HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] [hylafax-devel] ATDT%s@ trick



Arjan Knepper <arjan@jak.nl> writes:

> > #
> > # We normally append the "@" symbol to the dial string so that
> > # the modem will wait 5 seconds before attempting to connect
> > # and return result codes that distinguish between no carrier
> > # and no answer.  This makes it possible to avoid problems with
> > # repeatedly dialing a number that doesn't have a fax machine
> > # (kudos to Stuart Lynne for this trick.)
> > #
> > ModemDialCmd:          ATDT%s@         # T for tone dialing, @ for silence
> > 
> > Can you explain me how this trick is *supposed* to work?
> 
> Yes please, because it ain't working here either.

I asked this because Hylafax currently treats "BUSY" and "NO ANSWER"
equally. My modem can be tuned to report "NO ANSWER" if the remote does not 
go off-hook after the specified number of rings. So I am going to make "NO
ANSWER" equal to "NO CARRIER" (directly or via additional config
parameter). But I would like to know before if this "ATDT%s@" trick really
makes sense.

Hope to hear from you soon,
Dmitry




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions