[hylafax-users] Fw: Canon L770 Fax Machine problem

["GaoQiang(163)" <gaoqiang@163.net>]

Hi All

I installed HylaFAX v4.1beta2 under Linux RedHat 6.0 with modem Rockwell
AC/K56/v2.210-k56_2M_DI as Class 2 config.
It seems worked very well in the past week, only it can not received fax
from a remote site with Canon L770 fax machine. below is log:
Sep 27 21:59:44.53: [  790]: SESSION BEGIN 00000219 001000000
Sep 27 21:59:44.54: [  790]: <-- [4:ATA\r]
Sep 27 21:59:54.99: [  790]: --> [5:+FCON]
Sep 27 21:59:54.99: [  790]: ANSWER: FAX CONNECTION
Sep 27 21:59:54.99: [  790]: RECV FAX: begin
Sep 27 22:00:20.17: [  790]: --> [29:+FTSI: "      +001   000000"]
Sep 27 22:00:20.17: [  790]: REMOTE TSI "+001   000000"
Sep 27 22:00:20.62: [  790]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
Sep 27 22:00:20.62: [  790]: REMOTE wants 9600 bit/s
Sep 27 22:00:20.62: [  790]: REMOTE wants page width 1728 pixels in 215 mm
Sep 27 22:00:20.62: [  790]: REMOTE wants unlimited page length
Sep 27 22:00:20.62: [  790]: REMOTE wants 3.85 line/mm
Sep 27 22:00:20.62: [  790]: REMOTE wants 1-D MR
Sep 27 22:00:20.62: [  790]: --> [2:OK]
Sep 27 22:00:20.62: [  790]: <-- [7:AT+FDR\r]
Sep 27 22:00:22.15: [  790]: --> [5:+FCFR]
Sep 27 22:00:35.94: [  790]: --> [10:+FHNG: 101]
Sep 27 22:00:35.94: [  790]: REMOTE HANGUP: RSPREC invalid response received
(code 101)
Sep 27 22:00:35.94: [  790]: RECV FAX (00000219): recvq/fax00160.tif from
+001   000000, route to <unspecified>, 0 pages in 0:41
Sep 27 22:00:35.94: [  790]: RECV FAX: RSPREC invalid response received
Sep 27 22:00:35.95: [  790]: RECV FAX (00000219): session with +001   000000
terminated abnormally: RSPREC invalid response received
Sep 27 22:00:35.95: [  790]: RECV FAX: bin/faxrcvd "recvq/fax00160.tif"
"ttyS0" "00000219" "RSPREC invalid response received"
Sep 27 22:00:39.47: [  790]: RECV FAX: end
Sep 27 22:00:39.47: [  790]: SESSION END

and I compared with succedly received fax log from other fax machine the
difference is:

Sep 29 14:27:02.52: [  482]: --> [2:OK]
Sep 29 14:27:02.52: [  482]: <-- [7:AT+FDR\r]
Sep 29 14:27:04.05: [  482]: --> [5:+FCFR]
Sep 29 14:27:07.01: [  482]: --> [22:+FDCS: 0,3,0,2,0,0,0,5]
Sep 29 14:27:07.01: [  482]: REMOTE wants 9600 bit/s
Sep 29 14:27:07.01: [  482]: REMOTE wants page width 1728 pixels in 215 mm
Sep 29 14:27:07.01: [  482]: REMOTE wants unlimited page length
Sep 29 14:27:07.01: [  482]: REMOTE wants 3.85 line/mm
Sep 29 14:27:07.01: [  482]: REMOTE wants 1-D MR
Sep 29 14:27:07.01: [  482]: --> [7:CONNECT]

then continue to receive. but for Canon L770 will be:

Sep 27 22:00:20.62: [  790]: --> [2:OK]
Sep 27 22:00:20.62: [  790]: <-- [7:AT+FDR\r]
Sep 27 22:00:22.15: [  790]: --> [5:+FCFR]
Sep 27 22:00:35.94: [  790]: --> [10:+FHNG: 101]
Sep 27 22:00:35.94: [  790]: REMOTE HANGUP: RSPREC invalid response received
(code 101)
Sep 27 22:00:35.94: [  790]: RECV FAX (00000219): recvq/fax00160.tif from
+001   000000, route to unspecified

Any help will be highly appreciated.

Frank Gao





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null