar 06 15:43:31.28: [20990]: <-- [4:ATA\r]
Mar 06 15:43:42.22: [20990]: --> [5:+FCON]
Mar 06 15:43:42.22: [20990]: ANSWER: FAX CONNECTION
Mar 06 15:43:42.22: [20990]: STATE CHANGE: ANSWERING -> RECEIVING
Mar 06 15:43:42.22: [20990]: MODEM input buffering enabled
Mar 06 15:43:42.22: [20990]: RECV FAX: begin
Mar 06 15:43:42.23: [20990]: --> [28:+FTSI:"        +14169783787"]
Mar 06 15:43:42.23: [20990]: REMOTE TSI "+14169783787"
Mar 06 15:43:42.57: [20990]: --> [21:+FDCS:1,5,0,2,0,0,0,0]
Mar 06 15:43:42.57: [20990]: REMOTE wants 14400 bit/s
Mar 06 15:43:42.57: [20990]: REMOTE wants page width 1728 pixels in 215 mm
Mar 06 15:43:42.57: [20990]: REMOTE wants unlimited page length 
Mar 06 15:43:42.57: [20990]: REMOTE wants 7.7 line/mm
Mar 06 15:43:42.57: [20990]: REMOTE wants 1-D MR
Mar 06 15:43:42.57: [20990]: --> [2:OK]
Mar 06 15:43:42.57: [20990]: <-- [7:AT+FDR\r]
Mar 06 15:43:46.57: [20990]: --> [5:+FCFR]
Mar 06 15:43:48.13: [20990]: --> [7:CONNECT]
Mar 06 15:43:48.13: [20990]: RECV: begin page
Mar 06 15:43:48.13: [20990]: RECV: send trigger 022
Mar 06 15:43:48.13: [20990]: <-- data [1]
Mar 06 15:43:49.07: [20990]: RECV/CQ: Bad 1D pixel count, row 0, got 162, expected 1728
Mar 06 15:44:05.67: [20990]: RECV/CQ: Invalid BlackTable code word, row 1415, x 1717
Mar 06 15:44:05.67: [20990]: RECV/CQ: Bad 1D pixel count, row 1415, got 1717, expected 1728
Mar 06 15:44:05.67: [20990]: RECV: 28688 bytes of data, 1416 total lines
Mar 06 15:44:05.67: [20990]: --> [12:+FPTS:1,1499]
Mar 06 15:44:06.92: [20990]: --> [6:+FET:2]
Mar 06 15:44:06.92: [20990]: RECV recv EOP (no more pages or documents)
Mar 06 15:44:06.92: [20990]: --> [2:OK]
Mar 06 15:44:06.92: [20990]: RECV send MCF (message confirmation)
Mar 06 15:44:06.92: [20990]: RECV FAX (00000058): from +14169783787, page 1 in 0:24, INF, 7.7 line/mm, 1-D MR, 14400 bit/s
Mar 06 15:44:06.93: [20990]: RECV FAX (00000058): recvq/fax00005.tif from +14169783787, route to <unspecified>, 1 pages in 0:24
Mar 06 15:44:06.93: [20990]: <-- [7:AT+FDR\r]
Mar 06 15:44:09.48: [20990]: --> [7:+FHNG:0]
Mar 06 15:44:09.48: [20990]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Mar 06 15:44:09.48: [20990]: RECV FAX: bin/faxrcvd "recvq/fax00005.tif" "ttyS3" "00000058" ""
Mar 06 15:44:09.71: [20990]: RECV FAX: end
Mar 06 15:44:09.71: [20990]: SESSION END

Once again I'm using a Multitech internal modem:

	LT V.90 1.0 MT5634ZPX Internal Data/Fax/Voice Modem Version 8.18j

On an Intel machine, running RH 6.2 and Hylafax 4.1beta3.

-- 
Quist Consulting		Email: russ@quist.ca
219 Donlea Drive 		Voice: +1.416.696.7600
Toronto ON  M4G 2N1		Fax:   +1.416.978.6620
CANADA				WWW:   http://www.quist.ca


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null