 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Very Very Desperate Newbie
- To: "hylafax-users@hylafax.org" <hylafax-users@hylafax.org>
- Subject: [hylafax-users] Very Very Desperate Newbie
- From: Ken Cole <ken@satsof.com.au>
- Reply-To: ken@satsof.com.au
- Date: Tue, 06 Mar 2001 21:34:17 +1000
I asked this question two days ago and got one answer ensuring I had used the correct version for Redhat 6.2, which I have. I have gone back over the doco, troubleshooting, etc and cannot find an answer to my problems. I really want to use HylaFAX but cannot if I cannot get it working. It seems 90% there. Reiterating: Redhat 6.2 hylafax-4.1beta3-1rh6 hylafax-htmldoc-4.1beta3-1rh6 log details are: Mar 06 20:55:12.18: [21777]: SESSION BEGIN 00000024 61738030216 Mar 06 20:55:12.19: [21777]: SEND FAX: JOB 16 DEST 38030216 COMMID 00000024 Mar 06 20:55:12.19: [21777]: DELAY 2600 ms Mar 06 20:55:14.78: [21777]: <-- [4:ATZ\r] Mar 06 20:55:14.91: [21777]: --> [2:OK] Mar 06 20:55:14.91: [21777]: <-- [15:ATE0V1Q0S0=0H0\r] Mar 06 20:55:14.93: [21777]: --> [14:ATE0V1Q0S0=0H0] Mar 06 20:55:14.93: [21777]: --> [2:OK] Mar 06 20:55:14.93: [21777]: <-- [21:ATS8=2S7=60&K3&D3&C1\r] Mar 06 20:55:14.95: [21777]: --> [2:OK] Mar 06 20:55:14.95: [21777]: <-- [12:AT+FCLASS=2\r] Mar 06 20:55:14.97: [21777]: --> [2:OK] Mar 06 20:55:14.97: [21777]: <-- [10:AT+FTBC=0\r] Mar 06 20:55:14.99: [21777]: --> [2:OK] Mar 06 20:55:14.99: [21777]: <-- [10:AT+FBOR=0\r] Mar 06 20:55:15.01: [21777]: --> [2:OK] Mar 06 20:55:15.01: [21777]: <-- [13:AT+FPHCTO=30\r] Mar 06 20:55:15.03: [21777]: --> [2:OK] Mar 06 20:55:15.03: [21777]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Mar 06 20:55:15.05: [21777]: --> [2:OK] Mar 06 20:55:15.05: [21777]: <-- [5:ATM0\r] Mar 06 20:55:15.06: [21777]: --> [2:OK] Mar 06 20:55:15.06: [21777]: <-- [12:AT+FCLASS=2\r] Mar 06 20:55:15.18: [21777]: --> [2:OK] Mar 06 20:55:15.18: [21777]: <-- [10:AT+FTBC=0\r] Mar 06 20:55:15.30: [21777]: --> [2:OK] Mar 06 20:55:15.30: [21777]: <-- [10:AT+FBOR=0\r] Mar 06 20:55:15.42: [21777]: --> [2:OK] Mar 06 20:55:15.42: [21777]: <-- [13:AT+FPHCTO=30\r] Mar 06 20:55:15.54: [21777]: --> [2:OK] Mar 06 20:55:15.54: [21777]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Mar 06 20:55:15.66: [21777]: --> [2:OK] Mar 06 20:55:15.66: [21777]: <-- [12:AT+FLID=" "\r] Mar 06 20:55:15.78: [21777]: --> [2:OK] Mar 06 20:55:15.78: [21777]: DIAL 38030216 Mar 06 20:55:15.78: [21777]: <-- [13:ATDT38030216\r] Mar 06 20:55:31.65: [21777]: --> [5:+FCON] Mar 06 20:55:34.00: [21777]: --> [29:+FCSI: " 38030216"] Mar 06 20:55:34.00: [21777]: REMOTE CSI "38030216" Mar 06 20:55:34.42: [21777]: --> [22:+FDIS: 1,3,0,2,1,0,0,2] Mar 06 20:55:34.42: [21777]: --> [2:OK] Mar 06 20:55:34.42: [21777]: REMOTE best rate 9600 bit/s Mar 06 20:55:34.42: [21777]: REMOTE max page width 1728 pixels in 215 mm Mar 06 20:55:34.42: [21777]: REMOTE max unlimited page length Mar 06 20:55:34.42: [21777]: REMOTE best vres 7.7 line/mm Mar 06 20:55:34.42: [21777]: REMOTE best format 2-D MR Mar 06 20:55:34.42: [21777]: REMOTE best 10 ms, 5 ms/scanline Mar 06 20:55:34.42: [21777]: USE 9600 bit/s Mar 06 20:55:34.42: [21777]: USE 10 ms, 5 ms/scanline Mar 06 20:55:34.42: [21777]: SEND file "docq/doc16.cover;01" Mar 06 20:55:34.42: [21777]: USE page width 1728 pixels in 215 mm Mar 06 20:55:34.42: [21777]: USE unlimited page length Mar 06 20:55:34.42: [21777]: USE 7.7 line/mm Mar 06 20:55:34.42: [21777]: USE 1-D MR Mar 06 20:55:34.42: [21777]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,2\r] Mar 06 20:55:34.55: [21777]: --> [2:OK] Mar 06 20:55:34.55: [21777]: <-- [7:AT+FDT\r] Mar 06 20:55:41.00: [21777]: --> [22:+FDCS: 1,3,0,2,0,0,0,1] Mar 06 20:55:41.00: [21777]: --> [7:CONNECT] Mar 06 20:55:41.00: [21777]: SEND wait for XON Mar 06 20:55:41.00: [21777]: --> [1:^Q] Mar 06 20:55:41.00: [21777]: SEND begin page Mar 06 20:55:54.35: [21777]: SENT 30190 bytes of data Mar 06 20:55:54.35: [21777]: SEND end page Mar 06 20:55:58.20: [21777]: --> [2:OK] Mar 06 20:55:58.20: [21777]: SEND send MPS (more pages, same document) Mar 06 20:55:58.20: [21777]: <-- [9:AT+FET=0\r] Mar 06 20:56:01.26: [21777]: --> [8:+FPTS: 2] Mar 06 20:56:01.26: [21777]: --> [2:OK] Mar 06 20:56:01.26: [21777]: SEND recv RTN (retrain negative) Mar 06 20:56:01.26: [21777]: <-- [24:AT+FDIS=1,2,0,2,0,0,0,2\r] Mar 06 20:56:01.38: [21777]: --> [2:OK] Mar 06 20:56:01.38: [21777]: <-- [7:AT+FDT\r] Mar 06 20:56:08.77: [21777]: --> [22:+FDCS: 1,1,0,2,0,0,0,1] Mar 06 20:56:08.77: [21777]: --> [7:CONNECT] Mar 06 20:56:08.77: [21777]: SEND wait for XON Mar 06 20:56:08.77: [21777]: --> [1:^Q] Mar 06 20:56:08.77: [21777]: SEND begin page Mar 06 20:56:32.27: [21777]: SENT 30190 bytes of data Mar 06 20:56:32.27: [21777]: SEND end page Mar 06 20:56:38.76: [21777]: --> [2:OK] Mar 06 20:56:38.76: [21777]: SEND send MPS (more pages, same document) Mar 06 20:56:38.76: [21777]: <-- [9:AT+FET=0\r] Mar 06 20:56:41.87: [21777]: --> [8:+FPTS: 2] Mar 06 20:56:41.87: [21777]: --> [2:OK] Mar 06 20:56:41.87: [21777]: SEND recv RTN (retrain negative) Mar 06 20:56:41.87: [21777]: <-- [24:AT+FDIS=1,1,0,2,0,0,0,2\r] Mar 06 20:56:41.99: [21777]: --> [2:OK] Mar 06 20:56:41.99: [21777]: <-- [7:AT+FDT\r] Mar 06 20:56:49.83: [21777]: --> [22:+FDCS: 1,0,0,2,0,0,0,1] Mar 06 20:56:49.83: [21777]: --> [7:CONNECT] Mar 06 20:56:49.83: [21777]: SEND wait for XON Mar 06 20:56:49.83: [21777]: --> [1:^Q] Mar 06 20:56:49.83: [21777]: SEND begin page Mar 06 20:57:35.60: [21777]: SENT 30190 bytes of data Mar 06 20:57:35.60: [21777]: SEND end page Mar 06 20:57:46.84: [21777]: --> [2:OK] Mar 06 20:57:46.84: [21777]: SEND send MPS (more pages, same document) Mar 06 20:57:46.84: [21777]: <-- [9:AT+FET=0\r] Mar 06 20:57:49.94: [21777]: --> [8:+FPTS: 2] Mar 06 20:57:50.05: [21777]: --> [2:OK] Mar 06 20:57:50.05: [21777]: SEND recv RTN (retrain negative) Mar 06 20:57:50.05: [21777]: <-- [6:AT+FK\r] Mar 06 20:57:55.68: [21777]: --> [9:+FHNG: 50] Mar 06 20:57:55.68: [21777]: REMOTE HANGUP: Unspecified Transmit Phase D error, including +FPHCTO timeout between data and +FET command (code 50) Mar 06 20:57:57.11: [21777]: --> [2:OK] Mar 06 20:57:57.11: [21777]: <-- [5:ATH0\r] Mar 06 20:57:57.22: [21777]: --> [2:OK] Mar 06 20:57:57.22: [21777]: SESSION END An alternate ending to the logs is: Mar 06 21:11:35.77: [21827]: SENT 30204 bytes of data Mar 06 21:11:35.77: [21827]: <-- data [2] Mar 06 21:11:35.77: [21827]: SEND end page Mar 06 21:11:43.89: [21827]: --> [9:+FHNG: 43] Mar 06 21:11:43.89: [21827]: REMOTE HANGUP: DTE to DCE data underflow (code 43) Mar 06 21:11:45.32: [21827]: --> [2:OK] Mar 06 21:11:45.32: [21827]: SEND: DTE to DCE data underflow; Giving up after 3 attempts to send same page "docq/doc16.cover;01", dirnum 0 Mar 06 21:11:45.32: [21827]: <-- [5:ATH0\r] Mar 06 21:11:45.44: [21827]: --> [2:OK] Mar 06 21:11:45.44: [21827]: SESSION END Please, please help Ken Cole ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- Prev by Date: Re: [hylafax-users] tiff2ps (Resolved) (was Concatenatin
- Next by Date: Re: [hylafax-users] Phase B, Cypheus, Redmon and my contrib
- Prev by thread: Re: [hylafax-users] tiff2ps (Resolved) (was Concatenatin
- Next by thread: Re: [hylafax-users] Very Very Desperate Newbie
- Index(es):
Project hosted by iFAX Solutions