[hylafax-users] Received faxed cut to few lines

["mamboman@gmx.ch" <mamboman@gmx.ch>]

Dear Folks!

I got the following the problem receiving faxes through hylafax:
The faxes are fully received and there is no error mentioned in the log
file, nor there is an error being reported to the sending fax machine
BUT the received faxes (.tif files) are only a few lines long. They ae
only 900Bytes long, so even the session log has a bigger file size.

Any ideas?

I am using:
Hylafax 4 Beta 2-l35
libtiff 3.4-0
tiff 3.4-0
on Suse Linux 6.4 i386

Thanks,
nils


Jan 30 18:44:55.45: [  300]: SESSION BEGIN 00000002 492018585
Jan 30 18:44:55.45: [  300]: <-- [4:ATA\r]
Jan 30 18:45:02.79: [  300]: --> [4:+FCO]
Jan 30 18:45:02.79: [  300]: ANSWER: FAX CONNECTION
Jan 30 18:45:02.80: [  300]: RECV FAX: begin
Jan 30 18:45:04.82: [  300]: --> [27:+FTI:"                    "]
Jan 30 18:45:04.82: [  300]: REMOTE TSI ""
Jan 30 18:45:04.82: [  300]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Jan 30 18:45:04.83: [  300]: REMOTE wants 14400 bit/s
Jan 30 18:45:04.83: [  300]: REMOTE wants page width 1728 pixels in 215
mm
Jan 30 18:45:04.83: [  300]: REMOTE wants unlimited page length
Jan 30 18:45:04.83: [  300]: REMOTE wants 7.7 line/mm
Jan 30 18:45:04.83: [  300]: REMOTE wants 1-D MR
Jan 30 18:45:04.83: [  300]: --> [2:OK]
Jan 30 18:45:04.83: [  300]: <-- [7:AT+FDR\r]
Jan 30 18:45:10.11: [  300]: --> [7:CONNECT]
Jan 30 18:45:10.11: [  300]: RECV: begin page
Jan 30 18:45:10.11: [  300]: RECV: send trigger 022
Jan 30 18:45:10.12: [  300]: <-- data [1]
Jan 30 18:45:30.22: [  300]: RECV: 535 bytes of data, 45 total lines
Jan 30 18:45:30.22: [  300]: --> [17:+FPS:1,2353,0,0,0]
Jan 30 18:45:31.47: [  300]: --> [6:+FET:2]
Jan 30 18:45:31.47: [  300]: RECV recv EOP (no more pages or documents)
Jan 30 18:45:31.47: [  300]: --> [2:OK]
Jan 30 18:45:31.48: [  300]: RECV send MCF (message confirmation)
Jan 30 18:45:31.48: [  300]: RECV FAX (00000002): from , page 1 in 0:27,
INF, 7.7 line/mm, 1-D MR
Jan 30 18:45:31.48: [  300]: RECV FAX (00000002): recvq/fax00002.tif
from , route to <unspecified>, 1 pages in 0:29
Jan 30 18:45:31.48: [  300]: <-- [7:AT+FDR\r]
Jan 30 18:45:34.33: [  300]: --> [7:+FHS:00]
Jan 30 18:45:34.33: [  300]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Jan 30 18:45:34.34: [  300]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif"
"ttyS0" "00000002" ""
Jan 30 18:45:38.74: [  300]: RECV FAX: end
Jan 30 18:45:38.74: [  300]: SESSION END







____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null