![]() |
I had a lot of problems with the same modem. I read in the news to change to class1 and xon/xoff handshake. So the problems have gone now. All I changed was: NEW: < ModemType: Class1 # use this to supply a hint < ModemRate: 19200 # max rate for DCE-DTE communication < ModemFlowControl: xonxoff # XON/XOFF flow control assumed --- OLD: > ModemType: Class2.0 # use this to supply a hint > ModemRate: 38400 # max rate for DCE-DTE communication > ModemFlowControl: rtscts # XON/XOFF flow control assumed NEW: < ModemAnswerCmd: ATS40=255A # use this to answer pho Steven Thompson schrieb: > Hi All > > I have set-up hylafax-4.1beta2-135 on SuSE 6.4 with a U.S. ROBOTICS 56K FAX > Modem. When I send faxes from MS Word 2000 to the WHFC 1.0.8 release Fax > Printer (Apple LaserWriter 16/600 PS) on Win 2000 to a "HP OfficeJet 700 All > in one" fax printer, the first 5 lines are fine, but then rest is garbage. > Hylafax reports the fax sent as successful. I can receive faxes from the "HP > OfficeJet 700 All in one" Printer with no problems. I can send the same Word > Doc to my test "Relay Fax Server" with no problems. If I change the printer > driver to the HP Laser 4/4M PS fax receive fails on the Relay fax server. > > Does anyone know where the problem could be. > > Thanks in advance > > Steven > > PS. WHFC 1.0.8 works well & it is very fast > Hylafax works well > > > > ____________________ HylaFAX(tm) Users Mailing List _______________________ > To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null -- Mit freundlichen Gr��en, Dr. Walter Willmertinger CONSYS Gesellschaft f�r Softwaretechnologie und Systementwicklung mbH Dr. Walter Willmertinger Landsberger Strasse 402 EMail: willmertinger@consys.de 81241 Muenchen Phone: +49 89 589 789 0 Germany Fax: +49 89 589 789 99 WWW-Homepage: http://www.consys.de ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null