Re: [hylafax-users] Courier I-Modem ISDN/V.34 Problem

[C�dric Bole-Richard <c.bolerichard@fabi.fr>]

In minicom, if i type ATE0V1Q0X4S0=0H0, the answer is OK

I see sometimes the sequence is ok but after some minutes, i have the same
problem. (Faxgetty respawn and the problem come back).
I have tested to remove one command in the sequence, but always the problem.

Christoph Scheeder <christoph.scheeder@scheeder.de> wrote:
>
>Hi,
>first, to clarify something, under newer versions of linux kernels
>the old devices /dev/cuax shouldn't be used anymore, because they
>lead to problems with locking the device correct, imagine
>you have a ppp-connection set to use dev/ttyS0 and hylafax set to
>use /dev/cua0. now if you are using the ppp-connection and hylafax
>trys to send a fax your ppp-connection will be killed, cause hylafax
>doesn't realize the modem is used by another process.
>
>but now to your problems.
>what do you get as response in minicom if you type
>
>ATE0V1Q0X4S0=0H0
>
>(that is the string hylafax sends to your modem and does not get
>a modemresponse for)
>
>if your modem times out on that string, try removing one command after
>the other until you find the incorrect one.
>hope it helps
>Christoph
>


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null