[hylafax-users] Multiple page sending....

[Ed Rolison <ed.rolison@byzantium.com>]

Well, this one has me running round in circles at the moment.
Hylafax is currently running in a 'send only' mode, and development is in 
progress to get it to fax invoices automatically. Fine, great. BUT for some 
reason, Hylafax objects to sending more than about 2 inchs of the postscript to 
the destination. I have experimented with this further, and find that I only get 
one page sent (according to the logs, and the tests)

A log is attached below for further info...

First thought was maybe it is a dodgy/crap modem, so I tried using a 
replacement, but exactly the same thing occurs. I have tried viewing the 
generated tiff and it looks ok. 

It is probably something which is really obvious, and maybe I can't see it for 
looking, so please, I need enlightenment :)

OS: Solaris 8
Hylafax version: 4.1beta2
Modem: 3com/USR 56kfaxmodem - and multitech 56k.

Apologies for the couple of pages of lots, but....


Log of 'text mode' fax... should be at 2 pages, but I get one + a blank sheet.

Oct 27 13:26:14.93: [ 5693]: DELAY 2600 ms
Oct 27 13:26:17.53: [ 5693]: <-- [15:ATE0V1Q0S0=0H0\r]
Oct 27 13:26:17.69: [ 5693]: --> [2:OK]
Oct 27 13:26:17.69: [ 5693]: <-- [12:ATS8=2S7=60\r]
Oct 27 13:26:17.84: [ 5693]: --> [2:OK]
Oct 27 13:26:17.85: [ 5693]: <-- [14:AT+FCLASS=2.0\r]
Oct 27 13:26:17.99: [ 5693]: --> [2:OK]
Oct 27 13:26:17.99: [ 5693]: <-- [9:AT+FLO=0\r]
Oct 27 13:26:18.14: [ 5693]: --> [2:OK]
Oct 27 13:26:18.14: [ 5693]: <-- [9:AT+FPP=0\r]
Oct 27 13:26:18.29: [ 5693]: --> [2:OK]
Oct 27 13:26:18.29: [ 5693]: <-- [9:AT+FBO=0\r]
Oct 27 13:26:18.44: [ 5693]: --> [2:OK]
Oct 27 13:26:18.44: [ 5693]: <-- [10:AT+FCT=30\r]
Oct 27 13:26:18.59: [ 5693]: --> [2:OK]
Oct 27 13:26:18.59: [ 5693]: <-- [15:AT+FNR=1,1,1,1\r]
Oct 27 13:26:18.74: [ 5693]: --> [2:OK]
Oct 27 13:26:18.74: [ 5693]: <-- [9:AT+FIE=0\r]
Oct 27 13:26:18.89: [ 5693]: --> [2:OK]
Oct 27 13:26:18.89: [ 5693]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Oct 27 13:26:19.05: [ 5693]: --> [2:OK]
Oct 27 13:26:19.05: [ 5693]: <-- [5:ATM0\r]
Oct 27 13:26:19.19: [ 5693]: --> [2:OK]
Oct 27 13:26:19.21: [ 5693]: <-- [14:AT+FCLASS=2.0\r]
Oct 27 13:26:19.45: [ 5693]: --> [2:OK]
Oct 27 13:26:19.45: [ 5693]: <-- [9:AT+FLO=0\r]
Oct 27 13:26:19.70: [ 5693]: --> [2:OK]
Oct 27 13:26:19.70: [ 5693]: <-- [9:AT+FPP=0\r]
Oct 27 13:26:19.95: [ 5693]: --> [2:OK]
Oct 27 13:26:19.95: [ 5693]: <-- [9:AT+FBO=0\r]
Oct 27 13:26:20.20: [ 5693]: --> [2:OK]
Oct 27 13:26:20.20: [ 5693]: <-- [10:AT+FCT=30\r]
Oct 27 13:26:20.45: [ 5693]: --> [2:OK]
Oct 27 13:26:20.45: [ 5693]: <-- [15:AT+FNR=1,1,1,1\r]
Oct 27 13:26:20.70: [ 5693]: --> [2:OK]
Oct 27 13:26:20.70: [ 5693]: <-- [9:AT+FIE=0\r]
Oct 27 13:26:20.95: [ 5693]: --> [2:OK]
Oct 27 13:26:20.95: [ 5693]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Oct 27 13:26:21.21: [ 5693]: --> [2:OK]
Oct 27 13:26:21.21: [ 5693]: <-- [19:AT+FLI="Byzantium"\r]
Oct 27 13:26:21.46: [ 5693]: --> [2:OK]
Oct 27 13:26:21.47: [ 5693]: DIAL 901926455310
Oct 27 13:26:21.47: [ 5693]: <-- [17:ATDT901926455310\r]
Oct 27 13:26:31.34: [ 5693]: --> [4:+FCO]
Oct 27 13:26:33.97: [ 5693]: --> [10:+FNF:­^LR]
Oct 27 13:26:33.97: [ 5693]: REMOTE NSF "­^LR"
Oct 27 13:26:33.97: [ 5693]: --> [27:+FCI:"Teamphone           "]
Oct 27 13:26:33.97: [ 5693]: REMOTE CSI "Teamphone"
Oct 27 13:26:33.97: [ 5693]: --> [20:+FIS:1,5,2,2,1,0,0,0]
Oct 27 13:26:33.97: [ 5693]: --> [2:OK]
Oct 27 13:26:33.97: [ 5693]: REMOTE best rate 14400 bit/s
Oct 27 13:26:33.97: [ 5693]: REMOTE max page width 2432 pixels in 303 mm
Oct 27 13:26:33.97: [ 5693]: REMOTE max unlimited page length 
Oct 27 13:26:33.97: [ 5693]: REMOTE best vres 7.7 line/mm
Oct 27 13:26:33.97: [ 5693]: REMOTE best format 2-D MR
Oct 27 13:26:33.97: [ 5693]: REMOTE best 0 ms/scanline
Oct 27 13:26:33.97: [ 5693]: USE 14400 bit/s
Oct 27 13:26:33.98: [ 5693]: USE 0 ms/scanline
Oct 27 13:26:33.98: [ 5693]: SEND file "docq/doc398.ps;00"
Oct 27 13:26:33.98: [ 5693]: USE page width 1728 pixels in 215 mm
Oct 27 13:26:33.98: [ 5693]: USE unlimited page length 
Oct 27 13:26:33.98: [ 5693]: USE 3.85 line/mm
Oct 27 13:26:33.98: [ 5693]: USE 1-D MR
Oct 27 13:26:33.98: [ 5693]: <-- [23:AT+FIS=0,5,0,2,0,0,0,0\r]
Oct 27 13:26:34.24: [ 5693]: --> [2:OK]
Oct 27 13:26:34.24: [ 5693]: <-- [7:AT+FDT\r]
Oct 27 13:26:34.52: [ 5693]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Oct 27 13:26:42.17: [ 5693]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Oct 27 13:26:48.81: [ 5693]: --> [7:CONNECT]
Oct 27 13:26:48.81: [ 5693]: SEND begin page
Oct 27 13:26:48.81: [ 5693]: <-- data [1027]
Oct 27 13:26:48.81: [ 5693]: <-- data [1030]
Oct 27 13:26:48.81: [ 5693]: <-- data [1028]
Oct 27 13:26:48.81: [ 5693]: <-- data [1031]
Oct 27 13:26:48.81: [ 5693]: <-- data [1029]
Oct 27 13:26:49.89: [ 5693]: <-- data [1026]
Oct 27 13:26:49.89: [ 5693]: <-- data [1034]
Oct 27 13:26:50.96: [ 5693]: <-- data [1029]
Oct 27 13:26:50.96: [ 5693]: <-- data [1029]
Oct 27 13:26:52.03: [ 5693]: <-- data [1032]
Oct 27 13:26:52.03: [ 5693]: <-- data [1025]
Oct 27 13:26:53.10: [ 5693]: <-- data [1030]
Oct 27 13:26:53.11: [ 5693]: <-- data [1027]
Oct 27 13:26:54.18: [ 5693]: <-- data [1029]
Oct 27 13:26:54.18: [ 5693]: <-- data [1027]
Oct 27 13:26:55.25: [ 5693]: <-- data [1028]
Oct 27 13:26:55.25: [ 5693]: <-- data [1028]
Oct 27 13:26:56.32: [ 5693]: <-- data [1030]
Oct 27 13:26:56.32: [ 5693]: <-- data [1029]
Oct 27 13:26:57.39: [ 5693]: <-- data [1025]
Oct 27 13:26:57.39: [ 5693]: <-- data [1026]
Oct 27 13:26:58.46: [ 5693]: <-- data [1026]
Oct 27 13:26:58.46: [ 5693]: <-- data [1026]
Oct 27 13:26:59.53: [ 5693]: <-- data [1031]
Oct 27 13:26:59.53: [ 5693]: <-- data [1027]
Oct 27 13:27:00.60: [ 5693]: <-- data [1030]
Oct 27 13:27:00.60: [ 5693]: <-- data [1028]
Oct 27 13:27:01.67: [ 5693]: <-- data [1032]
Oct 27 13:27:01.67: [ 5693]: <-- data [1029]
Oct 27 13:27:02.74: [ 5693]: <-- data [1031]
Oct 27 13:27:02.74: [ 5693]: <-- data [1028]
Oct 27 13:27:03.81: [ 5693]: <-- data [1025]
Oct 27 13:27:03.82: [ 5693]: <-- data [1029]
Oct 27 13:27:04.89: [ 5693]: <-- data [1027]
Oct 27 13:27:04.89: [ 5693]: <-- data [828]
Oct 27 13:27:05.96: [ 5693]: SENT 35641 bytes of data
Oct 27 13:27:05.96: [ 5693]: SEND 1D RTC
Oct 27 13:27:05.96: [ 5693]: <-- data [9]
Oct 27 13:27:05.96: [ 5693]: SEND end page
Oct 27 13:27:05.96: [ 5693]: SEND end page
Oct 27 13:27:05.96: [ 5693]: SEND send MPS (more pages, same document)
Oct 27 13:27:05.96: [ 5693]: <-- data [2]
Oct 27 13:27:11.37: [ 5693]: --> [2:OK]
Oct 27 13:27:11.37: [ 5693]: SEND recv MCF (message confirmation)
Oct 27 13:27:11.37: [ 5693]: SEND FAX (00000573): FROM Bagda Faxback@thomas TO 9
01926455310 (page 1 of 2 sent in 0:38)
Oct 27 13:27:11.37: [ 5693]: USE page width 1728 pixels in 215 mm
Oct 27 13:27:11.37: [ 5693]: USE unlimited page length 
Oct 27 13:27:11.37: [ 5693]: USE 3.85 line/mm
Oct 27 13:27:11.38: [ 5693]: USE 1-D MR
Oct 27 13:27:11.38: [ 5693]: <-- [7:AT+FDT\r]
Oct 27 13:27:11.74: [ 5693]: --> [7:CONNECT]
Oct 27 13:27:11.74: [ 5693]: SEND begin page
Oct 27 13:27:11.74: [ 5693]: <-- data [959]
Oct 27 13:27:11.74: [ 5693]: SENT 956 bytes of data
Oct 27 13:27:11.74: [ 5693]: SEND 1D RTC
Oct 27 13:27:11.75: [ 5693]: <-- data [9]
Oct 27 13:27:11.75: [ 5693]: SEND end page
Oct 27 13:27:11.75: [ 5693]: SEND send EOP (no more pages or documents)
Oct 27 13:27:11.75: [ 5693]: <-- data [2]
Oct 27 13:27:16.42: [ 5693]: --> [7:+FHS:00]
Oct 27 13:27:16.42: [ 5693]: REMOTE HANGUP: Normal and proper end of connection 
(code 0)
Oct 27 13:27:16.42: [ 5693]: SEND recv MCF (message confirmation)
Oct 27 13:27:16.44: [ 5693]: SEND FAX (00000573): FROM Bagda Faxback@thomas TO 9
01926455310 (page 2 of 2 sent in 0:05)
Oct 27 13:27:16.44: [ 5693]: SEND FAX (00000573): FROM Bagda Faxback@thomas TO 9
01926455310 (docq/doc398.ps;00 sent in 0:43)
Oct 27 13:27:16.48: [ 5693]: <-- [5:ATH0\r]
Oct 27 13:27:16.58: [ 5693]: --> [2:OK]
Oct 27 13:27:16.58: [ 5693]: SESSION END

And a 'tiff' invoice.... it looks like a remarkably short amount of data was 
sent, however...

Oct 26 15:40:54.87: [20610]: SESSION BEGIN 00000566 441926901926455310
Oct 26 15:40:54.87: [20610]: SEND FAX: JOB 392 DEST 901926455310 COMMID 00000566
Oct 26 15:40:54.88: [20610]: DELAY 2600 ms
Oct 26 15:40:57.48: [20610]: <-- [15:ATE0V1Q0S0=0H0\r]
Oct 26 15:40:57.55: [20610]: --> [14:ATE0V1Q0S0=0H0]
Oct 26 15:40:57.56: [20610]: --> [2:OK]
Oct 26 15:40:57.56: [20610]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Oct 26 15:40:57.62: [20610]: --> [2:OK]
Oct 26 15:40:57.62: [20610]: <-- [12:AT+FCLASS=2\r]
Oct 26 15:40:57.69: [20610]: --> [2:OK]
Oct 26 15:40:57.69: [20610]: <-- [10:AT+FTBC=0\r]
Oct 26 15:40:57.76: [20610]: --> [2:OK]
Oct 26 15:40:57.77: [20610]: <-- [10:AT+FBOR=0\r]
Oct 26 15:40:57.82: [20610]: --> [2:OK]
Oct 26 15:40:57.83: [20610]: <-- [13:AT+FPHCTO=30\r]
Oct 26 15:40:57.89: [20610]: --> [2:OK]
Oct 26 15:40:57.90: [20610]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Oct 26 15:40:57.96: [20610]: --> [2:OK]
Oct 26 15:40:57.96: [20610]: <-- [5:ATM0\r]
Oct 26 15:40:58.02: [20610]: --> [2:OK]
Oct 26 15:40:58.04: [20610]: <-- [12:AT+FCLASS=2\r]
Oct 26 15:40:58.20: [20610]: --> [2:OK]
Oct 26 15:40:58.21: [20610]: <-- [10:AT+FTBC=0\r]
Oct 26 15:40:58.36: [20610]: --> [2:OK]
Oct 26 15:40:58.37: [20610]: <-- [10:AT+FBOR=0\r]
Oct 26 15:40:58.52: [20610]: --> [2:OK]
Oct 26 15:40:58.53: [20610]: <-- [13:AT+FPHCTO=30\r]
Oct 26 15:40:58.69: [20610]: --> [2:OK]
Oct 26 15:40:58.70: [20610]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Oct 26 15:40:58.86: [20610]: --> [2:OK]
Oct 26 15:40:58.87: [20610]: <-- [20:AT+FLID="Byzantium"\r]
Oct 26 15:40:59.03: [20610]: --> [2:OK]
Oct 26 15:40:59.04: [20610]: DIAL 901926455310
Oct 26 15:40:59.04: [20610]: <-- [18:ATDT901926455310@\r]
Oct 26 15:41:12.82: [20610]: --> [5:+FCON]
Oct 26 15:41:15.32: [20610]: --> [39:+FNSF:AD 00 0C 00 00 03 52 00 02 00 00 ]
Oct 26 15:41:15.32: [20610]: REMOTE NSF "AD 00 0C 00 00 03 52 00 02 00 00"
Oct 26 15:41:15.32: [20610]: --> [28:+FCSI:"Teamphone           "]
Oct 26 15:41:15.32: [20610]: REMOTE CSI "Teamphone"
Oct 26 15:41:15.32: [20610]: --> [21:+FDIS:1,5,2,2,1,2,0,0]
Oct 26 15:41:15.32: [20610]: --> [2:OK]
Oct 26 15:41:15.32: [20610]: REMOTE best rate 14400 bit/s
Oct 26 15:41:15.32: [20610]: REMOTE max page width 2432 pixels in 303 mm
Oct 26 15:41:15.32: [20610]: REMOTE max unlimited page length 
Oct 26 15:41:15.32: [20610]: REMOTE best vres 7.7 line/mm
Oct 26 15:41:15.32: [20610]: REMOTE best format 2-D MR
Oct 26 15:41:15.33: [20610]: REMOTE supports T.30 Annex C, half duplex ECM
Oct 26 15:41:15.33: [20610]: REMOTE best 0 ms/scanline
Oct 26 15:41:15.33: [20610]: USE 14400 bit/s
Oct 26 15:41:15.33: [20610]: USE 0 ms/scanline
Oct 26 15:41:15.33: [20610]: SEND file "docq/doc391.tif;00"
Oct 26 15:41:15.33: [20610]: USE page width 1728 pixels in 215 mm
Oct 26 15:41:15.33: [20610]: USE unlimited page length 
Oct 26 15:41:15.33: [20610]: USE 3.85 line/mm
Oct 26 15:41:15.33: [20610]: USE 1-D MR
Oct 26 15:41:15.33: [20610]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
Oct 26 15:41:15.50: [20610]: --> [2:OK]
Oct 26 15:41:15.50: [20610]: <-- [7:AT+FDT\r]
Oct 26 15:41:22.54: [20610]: --> [21:+FDCS:0,5,0,2,0,0,0,0]
Oct 26 15:41:22.54: [20610]: --> [7:CONNECT]
Oct 26 15:41:22.54: [20610]: SEND wait for XON
Oct 26 15:41:22.54: [20610]: --> [1:]
Oct 26 15:41:22.54: [20610]: SEND begin page
Oct 26 15:41:22.54: [20610]: <-- data [1030]
Oct 26 15:41:22.54: [20610]: <-- data [1029]
Oct 26 15:41:22.55: [20610]: <-- data [468]
Oct 26 15:41:22.55: [20610]: SENT 2516 bytes of data
Oct 26 15:41:22.55: [20610]: <-- data [2]
Oct 26 15:41:22.55: [20610]: SEND end page
Oct 26 15:41:23.77: [20610]: --> [2:OK]
Oct 26 15:41:23.77: [20610]: SEND send EOP (no more pages or documents)
Oct 26 15:41:23.77: [20610]: <-- [9:AT+FET=2\r]
Oct 26 15:41:27.74: [20610]: --> [7:+FPTS:1]
Oct 26 15:41:27.74: [20610]: SEND recv MCF (message confirmation)
Oct 26 15:41:27.74: [20610]: SEND FAX (00000566): FROM Invoice@thomas TO
 901926455310 (page 1 of 1 sent in 0:12)
Oct 26 15:41:27.74: [20610]: SEND FAX (00000566): FROM Invoice@thomas TO
 901926455310 (docq/doc391.tif;00 sent in 0:12)
Oct 26 15:41:27.79: [20610]: <-- [5:ATH0\r]
Oct 26 15:41:29.21: [20610]: --> [7:+FHNG:0]
Oct 26 15:41:29.21: [20610]: REMOTE HANGUP: Normal and proper end of connection 
(code 0)
Oct 26 15:41:29.61: [20610]: --> [2:OK]
Oct 26 15:41:29.61: [20610]: SESSION END

--
Ed Rolison
Systems Admin
ER706-RIPE
ed@byzantium.com



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null