Re: [hylafax-users] Courier I-Modem ISDN/V.34 Problem

[Cédric Bole-Richard <c.bolerichard@fabi.fr>]

I think that i have found the solution of my problem !!! Yeah !

In my config, i have added :
ModemBaudRateDelay: 1000

It's the delay after setting baud rate.

This is configuration with this message for help an other user who
would have the same problem !!

An other question :
what is the maximum baud rate for Hylafax and this modem ? 38400 ? or more ?

CountryCode:  33
AreaCode:  04
FAXNumber:  0381000000
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing:  0x0f
SessionTracing:  11
RecvFileMode:  0600
LogFileMode:  0600
DeviceMode:  0600
RingsBeforeAnswer: 0
SpeakerVolume:  off
GettyArgs:  "-h %l dx_%s"
LocalIdentifier: "XXX"
TagLineFont:  etc/lutRS18.pcf
TagLineFormat:  "From %%l|%c|Page %%p of %%t"
PercentGoodLines: 85
MaxRecvPages:  25
#
ModemType:  Class2.0
ModemRate:  19200
ModemFlowControl: rtscts
ModemNoFlowCmd:  AT&H0&I0&R1
ModemHardFlowCmd: AT&H1&I0&R2
ModemSoftFlowCmd: AT&H2&I2&R1
ModemSoftFlowCmd: ""
ModemSetupDTRCmd: ATS13=1&D2
ModemSetupDCDCmd: AT&C1
ModemSetupAACmd: AT+FAA=1
ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
Class2BUGCmd:  AT+FBU=0
Class2CQQueryCmd: !(0),(0)
Class2NRCmd:  AT+FNR=1,1,1,0

# Added by me

#JobReqBusy:  180
#JobNoanswer:  180
#JobNoCarrier:  180
#JobReqOther:  180
#NoCarrierRetrys: 1
#Use2D:   yes

ModemBaudRateDelay: 1000
ModemDialCmd:  ATDT%s
ModemResetCmds:  ""
#ModemResetCmds:  ATZ
ModemAnswerCmd:  ATA
ModemNoAutoAnswerCmd: ATS0=0
ModemEchoOffCmd: ATE0
ModemVerboseResultsCmd: ATV1
ModemResultCodesCmd: ATQ0X4
ModemOnHookCmd:  ATH0
ModemSoftResetCmd: ATZ
ModemWaitTimeCmd: ATS7=60
ModemCommaPauseTimeCmd: ATS8=2
ModemRecvFillOrder: LSB2MSB
ModemSendFillOrder: LSB2MSB

Class2Cmd:  AT+FCLASS=2.0
Class2APQueryCmd: ""
Class2BORCmd:  AT+FBO=0
Class2CQCmd:  ""
#Class2CQCmd:  AT+FCQ=0,0
Class2AbortCmd:  AT+FKS
Class2DCCQueryCmd: AT+FCC=?
Class2TBCCmd:  AT+FPP=0
Class2CRCmd:  AT+FCR=1
Class2PHCTOCmd:  AT+FCT=60
Class2LIDCmd:  AT+FLI
Class2DCCCmd:  AT+FCC
Class2DISCmd:  AT+FIS
Class2DDISCmd:  ""
Class2CIGCmd:  AT+FPI
Class2PIECmd:  AT+FIE=0
Class2PTSCmd:  AT+FPS
Class2SPLCmd:  AT+FSP
Class2NFLOCmd:  AT+FLO=0
Class2SFLOCmd:  AT+FLO=1
Class2HFLOCmd:  AT+FLO=2

----- Original Message -----
>From: Dmitry Bely <dbely@mail.ru>
>To: Cédric Bole-Richard <c.bolerichard@fabi.fr>
>Cc: <hylafax-users@hylafax.org>
>Sent: Wednesday, Oct 25, 2000 2:12 PM
>Subject: Re: [hylafax-users] Courier I-Modem ISDN/V.34 Problem
>
>
> Cédric Bole-Richard <c.bolerichard@fabi.fr> writes:
>
> > OK, i have missed double quotes, but, always the problem with there.
> >
> > Oct 25 11:04:01 Srv_Fabi02 FaxGetty[15281]: OPEN /dev/ttyS0
> > Oct 25 11:04:01 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR OFF
> > Oct 25 11:04:01 Srv_Fabi02 FaxGetty[15281]: DELAY 2600 ms
> > Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: MODEM set DTR ON
> > Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: MODEM set baud rate: 38400
baud,
> > input flow RTS/CTS, output flow RTS/CTS
> > Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: MODEM flush i/o
> > Oct 25 11:04:03 Srv_Fabi02 FaxGetty[15281]: <-- [4:ATZ\r]
> > Oct 25 11:04:08 Srv_Fabi02 FaxGetty[15281]: MODEM TIMEOUT: reading line
from modem
> > Oct 25 11:04:08 Srv_Fabi02 FaxGetty[15281]: MODEM <Timeout>
>
> 

Are you *absolutely* sure that your minicom (which works as you claim)
configured the same way? The same port (/dev/ttyS0), the same speed (38400)
etc? Are you *absolutely* sure that your modem has no aliases (e.g.
/dev/modem), preventing the correct UUCP-style locking? Excuse me, but I
don't believe in miracles...

>
> Hope to hear from you soon,
> Dmitry
>


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null