[hylafax-users]

[Carlo Georges <georgesc@pt.lu>]

Hello all
I'm new to hylafax formerly used the mgettty + sendfax pachkage with no
problems.
When i try to send to my canon multipass 10 fax I get a transmission error
with following message
Oct 15 15:36:51.01: [26621]: SESSION BEGIN 00000004 352415552084
Oct 15 15:36:51.01: [26621]: SEND FAX: JOB 1 DEST 552084 COMMID 00000004
Oct 15 15:36:51.01: [26621]: DELAY 2600 ms
Oct 15 15:36:53.62: [26621]: <-- [15:ATE0V1Q0S0=0H0\r]
Oct 15 15:36:53.64: [26621]: --> [2:OK]
Oct 15 15:36:53.64: [26621]: <-- [12:ATS8=2S7=60\r]
Oct 15 15:36:53.66: [26621]: --> [2:OK]
Oct 15 15:36:53.66: [26621]: <-- [14:AT+FCLASS=2.0\r]
Oct 15 15:36:53.68: [26621]: --> [2:OK]
Oct 15 15:36:53.68: [26621]: <-- [9:AT+FLO=0\r]
Oct 15 15:36:53.70: [26621]: --> [2:OK]
Oct 15 15:36:53.70: [26621]: <-- [9:AT+FPP=0\r]
Oct 15 15:36:53.72: [26621]: --> [2:OK]
Oct 15 15:36:53.72: [26621]: <-- [9:AT+FBO=0\r]
Oct 15 15:36:53.74: [26621]: --> [2:OK]
Oct 15 15:36:53.74: [26621]: <-- [10:AT+FCT=30\r]
Oct 15 15:36:53.76: [26621]: --> [2:OK]
Oct 15 15:36:53.76: [26621]: <-- [15:AT+FNR=1,1,1,1\r]
Oct 15 15:36:53.78: [26621]: --> [2:OK]
Oct 15 15:37:57.75: [26621]: SEND 1D RTC
Oct 15 15:37:57.75: [26621]: <-- data [9]
Oct 15 15:37:57.76: [26621]: SEND end page
Oct 15 15:37:57.76: [26621]: SEND send EOP (no more pages or documents)
Oct 15 15:37:57.76: [26621]: <-- data [2]
Oct 15 15:38:45.81: [26621]: --> [7:+FHS:43]
Oct 15 15:38:45.81: [26621]: REMOTE HANGUP: DTE to DCE data underflow (code
43)
Oct 15 15:38:45.81: [26621]: SEND: DTE to DCE data underflow; Giving up
after 3$
Oct 15 15:38:45.81: [26621]: <-- [5:ATH0\r]
Oct 15 15:38:47.01: [26621]: --> [2:OK]
Oct 15 15:38:47.01: [26621]: SESSION END

What does the code 43 mean and is there a way to correct this



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null