[hylafax-users] Problems receiving a fax

["Bernd Proissl" <lists@proissl.de>]

To the fax protocol gurus!

Please, can someone explain the follwing log.
It comes from a USR in Class 2.0
HF version is HylaFAX (tm) Version 4.1beta44
Some other test faxes worked well.

Thanks again!

Bernd


--------------------------------------------------------------------------
recvq/fax00032.tif:
Could not open recvq/fax00032.tif; either not TIFF or corrupted.


The full document was not received because:

    RSPREC invalid response received

    ---- Transcript of session follows ----
Sep 27 22:54:12.91: [ 2349]: SESSION BEGIN 00000040 4971619531020
Sep 27 22:54:12.98: [ 2349]: <-- [4:ATA\r]
Sep 27 22:54:20.54: [ 2349]: --> [4:+FCO]
Sep 27 22:54:20.54: [ 2349]: ANSWER: FAX CONNECTION
Sep 27 22:54:20.54: [ 2349]: STATE CHANGE: ANSWERING -> RECEIVING
Sep 27 22:54:20.54: [ 2349]: MODEM input buffering enabled
Sep 27 22:54:20.55: [ 2349]: RECV FAX: begin
Sep 27 22:54:22.57: [ 2349]: --> [27:+FTI:"                    "]
Sep 27 22:54:22.57: [ 2349]: REMOTE TSI ""
Sep 27 22:54:22.57: [ 2349]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Sep 27 22:54:22.57: [ 2349]: REMOTE wants 14400 bit/s
Sep 27 22:54:22.57: [ 2349]: REMOTE wants page width 1728 pixels in 215 mm
Sep 27 22:54:22.58: [ 2349]: REMOTE wants unlimited page length
Sep 27 22:54:22.58: [ 2349]: REMOTE wants 3.85 line/mm
Sep 27 22:54:22.58: [ 2349]: REMOTE wants 1-D MR
Sep 27 22:54:22.58: [ 2349]: --> [2:OK]
Sep 27 22:54:22.58: [ 2349]: <-- [7:AT+FDR\r]
Sep 27 22:54:27.94: [ 2349]: --> [7:CONNECT]
Sep 27 22:54:27.94: [ 2349]: RECV: begin page
Sep 27 22:54:27.94: [ 2349]: RECV: send trigger 022
Sep 27 22:54:27.94: [ 2349]: <-- data [1]
Sep 27 22:54:28.02: [ 2349]: RECV/CQ: Bad 1D pixel count, row 0, got 2267,
expected 1728
Sep 27 22:54:28.02: [ 2349]: RECV/CQ: Bad 1D pixel count, row 1, got 3441,
expected 1728
Sep 27 22:54:29.00: [ 2349]: RECV/CQ: Adjusting for trailing noise (2 run)
Sep 27 22:54:29.00: [ 2349]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines
Sep 27 22:54:29.00: [ 2349]: --> [14:+FPS:1,2,0,0,0]
Sep 27 22:54:39.35: [ 2349]: --> [7:+FHS:A1]
Sep 27 22:54:39.35: [ 2349]: REMOTE HANGUP: RSPREC invalid response received
(code A1)
Sep 27 22:54:39.48: [ 2349]: --> [2:OK]
Sep 27 22:54:39.49: [ 2349]: RECV FAX (00000040): recvq/fax00032.tif from ,
route to <unspecified>, 0 pages in 0:19
Sep 27 22:54:39.55: [ 2349]: RECV FAX: RSPREC invalid response received
Sep 27 22:54:39.55: [ 2349]: RECV FAX (00000040): session with  terminated
abnormally: RSPREC invalid response received
Sep 27 22:54:39.55: [ 2349]: RECV FAX: bin/faxrcvd "recvq/fax00032.tif"
"ttyS0" "00000040" "RSPREC invalid response received"



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null