HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Q: AT initial parameter string for Multitech CommPlete ?






Hello hylafax world.

We are using the Multitech CommPlete box with 2 pri cards, 60 modems and TCP/IP
connection.

Does anyone have a good AT initial parameter string to setup modems ?

The one i have build doesn't work with 15 % of our 3000 customers.

Here is a link to the box on the web :
http://www.multitech.com/SUPPORT/CommPlete/

The box   : CC9600
Controler : MR9600
Modems    : 2 x MT5634HD16
RAS       : 2 x
PRI       : 2 x



Below is based on the default MT config file.
Here it is :

# $Id: standard,v 1.1 1999/10/12 10:57:19 dansml Exp $

# The modem has been tried with both XON/XOFF and RTS/CTS flow
# control; this configuration is for hardware flow control.
#
#
CountryCode:            45
AreaCode:               415
FAXNumber:              "+45.45821644 "
LongDistancePrefix:     104500
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "+45.45821644 "
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
NoCarrierRetrys:        10
MaxRecvPages:           25
JobReqNoCarrier:        600
JobReqNoAnswer:         60
JobReqOther:            600
ModemType:              Class2          # use class 2 interface
ModemRate:              38400           # lock rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
ModemHardFlowCmd:       AT&E4           # hardware flow control
ModemSoftFlowCmd:       AT&E5           # software flow control
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
ModemDialCmd:           ATDT%s          # T for tone dialing, @ for silence
ModemResetCmds:         "ATX3"          # stuff to do when modem is reset
Class2RecvDataTrigger:  "\022"          # character sent to modem to start recv
Class2BugCmd:           AT+FBUG=0




Respect,
Benjamin Petersen
Systemdeveloper
Dan Net A/S




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions