HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Connecting External USR v.90 modem



Yup, things went a lot further this time around.  
Now I get a message saying that "the configured DTE-DCE communication rate
() is different than the rate we are using to set up the modem (38400)."
I can't see that as being positive.  My faxes get about half way through the
first page than I get an "Error on Page 1" status report printed out by the
receiveing fax.




> -----Original Message-----
> From:	Lee Howard [SMTP:faxguy@deanox.com]
> Sent:	Wednesday, September 27, 2000 6:27 PM
> To:	Tanner, Robby
> Subject:	RE: [hylafax-users] Connecting External USR v.90 modem
> 
> At 07:13 PM 9/27/00 -0500, Tanner, Robby wrote:
> >Sorry, I guess I must have been vague.
> >I have an INTERNAL modem on ttyS2 and the external connected to ttyS1.
> 
> Ah.  Then don't change your BIOS, delete the config.devid file and rerun
> faxaddmodem for ttyS1.  If it can't communicate with the modem, then
> there's a problem with BIOS settings or something else.
> 
> >Thanks again.
> >I also modified the line in inittab to run faxgetty on ttyS1 rather than
> >ttyS2.  That should help a little.
> 
> There's your problem.
> 
> Lee.
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions