Re: [hylafax-users] REMOTE HANGUP:DTE to DCE data underflow (code 43) ????

[Christoph Scheeder <christoph.scheeder@scheeder.de>]

Hi,
No, no problem with modem-configuration.
Pproblem is your server which is feeding the data not as fast
as necessary for your fax-transmission. faxing is as timecritical
as writing CD's....
Get a faster system, reduce the load, or live with the aborted faxes 
and let them be retryed.
Or get a small pc and make it a dedicated fax-server.....
Christoph

Denis Cartier Millon schrieb:
> 
> on my modem Multitech  MT56000ZDX :
> HylaFAX v4.0 (binary).
> Syst�me d' Exploitation : SCO 5.04.
> 
> When the CPU of my computer is very solicited while 10-20 seconds by
> others processes
> some FAX (often the more with 4 or 5 pages) are stop with the message .
> One exemple:
> 
> 15/01 08:01:49 [13-0026] Echec  M0024.015 a X121=20000490782338 (AV#
> CLEMENT-MAGALI ) re-envoi a 08:06
> 
> 15/01 08:01:49 [13-0017] Echec (1e) : DTE to DCE data underflow
> 
> 15/01 08:01:49 Journal de la session en echec :
> jan 15 07:59:42.70: [ 2683]: SESSION BEGIN 00009364 0490782338
> jan 15 07:59:42.70: [ 2683]: SEND FAX: JOB 21 DEST 0490782338 COMMID
> 00009364
> jan 15 07:59:42.71: [ 2683]: DELAY 2600 ms
> jan 15 07:59:45.95: [ 2683]: <-- [15:ATE0V1Q0S0=0H0\r]
> jan 15 07:59:45.98: [ 2683]: --> [2:OK]
> jan 15 07:59:45.98: [ 2683]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> jan 15 07:59:46.02: [ 2683]: --> [2:OK]
> jan 15 07:59:46.02: [ 2683]: <-- [12:AT+FCLASS=2\r]
> jan 15 07:59:46.06: [ 2683]: --> [2:OK]
> jan 15 07:59:46.06: [ 2683]: <-- [10:AT+FTBC=0\r]
> jan 15 07:59:46.11: [ 2683]: --> [2:OK]
> jan 15 07:59:46.11: [ 2683]: <-- [10:AT+FBOR=0\r]
> jan 15 07:59:46.15: [ 2683]: --> [2:OK]
> jan 15 07:59:46.15: [ 2683]: <-- [13:AT+FPHCTO=30\r]
> jan 15 07:59:46.19: [ 2683]: --> [2:OK]
> jan 15 07:59:46.19: [ 2683]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> jan 15 07:59:46.23: [ 2683]: --> [2:OK]
> jan 15 07:59:46.23: [ 2683]: <-- [5:ATM0\r]
> jan 15 07:59:46.27: [ 2683]: --> [2:OK]
> jan 15 07:59:46.27: [ 2683]: <-- [12:AT+FCLASS=2\r]
> jan 15 07:59:46.41: [ 2683]: --> [2:OK]
> jan 15 07:59:46.41: [ 2683]: <-- [10:AT+FTBC=0\r]
> jan 15 07:59:46.53: [ 2683]: --> [2:OK]
> jan 15 07:59:46.53: [ 2683]: <-- [10:AT+FBOR=0\r]
> jan 15 07:59:46.65: [ 2683]: --> [2:OK]
> jan 15 07:59:46.65: [ 2683]: <-- [13:AT+FPHCTO=30\r]
> jan 15 07:59:46.78: [ 2683]: --> [2:OK]
> jan 15 07:59:46.78: [ 2683]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
> jan 15 07:59:46.90: [ 2683]: --> [2:OK]
> jan 15 07:59:46.90: [ 2683]: <-- [20:AT+FLID="SNM-ttya1"\r]
> jan 15 07:59:47.02: [ 2683]: --> [2:OK]
> jan 15 07:59:47.02: [ 2683]: DIAL 0490782338
> jan 15 07:59:47.02: [ 2683]: <-- [15:ATDT0490782338\r]
> jan 15 08:00:04.85: [ 2683]: --> [5:+FCON]
> jan 15 08:00:07.66: [ 2683]: --> [29:+FCSI: "          0490782338"]
> jan 15 08:00:07.66: [ 2683]: REMOTE CSI "0490782338"
> jan 15 08:00:08.03: [ 2683]: --> [22:+FDIS: 1,3,0,2,1,0,0,5]
> jan 15 08:00:08.03: [ 2683]: --> [2:OK]
> jan 15 08:00:08.03: [ 2683]: REMOTE best rate 9600 bit/s
> jan 15 08:00:08.03: [ 2683]: REMOTE max page width 1728 pixels in 215 mm
> 
> jan 15 08:00:08.03: [ 2683]: REMOTE max unlimited page length
> jan 15 08:00:08.05: [ 2683]: REMOTE best vres 7.7 line/mm
> jan 15 08:00:08.05: [ 2683]: REMOTE best format 2-D MR
> jan 15 08:00:08.05: [ 2683]: REMOTE best 20 ms/scanline
> jan 15 08:00:08.05: [ 2683]: USE 9600 bit/s
> jan 15 08:00:08.05: [ 2683]: USE 20 ms/scanline
> jan 15 08:00:08.05: [ 2683]: SEND file "docq/doc6959.ps;01"
> jan 15 08:00:08.05: [ 2683]: USE page width 1728 pixels in 215 mm
> jan 15 08:00:08.05: [ 2683]: USE unlimited page length
> jan 15 08:00:08.05: [ 2683]: USE 7.7 line/mm
> jan 15 08:00:08.05: [ 2683]: USE 1-D MR
> jan 15 08:00:08.05: [ 2683]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,5\r]
> jan 15 08:00:08.16: [ 2683]: --> [2:OK]
> jan 15 08:00:08.16: [ 2683]: <-- [7:AT+FDT\r]
> jan 15 08:00:14.59: [ 2683]: --> [22:+FDCS: 1,3,0,2,0,0,0,5]
> jan 15 08:00:14.59: [ 2683]: --> [7:CONNECT]
> jan 15 08:00:14.59: [ 2683]: SEND wait for XON
> jan 15 08:00:14.59: [ 2683]: --> [1:]
> jan 15 08:00:14.59: [ 2683]: SEND begin page
> jan 15 08:01:43.91: [ 2683]: SENT 81597 bytes of data
> jan 15 08:01:43.91: [ 2683]: SEND end page
> jan 15 08:01:43.91: [ 2683]: --> [9:+FHNG: 43]
> jan 15 08:01:43.91: [ 2683]: REMOTE HANGUP: DTE to DCE data underflow
> (code 43)
> jan 15 08:01:43.91: [ 2683]: --> [2:OK]
> jan 15 08:01:43.91: [ 2683]: <-- [5:ATH0\r]
> jan 15 08:01:48.92: [ 2683]: MODEM
> jan 15 08:01:49.54: [ 2683]: SESSION END
> 
> IS A PROBLEME OF CONFIGURATION OF MY MODEM.(?)
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null