 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] [gnu-hylafax] Forget the previous mail. Here's the good one
- To: "Hylafax" <hylafax-users@hylafax.org>, "gnu-hylafax" <gnu-hylafax@net-foundry.com>
- Subject: Re: [hylafax-users] [gnu-hylafax] Forget the previous mail. Here's the good one
- From: "Antoine Maitre" <antoine.maitre@eivd.ch>
- Date: Wed, 6 Dec 2000 13:35:00 +0100
Still with my problem of sending a fax. I found out in the log files that it doesn't send the cover page when I use a client. In addition to what I gave earlier here are the logs. Here the transmission that didn't work: Dec 06 11:10:47.43: [ 2351]: SESSION BEGIN 00000021 41244202274 Dec 06 11:10:47.43: [ 2351]: SEND FAX: JOB 44 DEST 4202274 COMMID 00000021 Dec 06 11:10:47.43: [ 2351]: DELAY 2600 ms Dec 06 11:10:50.03: [ 2351]: <-- [4:ATZ\r] Dec 06 11:10:50.86: [ 2351]: --> [3:ATZ] Dec 06 11:10:50.86: [ 2351]: --> [2:OK] Dec 06 11:10:50.86: [ 2351]: <-- [15:ATE0V1Q0S0=0H0\r] Dec 06 11:10:51.68: [ 2351]: --> [14:ATE0V1Q0S0=0H0] Dec 06 11:10:51.68: [ 2351]: --> [2:OK] Dec 06 11:10:51.68: [ 2351]: <-- [21:ATS8=2S7=60\Q3&D3&C1\r] Dec 06 11:10:51.79: [ 2351]: --> [2:OK] Dec 06 11:10:51.79: [ 2351]: <-- [12:AT+FCLASS=2\r] Dec 06 11:10:51.90: [ 2351]: --> [2:OK] Dec 06 11:10:51.90: [ 2351]: <-- [3:AT\r] Dec 06 11:10:51.91: [ 2351]: --> [2:OK] Dec 06 11:10:51.91: [ 2351]: <-- [10:AT+FBOR=0\r] Dec 06 11:10:51.92: [ 2351]: --> [2:OK] Dec 06 11:10:51.92: [ 2351]: <-- [3:AT\r] Dec 06 11:10:51.93: [ 2351]: --> [2:OK] Dec 06 11:10:51.93: [ 2351]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Dec 06 11:10:51.96: [ 2351]: --> [2:OK] Dec 06 11:10:51.96: [ 2351]: <-- [5:ATM0\r] Dec 06 11:10:51.97: [ 2351]: --> [2:OK] Dec 06 11:10:51.97: [ 2351]: <-- [12:AT+FCLASS=2\r] Dec 06 11:10:52.09: [ 2351]: --> [2:OK] Dec 06 11:10:52.09: [ 2351]: <-- [3:AT\r] Dec 06 11:10:52.20: [ 2351]: --> [2:OK] Dec 06 11:10:52.20: [ 2351]: <-- [10:AT+FBOR=0\r] Dec 06 11:10:52.31: [ 2351]: --> [2:OK] Dec 06 11:10:52.31: [ 2351]: <-- [3:AT\r] Dec 06 11:10:52.43: [ 2351]: --> [2:OK] Dec 06 11:10:52.43: [ 2351]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Dec 06 11:10:52.55: [ 2351]: --> [2:OK] Dec 06 11:10:52.55: [ 2351]: <-- [23:AT+FLID="NothingSetup"\r] Dec 06 11:10:52.67: [ 2351]: --> [2:OK] Dec 06 11:10:52.70: [ 2351]: DIAL 4202274 Dec 06 11:10:52.70: [ 2351]: <-- [12:ATDT4202274\r] Dec 06 11:11:19.92: [ 2351]: --> [5:+FCON] Dec 06 11:11:22.76: [ 2351]: --> [51:+FNSF: 00000089730888950205100003090F02000000790000] Dec 06 11:11:22.76: [ 2351]: REMOTE NSF " 00000089730888950205100003090F02000000790000" Dec 06 11:11:22.76: [ 2351]: NSF remote fax equipment: unknown Dec 06 11:11:22.76: [ 2351]: --> [29:+FCSI: " 024 420 2274"] Dec 06 11:11:22.76: [ 2351]: REMOTE CSI "024 420 2274" Dec 06 11:11:22.76: [ 2351]: --> [22:+FDIS: 1,3,0,2,1,0,0,4] Dec 06 11:11:22.76: [ 2351]: --> [2:OK] Dec 06 11:11:22.76: [ 2351]: REMOTE best rate 9600 bit/s Dec 06 11:11:22.76: [ 2351]: REMOTE max page width 1728 pixels in 215 mm Dec 06 11:11:22.76: [ 2351]: REMOTE max unlimited page length Dec 06 11:11:22.76: [ 2351]: REMOTE best vres 7.7 line/mm Dec 06 11:11:22.76: [ 2351]: REMOTE best format 2-D MR Dec 06 11:11:22.76: [ 2351]: REMOTE best 20 ms, 10 ms/scanline Dec 06 11:11:22.76: [ 2351]: USE 9600 bit/s Dec 06 11:11:22.76: [ 2351]: USE 20 ms, 10 ms/scanline Dec 06 11:11:22.76: [ 2351]: <-- [5:ATH0\r] Dec 06 11:11:23.58: [ 2351]: --> [2:OK] Dec 06 11:11:23.58: [ 2351]: SESSION END ---------------------------------------------------------------------------------------------------------------------------------- And here's the one sent with sendfax. It worked very well: Dec 06 10:13:43.30: [ 2278]: SESSION BEGIN 00000020 41244202274 Dec 06 10:13:43.30: [ 2278]: SEND FAX: JOB 43 DEST 4202274 COMMID 00000020 Dec 06 10:13:43.30: [ 2278]: DELAY 2600 ms Dec 06 10:13:45.90: [ 2278]: <-- [4:ATZ\r] Dec 06 10:13:46.73: [ 2278]: --> [3:ATZ] Dec 06 10:13:46.73: [ 2278]: --> [2:OK] Dec 06 10:13:46.73: [ 2278]: <-- [15:ATE0V1Q0S0=0H0\r] Dec 06 10:13:47.54: [ 2278]: --> [14:ATE0V1Q0S0=0H0] Dec 06 10:13:47.54: [ 2278]: --> [2:OK] Dec 06 10:13:47.54: [ 2278]: <-- [21:ATS8=2S7=60\Q3&D3&C1\r] Dec 06 10:13:47.65: [ 2278]: --> [2:OK] Dec 06 10:13:47.65: [ 2278]: <-- [12:AT+FCLASS=2\r] Dec 06 10:13:47.76: [ 2278]: --> [2:OK] Dec 06 10:13:47.76: [ 2278]: <-- [3:AT\r] Dec 06 10:13:47.77: [ 2278]: --> [2:OK] Dec 06 10:13:47.77: [ 2278]: <-- [10:AT+FBOR=0\r] Dec 06 10:13:47.78: [ 2278]: --> [2:OK] Dec 06 10:13:47.78: [ 2278]: <-- [3:AT\r] Dec 06 10:13:47.79: [ 2278]: --> [2:OK] Dec 06 10:13:47.79: [ 2278]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Dec 06 10:13:47.81: [ 2278]: --> [2:OK] Dec 06 10:13:47.81: [ 2278]: <-- [5:ATM0\r] Dec 06 10:13:47.82: [ 2278]: --> [2:OK] Dec 06 10:13:47.82: [ 2278]: <-- [12:AT+FCLASS=2\r] Dec 06 10:13:47.94: [ 2278]: --> [2:OK] Dec 06 10:13:47.94: [ 2278]: <-- [3:AT\r] Dec 06 10:13:48.05: [ 2278]: --> [2:OK] Dec 06 10:13:48.05: [ 2278]: <-- [10:AT+FBOR=0\r] Dec 06 10:13:48.16: [ 2278]: --> [2:OK] Dec 06 10:13:48.16: [ 2278]: <-- [3:AT\r] Dec 06 10:13:48.27: [ 2278]: --> [2:OK] Dec 06 10:13:48.27: [ 2278]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] Dec 06 10:13:48.39: [ 2278]: --> [2:OK] Dec 06 10:13:48.39: [ 2278]: <-- [23:AT+FLID="NothingSetup"\r] Dec 06 10:13:48.51: [ 2278]: --> [2:OK] Dec 06 10:13:48.54: [ 2278]: DIAL 4202274 Dec 06 10:13:48.54: [ 2278]: <-- [12:ATDT4202274\r] Dec 06 10:14:15.14: [ 2278]: --> [5:+FCON] Dec 06 10:14:17.99: [ 2278]: --> [51:+FNSF: 00000089730888950205100003090F02000000790000] Dec 06 10:14:17.99: [ 2278]: REMOTE NSF " 00000089730888950205100003090F02000000790000" Dec 06 10:14:17.99: [ 2278]: NSF remote fax equipment: unknown Dec 06 10:14:17.99: [ 2278]: --> [29:+FCSI: " 024 420 2274"] Dec 06 10:14:17.99: [ 2278]: REMOTE CSI "024 420 2274" Dec 06 10:14:17.99: [ 2278]: --> [22:+FDIS: 1,3,0,2,1,0,0,4] Dec 06 10:14:17.99: [ 2278]: --> [2:OK] Dec 06 10:14:17.99: [ 2278]: REMOTE best rate 9600 bit/s Dec 06 10:14:17.99: [ 2278]: REMOTE max page width 1728 pixels in 215 mm Dec 06 10:14:17.99: [ 2278]: REMOTE max unlimited page length Dec 06 10:14:17.99: [ 2278]: REMOTE best vres 7.7 line/mm Dec 06 10:14:17.99: [ 2278]: REMOTE best format 2-D MR Dec 06 10:14:17.99: [ 2278]: REMOTE best 20 ms, 10 ms/scanline Dec 06 10:14:17.99: [ 2278]: USE 9600 bit/s Dec 06 10:14:17.99: [ 2278]: USE 20 ms, 10 ms/scanline Dec 06 10:14:17.99: [ 2278]: SEND file "docq/doc43.cover;31" Dec 06 10:14:17.99: [ 2278]: USE page width 1728 pixels in 215 mm Dec 06 10:14:17.99: [ 2278]: USE unlimited page length Dec 06 10:14:17.99: [ 2278]: USE 7.7 line/mm Dec 06 10:14:17.99: [ 2278]: USE 1-D MR Dec 06 10:14:17.99: [ 2278]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r] Dec 06 10:14:18.11: [ 2278]: --> [2:OK] Dec 06 10:14:18.11: [ 2278]: <-- [7:AT+FDT\r] Dec 06 10:14:24.43: [ 2278]: --> [22:+FDCS: 1,3,0,2,0,0,0,3] Dec 06 10:14:25.02: [ 2278]: --> [7:CONNECT] Dec 06 10:14:25.02: [ 2278]: SEND wait for XON Dec 06 10:14:25.02: [ 2278]: --> [1:] Dec 06 10:14:25.02: [ 2278]: SEND begin page Dec 06 10:14:25.04: [ 2278]: <-- data [1026] Dec 06 10:14:25.04: [ 2278]: <-- data [1027] Dec 06 10:14:25.04: [ 2278]: <-- data [1036] Dec 06 10:14:25.04: [ 2278]: <-- data [1032] Dec 06 10:14:26.48: [ 2278]: <-- data [1033] Dec 06 10:14:26.48: [ 2278]: <-- data [1026] Dec 06 10:14:26.48: [ 2278]: <-- data [1038] Dec 06 10:14:27.74: [ 2278]: <-- data [1055] Dec 06 10:14:28.99: [ 2278]: <-- data [1026] Dec 06 10:14:28.99: [ 2278]: <-- data [1042] Dec 06 10:14:30.25: [ 2278]: <-- data [1043] Dec 06 10:14:31.51: [ 2278]: <-- data [1036] Dec 06 10:14:31.51: [ 2278]: <-- data [1051] Dec 06 10:14:32.77: [ 2278]: <-- data [1058] Dec 06 10:14:34.03: [ 2278]: <-- data [1041] Dec 06 10:14:35.28: [ 2278]: <-- data [1059] Dec 06 10:14:35.28: [ 2278]: <-- data [1057] Dec 06 10:14:36.54: [ 2278]: <-- data [1049] Dec 06 10:14:37.80: [ 2278]: <-- data [1053] Dec 06 10:14:37.80: [ 2278]: <-- data [1044] Dec 06 10:14:39.07: [ 2278]: <-- data [1046] Dec 06 10:14:40.33: [ 2278]: <-- data [1030] Dec 06 10:14:40.33: [ 2278]: <-- data [1044] Dec 06 10:14:41.59: [ 2278]: <-- data [1047] Dec 06 10:14:42.84: [ 2278]: <-- data [1028] Dec 06 10:14:42.84: [ 2278]: <-- data [1024] Dec 06 10:14:44.11: [ 2278]: <-- data [1024] Dec 06 10:14:45.36: [ 2278]: <-- data [224] Dec 06 10:14:45.36: [ 2278]: SENT 27872 bytes of data Dec 06 10:14:45.36: [ 2278]: <-- data [2] Dec 06 10:14:45.36: [ 2278]: SEND end page Dec 06 10:14:48.40: [ 2278]: --> [34:] Dec 06 10:14:48.40: [ 2278]: --> [2:OK] Dec 06 10:14:48.40: [ 2278]: SEND send MPS (more pages, same document) Dec 06 10:14:48.40: [ 2278]: <-- [9:AT+FET=0\r] Dec 06 10:14:57.17: [ 2278]: --> [8:+FPTS: 1] Dec 06 10:14:57.17: [ 2278]: --> [2:OK] Dec 06 10:14:57.17: [ 2278]: SEND recv MCF (message confirmation) Dec 06 10:14:57.17: [ 2278]: SEND FAX (00000020): FROM +41244202089@edu-pc080.eivd.ch TO 4202274 (page 1 of 2 sent in 0:40) Dec 06 10:14:57.17: [ 2278]: SEND FAX (00000020): FROM +41244202089@edu-pc080.eivd.ch TO 4202274 (docq/doc43.cover;31 sent in 0:40) Dec 06 10:14:57.17: [ 2278]: SEND file "docq/doc61.ps;31" Dec 06 10:14:57.17: [ 2278]: USE page width 1728 pixels in 215 mm Dec 06 10:14:57.17: [ 2278]: USE unlimited page length Dec 06 10:14:57.17: [ 2278]: USE 7.7 line/mm Dec 06 10:14:57.17: [ 2278]: USE 1-D MR Dec 06 10:14:57.18: [ 2278]: <-- [7:AT+FDT\r] Dec 06 10:14:57.96: [ 2278]: --> [7:CONNECT] Dec 06 10:14:57.96: [ 2278]: SEND wait for XON Dec 06 10:14:57.96: [ 2278]: --> [1:] Dec 06 10:14:57.96: [ 2278]: SEND begin page Dec 06 10:14:57.96: [ 2278]: <-- data [1026] Dec 06 10:14:57.96: [ 2278]: <-- data [1026] Dec 06 10:14:57.96: [ 2278]: <-- data [275] Dec 06 10:14:57.97: [ 2278]: SENT 2318 bytes of data Dec 06 10:14:57.97: [ 2278]: <-- data [2] Dec 06 10:14:57.97: [ 2278]: SEND end page Dec 06 10:15:00.04: [ 2278]: --> [2:] Dec 06 10:15:00.04: [ 2278]: --> [2:OK] Dec 06 10:15:00.04: [ 2278]: SEND send EOP (no more pages or documents) Dec 06 10:15:00.04: [ 2278]: <-- [9:AT+FET=2\r] Dec 06 10:15:03.61: [ 2278]: --> [8:+FPTS: 1] Dec 06 10:15:03.61: [ 2278]: SEND recv MCF (message confirmation) Dec 06 10:15:03.61: [ 2278]: SEND FAX (00000020): FROM +41244202089@edu-pc080.eivd.ch TO 4202274 (page 2 of 2 sent in 0:06) Dec 06 10:15:03.61: [ 2278]: SEND FAX (00000020): FROM +41244202089@edu-pc080.eivd.ch TO 4202274 (docq/doc61.ps;31 sent in 0:06) Dec 06 10:15:03.61: [ 2278]: <-- [5:ATH0\r] Dec 06 10:15:05.78: [ 2278]: --> [8:+FHNG: 0] Dec 06 10:15:05.78: [ 2278]: REMOTE HANGUP: Normal and proper end of connection (code 0) Dec 06 10:15:05.78: [ 2278]: --> [2:OK] Dec 06 10:15:05.78: [ 2278]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- Follow-Ups:
- Re: [hylafax-users] [gnu-hylafax] Forget the previous mail. Here's the good one
- From: Lee Howard <faxguy@deanox.com>
- Re: [hylafax-users] [gnu-hylafax] Forget the previous mail. Here's the good one
- References:
- [hylafax-users] Forget the previous mail. Here's the good one
- From: "Antoine Maitre" <antoine.maitre@eivd.ch>
- [hylafax-users] Forget the previous mail. Here's the good one
- Prev by Date: [hylafax-users] Busy signal detected 2 days along
- Next by Date: [hylafax-users] No response to MPS repeated 3 times (code 52)
- Prev by thread: [hylafax-users] Forget the previous mail. Here's the good one
- Next by thread: Re: [hylafax-users] [gnu-hylafax] Forget the previous mail. Here's the good one
- Index(es):
Project hosted by iFAX Solutions