[hylafax-users] problem with a modem USR 56K

[Fabrice Cartron <fabrice.cartron@free.fr>]

Hello,
i am a new user of Hylafax. I try to install a fax server
but i have a problem. I use a USR 56 K faxmodem.
So, for configuring my modem, after trying the command
faxaddmodem (lot of problem with it), i take the default
file for a USR class 2 modem.
Recognize is OK and i can receive fax.
but when i try to sende a fax, it's no possible, CARRIER NO DETECTED.

Somebody can help me?

(sorry for my bad english from France!)


hylafax log:

Sep 15 18:34:23 Com FaxSend[1213]: SEND FAX: JOB 2 DEST 0.05.65.31.79.54
COMMID 00000024
Sep 15 18:35:21 Com FaxSend[1213]: SEND FAILED: No carrier detected
Sep 15 18:35:22 Com FaxQueuer[217]: NOTIFY: bin/notify "doneq/q2"
"failed" "1:05"
Sep 15 18:35:22 Com FaxQueuer[217]: Bad exit status 0400 for "bin/notify
"doneq/q2" "failed" "1:05""
Sep 15 18:35:36 Com FaxGetty[511]: MODEM USR U.S. Robotics 56K FAX EXT
Rev. 11.6.11/Configuration Profile... Product type           CTR-21
External Product ID:            24563001 Options
V32bis,V.80,V.34+,x2, V.90 Fax Options            Class 1/Class 2.0 Line
Options           Caller ID, Distinctive Ring Clock Freq
92.0Mhz EPROM                  256k RAM                    32k FLASH
date             12/2/98 FLASH rev              11.6.11 DSP
date               12/2/98 DSP rev                11.6.11

config.ttyS0:



# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control.
#
# CONFIG:CLASS1:1444:.*:XON*|DEF*: Manufacturer=USRobotics
Model=Courier/Sportster
# CONFIG:CLASS1:1445:.*:XON*|DEF*: Manufacturer=USRobotics
Model=Courier/Sportster
# CONFIG:CLASS1:2886:.*:XON*|DEF*: Manufacturer=USRobotics
Model=Courier/Sportster
# CONFIG:CLASS1:3366:.*:XON*|DEF*: Manufacturer=USRobotics Model=Courier

#
# BEGIN-SERVER
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:  Class1  # use class 1 interface
ModemRate:  38400  # max rate for DCE-DTE communication
ModemFlowControl: xonxoff  # hardware flow control
#
ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1  # setup so DCD reflects carrier (or not)
ModemNoFlowCmd:  AT&H0&I0&R1 # setup modem for no flow control
ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow control
ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow control
ModemResultCodesCmd: ATQ0X4  # enable result codes
#
ModemMfrQueryCmd: !USR
ModemModelQueryCmd: ATI3
ModemRevQueryCmd: ATI7  # XXX returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd:  AT&H0&I0&R1 # setup modem for no flow control
Class1HFLOCmd:  AT&H1&I0&R2 # setup modem for hardware flow control
Class1SFLOCmd:  ""  # modem does this automatically
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
ModemSetupAACmd: AT+FCLASS=0 # leave modem idling in class 0
ModemAnswerCmd:  AT+FCLASS=1A # answer in Class 1

RingsBeforeAnswer: 5
LocalIdentifier: "Fabrice Cartron - APM-online"



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null